Byte to Mebibit Conversion Calculator: Free Online Tool

Convert bytes to mebibits with our free online data storage converter.

From:

Byte

To:

Mebibit

How to Use the Calculator:

Enter the value you want to convert in the 'From' field (Byte).
The converted value in Mebibit will appear automatically in the 'To' field.
Use the dropdown menus to select different units within the Data Storage category.
Click the swap button (⇌) to reverse the conversion direction.

How to Convert Byte to Mebibit

Converting Byte to Mebibit involves multiplying the value by a specific conversion factor, as shown in the formula below.

Formula:

1 Byte = 7.6294e-6 mebibits

Example Calculation:

Convert 1024 bytes: 1024 × 7.6294e-6 = 0.0078125 mebibits

Disclaimer: For Reference Only

These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.

Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.

What is a Byte and a Mebibit?

A byte is a unit of digital information that most commonly consists of 8 bits. Historically, the size of the byte has been hardware-dependent, but 8 bits is now universally accepted as the standard (also known as an octet).

A mebibit (Mib) is a unit of digital information equal to 220 bits, which is exactly 1,048,576 bits. It uses the binary prefix 'mebi-' established by the International Electrotechnical Commission (IEC). The mebibit is closely related to the megabit (Mb), which is defined using the decimal prefix 'mega-' (106 or 1,000,000 bits).

Note: The Byte is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Mebibit belongs to the imperial/US customary system.

History of the Byte and Mebibit

The term "byte" was coined by Werner Buchholz in 1956 during the early design phase for the IBM Stretch computer. It originally described a group of bits used to encode a single character, with the size varying (often 4 to 6 bits). The 8-bit byte became standard with the introduction of the IBM System/360 in the 1960s.

The prefix 'mebi-' (representing 220) was defined by the IEC in 1998 along with other binary prefixes (kibi-, gibi-, tebi-, etc.). This standardization aimed to eliminate the confusion caused by using SI prefixes (like kilo-, mega-, giga-) to denote both powers of 1000 (decimal) and powers of 1024 (binary) in computing contexts. The term 'mebibit' specifically refers to the 220 multiple of bits.

Common Uses for bytes and mebibits

Explore the typical applications for both Byte (imperial/US) and Mebibit (imperial/US) to understand their common contexts.

Common Uses for bytes

Measuring file sizes (e.g., kilobytes, megabytes, gigabytes).
Representing single characters in character encoding systems (like ASCII, UTF-8).
Quantifying computer memory (RAM) and storage capacity (hard drives, SSDs).
Defining data types in programming languages (e.g., byte, char).

Common Uses for mebibits

While less common in everyday usage than the megabit (Mb) – often used for network speeds (Mbps) – the mebibit is important where binary precision for bit quantities is required:

Specifying memory chip capacities or data bus widths in technical documentation where sizes are based on powers of 2.
Internal calculations within data communication protocols, hardware design, or software that operate on binary multiples.
Theoretical calculations in computer science, information theory, and data transmission analysis.
Ensuring accuracy when comparing binary (Mib) and decimal (Mb) data quantities, especially in storage and memory contexts.

Frequently Asked Questions

Questions About Byte (B)

How many bits are in a byte?

There are 8 bits in one byte according to the modern standard.

What's the difference between a bit (b) and a byte (B)?

A bit is the smallest unit (0 or 1), while a byte is a group of 8 bits. Data storage is usually measured in Bytes (B, KB, MB, GB), while data transfer rates are often measured in bits (bps, kbps, Mbps).

How many values can a byte represent?

An 8-bit byte can represent 2^8 = 256 different values (from 0 to 255).

Why 8 bits?

The 8-bit standard emerged partly because it efficiently represents powers of 2 and accommodates encoding schemes like ASCII, which initially used 7 bits plus a parity bit.

About Mebibit (Mib)

How many bits are in a mebibit?

There are exactly 220 bits in 1 mebibit (Mib). This equals 1,048,576 bits.

How many kibibits (Kib) are in a mebibit (Mib)?

There are 1,024 kibibits (Kib) in 1 mebibit (Mib). This is because 1 Mib = 220 bits and 1 Kib = 210 bits, and 220 / 210 = 210 = 1,024.

