Mebibyte to Terabyte Conversion Calculator: Free Online Tool
Convert mebibytes to terabytes with our free online data storage converter.
Mebibyte to Terabyte Calculator
How to Use the Calculator:
- Enter the value you want to convert in the 'From' field (Mebibyte).
- The converted value in Terabyte will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Data Storage category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Mebibyte to Terabyte
Converting Mebibyte to Terabyte involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Mebibyte = 1.0486e-6 terabytesExample Calculation:
Convert 10 mebibytes: 10 × 1.0486e-6 = 1.0486e-5 terabytes
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
What is a Mebibyte and a Terabyte?
A mebibyte (MiB) is a unit of digital information storage equal to 220 bytes, which is exactly 1,048,576 bytes (or 10242 bytes). It uses the binary prefix 'mebi-' established by the International Electrotechnical Commission (IEC). The mebibyte was created to provide an unambiguous measurement for byte multiples based on powers of 2, distinguishing it from the megabyte (MB), which is based on the decimal prefix 'mega-' (106 or 1,000,000 bytes).
A terabyte (TB) is a multiple of the byte unit for digital information storage. The prefix tera- (symbol T) is defined in the International System of Units (SI) as a multiplier of 1012 (1 trillion, or 1 followed by 12 zeros). Therefore, 1 terabyte = 1,000,000,000,000 bytes. This is equivalent to 1,000 gigabytes (GB).
Note: The Mebibyte is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Terabyte belongs to the imperial/US customary system.
History of the Mebibyte and Terabyte
The prefix 'mebi-' (representing 220) was defined by the IEC in 1998 alongside other binary prefixes (kibi-, gibi-, tebi-, etc.). Before this standard, the SI prefix 'mega-' (M) was ambiguously used to represent both 1,000,000 (106, as per its SI definition) and 1,048,576 (220) in computing contexts. This led to confusion, especially when comparing storage capacities advertised by manufacturers (often using decimal prefixes) and memory sizes or file sizes reported by operating systems (often using binary interpretations). The introduction of the mebibyte (MiB) aimed to resolve this ambiguity by providing a specific term for 1,048,576 bytes.
The SI prefix 'tera-' (meaning 1012) was adopted for use in computing as storage capacities reached trillions of bytes. Historically, the term 'terabyte' was often used ambiguously to refer to either 1012 bytes (the strict SI definition) or 240 bytes (1,099,511,627,776 bytes), which is the power of 2 closest to a trillion. This ambiguity, particularly noticeable in how operating systems reported disk sizes versus how manufacturers advertised them, led the International Electrotechnical Commission (IEC) to introduce the distinct binary prefix 'tebi-' (Ti) for 240. Thus, tebibyte (TiB) specifically denotes 240 bytes, while terabyte (TB) formally refers to 1012 bytes.
Common Uses for mebibytes and terabytes
Explore the typical applications for both Mebibyte (imperial/US) and Terabyte (imperial/US) to understand their common contexts.
Common Uses for mebibytes
Mebibytes are used in contexts where precision based on powers of 2 is necessary:
- Precisely measuring computer memory (RAM) capacity, which is typically manufactured in powers-of-2 sizes.
- Reporting file sizes and disk space usage by operating systems (like Windows, macOS, Linux distributions) and file systems that adhere to IEC standards.
- Software development, technical documentation, and virtualization where exact binary multiples are crucial for calculations, specifications, or resource allocation.
- Cache sizes in CPUs and other hardware components.
Common Uses for terabytes
Terabytes are widely used to measure large amounts of digital data storage capacity:
- Specifying the capacity of consumer and enterprise hard disk drives (HDDs) and solid-state drives (SSDs).
- Measuring the size of large files, databases, archives, and backups.
- Quantifying the storage space available in cloud storage plans and data centers.
- Describing the amount of data transferred over networks or used in monthly internet data caps.
- Indicating the capacity of personal computers, laptops, external drives, and network-attached storage (NAS) devices.
Frequently Asked Questions
Questions About Mebibyte (MiB)
How many bytes are in a mebibyte (MiB)?
There are exactly 220 bytes in 1 mebibyte (MiB). This equals 1,048,576 bytes.
How many kibibytes (KiB) are in a mebibyte (MiB)?
