Mebibyte to Gibibit Conversion Calculator: Free Online Tool
Convert mebibytes to gibibits with our free online data storage converter.
Mebibyte to Gibibit Calculator
How to Use the Calculator:
- Enter the value you want to convert in the 'From' field (Mebibyte).
- The converted value in Gibibit will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Data Storage category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Mebibyte to Gibibit
Converting Mebibyte to Gibibit involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Mebibyte = 0.0078125 gibibitsExample Calculation:
Convert 10 mebibytes: 10 × 0.0078125 = 0.078125 gibibits
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
What is a Mebibyte and a Gibibit?
A mebibyte (MiB) is a unit of digital information storage equal to 220 bytes, which is exactly 1,048,576 bytes (or 10242 bytes). It uses the binary prefix 'mebi-' established by the International Electrotechnical Commission (IEC). The mebibyte was created to provide an unambiguous measurement for byte multiples based on powers of 2, distinguishing it from the megabyte (MB), which is based on the decimal prefix 'mega-' (106 or 1,000,000 bytes).
A gibibit (Gib) is a unit of digital information equal to 230 bits, which is exactly 1,073,741,824 bits. It uses the binary prefix 'gibi-' established by the International Electrotechnical Commission (IEC). The gibibit is closely related to the gigabit (Gb), which is defined using the decimal prefix 'giga-' (109 bits).
Note: The Mebibyte is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Gibibit belongs to the imperial/US customary system.
History of the Mebibyte and Gibibit
The prefix 'mebi-' (representing 220) was defined by the IEC in 1998 alongside other binary prefixes (kibi-, gibi-, tebi-, etc.). Before this standard, the SI prefix 'mega-' (M) was ambiguously used to represent both 1,000,000 (106, as per its SI definition) and 1,048,576 (220) in computing contexts. This led to confusion, especially when comparing storage capacities advertised by manufacturers (often using decimal prefixes) and memory sizes or file sizes reported by operating systems (often using binary interpretations). The introduction of the mebibyte (MiB) aimed to resolve this ambiguity by providing a specific term for 1,048,576 bytes.
The prefix 'gibi-' (representing 230) was defined by the IEC in 1998 along with other binary prefixes (kibi-, mebi-, tebi-, etc.). This standardization aimed to eliminate the confusion caused by using SI prefixes (like kilo-, mega-, giga-) to denote both powers of 1000 (decimal) and powers of 1024 (binary) in computing contexts. The term 'gibibit' specifically refers to the 230 multiple of bits.
Common Uses for mebibytes and gibibits
Explore the typical applications for both Mebibyte (imperial/US) and Gibibit (imperial/US) to understand their common contexts.
Common Uses for mebibytes
Mebibytes are used in contexts where precision based on powers of 2 is necessary:
- Precisely measuring computer memory (RAM) capacity, which is typically manufactured in powers-of-2 sizes.
- Reporting file sizes and disk space usage by operating systems (like Windows, macOS, Linux distributions) and file systems that adhere to IEC standards.
- Software development, technical documentation, and virtualization where exact binary multiples are crucial for calculations, specifications, or resource allocation.
- Cache sizes in CPUs and other hardware components.
Common Uses for gibibits
While less common in everyday usage than the gigabit (Gb) which is often used for network speeds (Gbps), the gibibit is important where binary precision is required:
- Specifying memory chip capacities at the bit level in technical documentation.
- Internal calculations within networking hardware or software that operate on binary multiples.
- Theoretical calculations in computer science, information theory, and data transmission analysis.
- Comparing binary (Gib) and decimal (Gb) data quantities accurately.
Frequently Asked Questions
Questions About Mebibyte (MiB)
How many bytes are in a mebibyte (MiB)?
There are exactly 220 bytes in 1 mebibyte (MiB). This equals 1,048,576 bytes.
How many kibibytes (KiB) are in a mebibyte (MiB)?
There are 1,024 kibibytes (KiB) in 1 mebibyte (MiB). This follows the binary prefix system where 1 MiB = 220 bytes and 1 KiB = 210 bytes, and 220 / 210 = 210 = 1,024.
What is the difference between a mebibyte (MiB) and a megabyte (MB)?
A mebibyte (MiB) represents 220 bytes (1,048,576 bytes), using the IEC binary prefix 'mebi-'. A megabyte (MB) typically represents 106 bytes (1,000,000 bytes), using the SI decimal prefix 'mega-'. A mebibyte is approximately 4.86% larger than a megabyte (1 MiB ≈ 1.0486 MB). Use MiB for precision in binary contexts (like RAM, OS reporting) and MB for decimal contexts (like hard drive marketing, network speeds in some cases) or when the specific definition is clarified.
What is the difference between a mebibyte (MiB) and a mebibit (Mib)?
A mebibyte (MiB) measures information in bytes, while a mebibit (Mib) measures information in bits. Assuming the standard 1 byte = 8 bits, 1 mebibyte (MiB) is equal to 8 mebibits (Mib). Both use the binary prefix 'mebi-' (220).
Why is MiB used less often than MB in marketing?
Marketing materials (like hard drive capacities) often use the decimal prefix (MB, GB) because it results in a larger-looking number for capacity compared to the binary prefix (MiB, GiB) for the same amount of physical storage (e.g., 1,000,000,000 bytes is marketed as 1 GB, while an OS might report it as approximately 931 MiB, not GiB, because 1 GB is closer to 953.67 MiB, but OS often report GiB as GB). This discrepancy arises because 1 MB = 106 bytes, whereas 1 MiB = 220 bytes. Using decimal units allows manufacturers to advertise higher numbers.
About Gibibit (Gib)
How many bits are in a gibibit?
There are exactly 230 bits in 1 gibibit (Gib). This equals 1,073,741,824 bits.
How many mebibits (Mib) are in a gibibit (Gib)?
There are 1,024 mebibits (Mib) in 1 gibibit (Gib). This is because 1 Gib = 230 bits and 1 Mib = 220 bits, and 230 / 220 = 210 = 1,024.
What is the difference between a gibibit (Gib) and a gigabit (Gb)?
A gibibit (Gib) represents 230 bits (1,073,741,824 bits), using the binary prefix 'gibi-'. A gigabit (Gb) represents 109 bits (1,000,000,000 bits), using the decimal prefix 'giga-'. A gibibit is approximately 7.37% larger than a gigabit (1 Gib ≈ 1.074 Gb).
What is the difference between a gibibit (Gib) and a gibibyte (GiB)?
A gibibit (Gib) measures information in bits, while a gibibyte (GiB) measures information in bytes. Assuming the standard 1 byte = 8 bits, 1 gibibyte (GiB) is equal to 8 gibibits (Gib). Both use the binary prefix 'gibi-' (230).
Conversion Table: Mebibyte to Gibibit
| Mebibyte (MiB) | Gibibit (Gib) |
|---|---|
| 1 | 0.008 |
| 5 | 0.039 |
| 10 | 0.078 |
| 25 | 0.195 |
| 50 | 0.391 |
| 100 | 0.781 |
| 500 | 3.906 |
| 1,000 | 7.813 |