What is the difference between a mebibit (Mib) and a megabit (Mb)?

A mebibit (Mib) represents 220 bits (1,048,576 bits), using the binary prefix 'mebi-'. A megabit (Mb) represents 106 bits (1,000,000 bits), using the decimal prefix 'mega-'. A mebibit is approximately 4.86% larger than a megabit (1 Mib ≈ 1.0486 Mb).

What is the difference between a mebibit (Mib) and a mebibyte (MiB)?

A mebibit (Mib) measures information in bits, while a mebibyte (MiB) measures information in bytes. Assuming the standard 1 byte = 8 bits, 1 mebibyte (MiB) is equal to 8 mebibits (Mib). Both use the binary prefix 'mebi-' (220).

Conversion Table: Byte to Mebibit

Byte (B)	Mebibit (Mib)
1	0
5	0
10	0
25	0
50	0
100	0.001
500	0.004
1,000	0.008

All Data Storage Conversions

Bit to Byte Bit to Kilobit Bit to Kilobyte Bit to Megabit Bit to Megabyte Bit to Gigabit Bit to Gigabyte Bit to Terabit Bit to Terabyte Bit to Petabit Bit to Petabyte Bit to Exabit Bit to Exabyte Bit to Kibibit Bit to Kibibyte Bit to Mebibit Bit to Mebibyte Bit to Gibibit Bit to Gibibyte Bit to Tebibit Bit to Tebibyte Bit to Pebibit Bit to Pebibyte Bit to Exbibit Bit to Exbibyte Byte to Bit Byte to Kilobit Byte to Kilobyte Byte to Megabit Byte to Megabyte Byte to Gigabit Byte to Gigabyte Byte to Terabit Byte to Terabyte Byte to Petabit Byte to Petabyte Byte to Exabit Byte to Exabyte Byte to Kibibit Byte to Kibibyte Byte to Mebibyte Byte to Gibibit Byte to Gibibyte Byte to Tebibit Byte to Tebibyte Byte to Pebibit Byte to Pebibyte Byte to Exbibit Byte to Exbibyte Kilobit to Bit Kilobit to Byte Kilobit to Kilobyte Kilobit to Megabit Kilobit to Megabyte Kilobit to Gigabit Kilobit to Gigabyte Kilobit to Terabit Kilobit to Terabyte Kilobit to Petabit Kilobit to Petabyte Kilobit to Exabit Kilobit to Exabyte Kilobit to Kibibit Kilobit to Kibibyte Kilobit to Mebibit Kilobit to Mebibyte Kilobit to Gibibit Kilobit to Gibibyte Kilobit to Tebibit Kilobit to Tebibyte Kilobit to Pebibit Kilobit to Pebibyte Kilobit to Exbibit Kilobit to Exbibyte Kilobyte to Bit Kilobyte to Byte Kilobyte to Kilobit Kilobyte to Megabit Kilobyte to Megabyte Kilobyte to Gigabit Kilobyte to Gigabyte Kilobyte to Terabit Kilobyte to Terabyte Kilobyte to Petabit Kilobyte to Petabyte Kilobyte to Exabit Kilobyte to Exabyte Kilobyte to Kibibit Kilobyte to Kibibyte Kilobyte to Mebibit Kilobyte to Mebibyte Kilobyte to Gibibit Kilobyte to Gibibyte Kilobyte to Tebibit Kilobyte to Tebibyte Kilobyte to Pebibit Kilobyte to Pebibyte Kilobyte to Exbibit Kilobyte to Exbibyte Megabit to Bit Megabit to Byte Megabit to Kilobit Megabit to Kilobyte Megabit to Megabyte Megabit to Gigabit Megabit to Gigabyte Megabit to Terabit Megabit to Terabyte Megabit to Petabit Megabit to Petabyte Megabit to Exabit Megabit to Exabyte Megabit to Kibibit Megabit to Kibibyte Megabit to Mebibit Megabit to Mebibyte Megabit to Gibibit Megabit to Gibibyte Megabit to Tebibit Megabit to Tebibyte