There are 1,024 kibibytes (KiB) in 1 mebibyte (MiB). This follows the binary prefix system where 1 MiB = 220 bytes and 1 KiB = 210 bytes, and 220 / 210 = 210 = 1,024.
What is the difference between a mebibyte (MiB) and a megabyte (MB)?
A mebibyte (MiB) represents 220 bytes (1,048,576 bytes), using the IEC binary prefix 'mebi-'. A megabyte (MB) typically represents 106 bytes (1,000,000 bytes), using the SI decimal prefix 'mega-'. A mebibyte is approximately 4.86% larger than a megabyte (1 MiB ≈ 1.0486 MB). Use MiB for precision in binary contexts (like RAM, OS reporting) and MB for decimal contexts (like hard drive marketing, network speeds in some cases) or when the specific definition is clarified.
What is the difference between a mebibyte (MiB) and a mebibit (Mib)?
A mebibyte (MiB) measures information in bytes, while a mebibit (Mib) measures information in bits. Assuming the standard 1 byte = 8 bits, 1 mebibyte (MiB) is equal to 8 mebibits (Mib). Both use the binary prefix 'mebi-' (220).
Why is MiB used less often than MB in marketing?
Marketing materials (like hard drive capacities) often use the decimal prefix (MB, GB) because it results in a larger-looking number for capacity compared to the binary prefix (MiB, GiB) for the same amount of physical storage (e.g., 1,000,000,000 bytes is marketed as 1 GB, while an OS might report it as approximately 931 MiB, not GiB, because 1 GB is closer to 953.67 MiB, but OS often report GiB as GB). This discrepancy arises because 1 MB = 106 bytes, whereas 1 MiB = 220 bytes. Using decimal units allows manufacturers to advertise higher numbers.
About Terabyte (TB)
How many bytes are in a terabyte (TB)?
According to the standard SI definition, there are exactly 1,000,000,000,000 bytes (one trillion bytes, or 1012 bytes) in 1 terabyte (TB).
How many gigabytes (GB) are in a terabyte (TB)?
There are 1,000 gigabytes (GB) in 1 terabyte (TB). This follows the SI prefixes: 1 TB = 1012 bytes and 1 GB = 109 bytes. Therefore, 1 TB / 1 GB = 1012 / 109 = 103 = 1,000.
What is the difference between a terabyte (TB) and a tebibyte (TiB)?
- A terabyte (TB) uses the decimal SI prefix 'tera-' and equals 1012 bytes (1,000,000,000,000 bytes). It's commonly used in storage device marketing.
- A tebibyte (TiB) uses the binary IEC prefix 'tebi-' and equals 240 bytes (1,099,511,627,776 bytes). It's often used by operating systems to report storage capacity based on powers of 2. A tebibyte (TiB) is approximately 9.95% larger than a terabyte (TB) (1 TiB ≈ 1.0995 TB).
What is the difference between a terabyte (TB) and a terabit (Tb)?
- A terabyte (TB) measures data storage capacity in bytes and equals 1012 bytes.
- A terabit (Tb) measures data quantity or data transfer speed in bits and equals 1012 bits. Assuming the standard definition of 1 byte = 8 bits, 1 terabyte (TB) is equal to 8 terabits (Tb). Calculation: 1 TB = 1012 bytes = 1012 * 8 bits = 8 * 1012 bits = 8 Tb. Therefore, a terabyte represents 8 times more data storage capacity than the equivalent number of terabits.
Why is TB often used in marketing instead of TiB?
Storage manufacturers typically market drive capacities using the decimal prefix terabyte (TB) because 1012 bytes yields a larger, rounder number compared to the equivalent value expressed using the binary prefix tebibyte (TiB) (which is 240 bytes). For instance, a hard drive containing exactly 1,000,000,000,000 bytes is advertised as 1 TB. If measured in tebibytes, this same physical capacity would be approximately 0.909 TiB (since 1012 / 240 ≈ 0.909). Using TB allows manufacturers to present higher capacity figures, which is advantageous for marketing, even though operating systems might report the capacity using the smaller TiB value.
Conversion Table: Mebibyte to Terabyte
| Mebibyte (MiB) | Terabyte (TB) |
|---|---|
| 1 | 0 |
| 5 | 0 |
| 10 | 0 |
| 25 | 0 |
| 50 | 0 |
| 100 | 0 |
| 500 | 0.001 |
| 1,000 | 0.001 |