Pebibit to Megabit Conversion Calculator: Free Online Tool
Convert pebibits to megabits with our free online data storage converter.
Pebibit to Megabit Calculator
How to Use the Calculator:
- Enter the value you want to convert in the 'From' field (Pebibit).
- The converted value in Megabit will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Data Storage category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Pebibit to Megabit
Converting Pebibit to Megabit involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Pebibit = 1.1259e+9 megabits
Example Calculation:
Convert 10 pebibits: 10 × 1.1259e+9 = 1.1259e+10 megabits
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
What is a Pebibit and a Megabit?
A pebibit (Pib) is a unit of digital information equal to 250 bits, which is exactly 1,125,899,906,842,624 bits. It uses the binary prefix 'pebi-' established by the International Electrotechnical Commission (IEC). The pebibit is closely related to the petabit (Pb), which is defined using the decimal prefix 'peta-' (1015 or 1,000,000,000,000,000 bits).
A megabit (Mb or Mbit) is a multiple of the bit unit for digital information or computer storage. The prefix mega- (symbol M) is defined in the International System of Units (SI) as a multiplier of 106 (1 million). Therefore, 1 megabit = 1,000,000 bits (or 1000 kilobits).
Note: The Pebibit is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Megabit belongs to the imperial/US customary system.
History of the Pebibit and Megabit
The prefix 'pebi-' (representing 250) was defined by the IEC in 1998 along with other binary prefixes (kibi-, mebi-, gibi-, tebi-, exbi-). This standardization aimed to eliminate the confusion caused by using SI prefixes (like kilo-, mega-, giga-, tera-, peta-) to denote both powers of 1000 (decimal) and powers of 1024 (binary) in computing contexts, especially for large quantities of data. The term 'pebibit' specifically refers to the 250 multiple of bits.
As data transfer speeds increased beyond the kilobit range, the megabit became a common unit, particularly in networking and telecommunications. Like the kilobit, it generally adheres to the SI standard (106 bits) rather than the binary interpretation sometimes used for bytes (which would be 220 bits, correctly termed a mebibit). The introduction of binary prefixes like 'mebi-' aimed to resolve this potential ambiguity.
Common Uses for pebibits and megabits
Explore the typical applications for both Pebibit (imperial/US) and Megabit (imperial/US) to understand their common contexts.
Common Uses for pebibits
Pebibits are used in contexts dealing with extremely large amounts of data where binary precision is crucial:
- Specifying the capacity of very large-scale storage systems or data archives at the bit level in technical documentation.
- Calculations in high-performance computing (HPC), large dataset analysis, and scientific simulations involving massive bit streams.
- Theoretical calculations in computer science, information theory, and advanced data transmission analysis.
- Ensuring accuracy when comparing binary (Pib) and decimal (Pb) data quantities in contexts like large network traffic analysis or storage capacity planning. While petabits (Pb) are more common for network throughput (Pbps), pebibits provide precision for binary-based storage or memory calculations at this scale.
Common Uses for megabits
- Measuring data transfer rates (e.g., internet connection speeds in Mbps - megabits per second).
- Quantifying network bandwidth.
- Specifying the capacity of older storage media or certain types of memory chips.
- Video and audio bitrates (e.g., streaming quality often measured in Mbps).
Frequently Asked Questions
Questions About Pebibit (Pib)
How many bits are in a pebibit?
There are exactly 250 bits in 1 pebibit (Pib). This equals 1,125,899,906,842,624 bits.
How many tebibits (Tib) are in a pebibit (Pib)?
There are 1,024 tebibits (Tib) in 1 pebibit (Pib). This is because 1 Pib = 250 bits and 1 Tib = 240 bits, and 250 / 240 = 210 = 1,024.
What is the difference between a pebibit (Pib) and a petabit (Pb)?
A pebibit (Pib) represents 250 bits (1,125,899,906,842,624 bits), using the binary prefix 'pebi-'. A petabit (Pb) represents 1015 bits (1,000,000,000,000,000 bits), using the decimal prefix 'peta-'. A pebibit is approximately 12.6% larger than a petabit (1 Pib ≈ 1.126 Pb).
What is the difference between a pebibit (Pib) and a pebibyte (PiB)?
A pebibit (Pib) measures information in bits, while a pebibyte (PiB) measures information in bytes. Assuming the standard 1 byte = 8 bits, 1 pebibyte (PiB) is equal to 8 pebibits (Pib). Both use the binary prefix 'pebi-' (250).
About Megabit (Mb)
How many bits are in a megabit?
There are exactly 1,000,000 bits (or 106 bits) in 1 megabit (Mb), based on the standard SI definition of the prefix 'mega-'.
What is the difference between a megabit (Mb) and a megabyte (MB)?
- A megabit (Mb) measures bits and equals 1,000,000 bits. It's often used for data transfer rates.
- A megabyte (MB) measures bytes. According to SI standards, it equals 1,000,000 bytes. (Note: Historically, MB was sometimes used informally for 1,048,576 bytes, which is correctly termed a mebibyte (MiB)).
Since 1 byte = 8 bits, 1 megabyte (1,000,000 bytes) is equal to 8,000,000 bits. Therefore, a megabyte represents 8 times more data than a megabit.
What is the difference between a megabit (Mb) and a mebibit (Mib)?
- A megabit (Mb) uses the decimal SI prefix 'mega-' and equals 106 bits (1,000,000 bits).
- A mebibit (Mib) uses the binary IEC prefix 'mebi-' and equals 220 bits (1,048,576 bits).
A mebibit is approximately 4.86% larger than a megabit (1 Mib ≈ 1.0486 Mb). Using Mib provides clarity when specifically referring to 1,048,576 bits.
If my internet speed is 100 Mbps, how fast is that in MBps?
To convert Mbps (megabits per second) to MBps (megabytes per second), you divide by 8 (since 1 byte = 8 bits). So, 100 Mbps / 8 = 12.5 MBps. This means you can theoretically download 12.5 megabytes of data per second.
Conversion Table: Pebibit to Megabit
Pebibit (Pib) | Megabit (Mb) |
---|---|
1 | 1,125,899,906.843 |
5 | 5,629,499,534.213 |
10 | 11,258,999,068.426 |
25 | 28,147,497,671.066 |
50 | 56,294,995,342.131 |
100 | 112,589,990,684.262 |
500 | 562,949,953,421.312 |
1,000 | 1,125,899,906,842.624 |
All Data Storage Conversions
Other Units from Data Storage
- Bit (b)
- Byte (B)
- Kilobit (kb)
- Kilobyte (KB)
- Megabyte (MB)
- Gigabit (Gb)
- Gigabyte (GB)
- Terabit (Tb)
- Terabyte (TB)
- Petabit (Pb)
- Petabyte (PB)
- Exabit (Eb)
- Exabyte (EB)
- Kibibit (Kib)
- Kibibyte (KiB)
- Mebibit (Mib)
- Mebibyte (MiB)
- Gibibit (Gib)
- Gibibyte (GiB)
- Tebibit (Tib)
- Tebibyte (TiB)
- Pebibyte (PiB)
- Exbibit (Eib)
- Exbibyte (EiB)