Megabit to Tebibit Conversion Calculator: Free Online Tool
Convert megabits to tebibits with our free online data storage converter.
Megabit to Tebibit Calculator
How to Use the Calculator:
- Enter the value you want to convert in the 'From' field (Megabit).
- The converted value in Tebibit will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Data Storage category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Megabit to Tebibit
Converting Megabit to Tebibit involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Megabit = 9.0949e-7 tebibits
Example Calculation:
Convert 10 megabits: 10 × 9.0949e-7 = 9.0949e-6 tebibits
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
What is a Megabit and a Tebibit?
A megabit (Mb or Mbit) is a multiple of the bit unit for digital information or computer storage. The prefix mega- (symbol M) is defined in the International System of Units (SI) as a multiplier of 106 (1 million). Therefore, 1 megabit = 1,000,000 bits (or 1000 kilobits).
A tebibit (Tib) is a unit of digital information equal to 240 bits, which is exactly 1,099,511,627,776 bits. It uses the binary prefix 'tebi-' established by the International Electrotechnical Commission (IEC). The tebibit is closely related to the terabit (Tb), which is defined using the decimal prefix 'tera-' (1012 or 1,000,000,000,000 bits).
Note: The Megabit is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Tebibit belongs to the imperial/US customary system.
History of the Megabit and Tebibit
As data transfer speeds increased beyond the kilobit range, the megabit became a common unit, particularly in networking and telecommunications. Like the kilobit, it generally adheres to the SI standard (106 bits) rather than the binary interpretation sometimes used for bytes (which would be 220 bits, correctly termed a mebibit). The introduction of binary prefixes like 'mebi-' aimed to resolve this potential ambiguity.
The prefix 'tebi-' (representing 240) was defined by the IEC in 1998 along with other binary prefixes (kibi-, mebi-, gibi-, pebi-, etc.). This standardization aimed to eliminate the confusion caused by using SI prefixes (like kilo-, mega-, giga-, tera-) to denote both powers of 1000 (decimal) and powers of 1024 (binary) in computing contexts, which became particularly problematic for larger quantities like terabytes vs. tebibytes. The term 'tebibit' specifically refers to the 240 multiple of bits.
Common Uses for megabits and tebibits
Explore the typical applications for both Megabit (imperial/US) and Tebibit (imperial/US) to understand their common contexts.
Common Uses for megabits
- Measuring data transfer rates (e.g., internet connection speeds in Mbps - megabits per second).
- Quantifying network bandwidth.
- Specifying the capacity of older storage media or certain types of memory chips.
- Video and audio bitrates (e.g., streaming quality often measured in Mbps).
Common Uses for tebibits
Tebibits are used in contexts dealing with large amounts of data where binary precision is important:
- Specifying the capacity of large memory modules (RAM), solid-state drives (SSDs), or storage systems in technical documentation where sizes are based on powers of 2 at the bit level.
- Calculations in computer architecture, data storage design, and network engineering involving large binary data structures.
- Theoretical calculations in computer science, information theory, and high-speed data transmission analysis.
- Ensuring accuracy when comparing binary (Tib) and decimal (Tb) data quantities, especially in storage capacity planning or analyzing network throughput versus actual data stored. While terabits (Tb) are common for network speeds (Tbps), tebibits provide precision for binary-based storage or memory calculations.
Frequently Asked Questions
Questions About Megabit (Mb)
How many bits are in a megabit?
There are exactly 1,000,000 bits (or 106 bits) in 1 megabit (Mb), based on the standard SI definition of the prefix 'mega-'.
What is the difference between a megabit (Mb) and a megabyte (MB)?
- A megabit (Mb) measures bits and equals 1,000,000 bits. It's often used for data transfer rates.
- A megabyte (MB) measures bytes. According to SI standards, it equals 1,000,000 bytes. (Note: Historically, MB was sometimes used informally for 1,048,576 bytes, which is correctly termed a mebibyte (MiB)).
Since 1 byte = 8 bits, 1 megabyte (1,000,000 bytes) is equal to 8,000,000 bits. Therefore, a megabyte represents 8 times more data than a megabit.
What is the difference between a megabit (Mb) and a mebibit (Mib)?
- A megabit (Mb) uses the decimal SI prefix 'mega-' and equals 106 bits (1,000,000 bits).
- A mebibit (Mib) uses the binary IEC prefix 'mebi-' and equals 220 bits (1,048,576 bits).
A mebibit is approximately 4.86% larger than a megabit (1 Mib ≈ 1.0486 Mb). Using Mib provides clarity when specifically referring to 1,048,576 bits.
If my internet speed is 100 Mbps, how fast is that in MBps?
To convert Mbps (megabits per second) to MBps (megabytes per second), you divide by 8 (since 1 byte = 8 bits). So, 100 Mbps / 8 = 12.5 MBps. This means you can theoretically download 12.5 megabytes of data per second.
About Tebibit (Tib)
How many bits are in a tebibit?
There are exactly 240 bits in 1 tebibit (Tib). This equals 1,099,511,627,776 bits.
How many gibibits (Gib) are in a tebibit (Tib)?
There are 1,024 gibibits (Gib) in 1 tebibit (Tib). This is because 1 Tib = 240 bits and 1 Gib = 230 bits, and 240 / 230 = 210 = 1,024.
What is the difference between a tebibit (Tib) and a terabit (Tb)?
- A tebibit (Tib) represents 240 bits (1,099,511,627,776 bits), using the binary prefix 'tebi-'.
- A terabit (Tb) represents 1012 bits (1,000,000,000,000 bits), using the decimal prefix 'tera-'. A tebibit is approximately 9.95% larger than a terabit (1 Tib ≈ 1.0995 Tb).
What is the difference between a tebibit (Tib) and a tebibyte (TiB)?
A tebibit (Tib) measures information in bits, while a tebibyte (TiB) measures information in bytes. Assuming the standard 1 byte = 8 bits, 1 tebibyte (TiB) is equal to 8 tebibits (Tib). Both use the binary prefix 'tebi-' (240).
Conversion Table: Megabit to Tebibit
Megabit (Mb) | Tebibit (Tib) |
---|---|
1 | 0 |
5 | 0 |
10 | 0 |
25 | 0 |
50 | 0 |
100 | 0 |
500 | 0.001 |
1,000 | 0.001 |
All Data Storage Conversions
Other Units from Data Storage
- Bit (b)
- Byte (B)
- Kilobit (kb)
- Kilobyte (KB)
- Megabyte (MB)
- Gigabit (Gb)
- Gigabyte (GB)
- Terabit (Tb)
- Terabyte (TB)
- Petabit (Pb)
- Petabyte (PB)
- Exabit (Eb)
- Exabyte (EB)
- Kibibit (Kib)
- Kibibyte (KiB)
- Mebibit (Mib)
- Mebibyte (MiB)
- Gibibit (Gib)
- Gibibyte (GiB)
- Tebibyte (TiB)
- Pebibit (Pib)
- Pebibyte (PiB)
- Exbibit (Eib)
- Exbibyte (EiB)