Pebibyte to Megabit Converter
Convert pebibytes to megabits with our free online data storage converter.
Quick Answer
1 Pebibyte = 9007199254.740992 megabits
Formula: Pebibyte × conversion factor = Megabit
Use the calculator below for instant, accurate conversions.
Our Accuracy Guarantee
All conversion formulas on UnitsConverter.io have been verified against NIST (National Institute of Standards and Technology) guidelines and international SI standards. Our calculations are accurate to 10 decimal places for standard conversions and use arbitrary precision arithmetic for astronomical units.
Pebibyte to Megabit Calculator
How to Use the Pebibyte to Megabit Calculator:
- Enter the value you want to convert in the 'From' field (Pebibyte).
- The converted value in Megabit will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Data Storage category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Pebibyte to Megabit: Step-by-Step Guide
Converting Pebibyte to Megabit involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Pebibyte = 9.0072e+9 megabitsExample Calculation:
Convert 10 pebibytes: 10 × 9.0072e+9 = 9.0072e+10 megabits
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
Need to convert to other data storage units?
View all Data Storage conversions →What is a Pebibyte and a Megabit?
A pebibyte (PiB) is a unit of digital information storage equal to 250 bytes, which is exactly 1,125,899,906,842,624 bytes (or 10245 bytes). It uses the binary prefix 'pebi-' established by the International Electrotechnical Commission (IEC). The pebibyte was created to provide an unambiguous measurement for byte multiples based on powers of 2, distinguishing it from the petabyte (PB), which is based on the decimal prefix 'peta-' (1015 or 1,000,000,000,000,000 bytes).
A megabit (Mb or Mbit) is a multiple of the bit unit for digital information or computer storage. The prefix mega- (symbol M) is defined in the International System of Units (SI) as a multiplier of 106 (1 million). Therefore, 1 megabit = 1,000,000 bits (or 1000 kilobits).
Note: The Pebibyte is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Megabit belongs to the imperial/US customary system.
History of the Pebibyte and Megabit
The prefix 'pebi-' (representing 250) was defined by the IEC in 1998 alongside other binary prefixes (kibi-, mebi-, gibi-, tebi-, exbi-). Before this standard, the SI prefix 'peta-' (P) was ambiguously used to represent both 1,000,000,000,000,000 (1015, as per its SI definition) and 1,125,899,906,842,624 (250) in computing contexts, especially for very large data volumes. This led to significant confusion when comparing storage capacities advertised by manufacturers (often using decimal prefixes) and those reported by operating systems or used in technical specifications (often using binary interpretations). The introduction of the pebibyte (PiB) aimed to resolve this ambiguity by providing a specific term for 250 bytes.
As data transfer speeds increased beyond the kilobit range, the megabit became a common unit, particularly in networking and telecommunications. Like the kilobit, it generally adheres to the SI standard (106 bits) rather than the binary interpretation sometimes used for bytes (which would be 220 bits, correctly termed a mebibit). The introduction of binary prefixes like 'mebi-' aimed to resolve this potential ambiguity.
Common Uses and Applications: pebibytes vs megabits
Explore the typical applications for both Pebibyte (imperial/US) and Megabit (imperial/US) to understand their common contexts.
Common Uses for pebibytes
Pebibytes are used in contexts dealing with extremely large amounts of data storage where precision based on powers of 2 is necessary:
- Measuring the capacity of very large-scale storage systems, data centers, and cloud storage infrastructure.
- Reporting file system sizes and disk space usage by operating systems for extremely large volumes, especially where IEC standards are followed.
- High-performance computing (HPC), large dataset analysis (Big Data), scientific research, and simulations involving massive data storage requirements.
- Technical specifications for enterprise-level storage hardware and software where exact binary multiples are crucial.
- Archiving and backup systems handling petabyte-scale data.
When to Use megabits
- Measuring data transfer rates (e.g., internet connection speeds in Mbps - megabits per second).
- Quantifying network bandwidth.
- Specifying the capacity of older storage media or certain types of memory chips.
- Video and audio bitrates (e.g., streaming quality often measured in Mbps).
Additional Unit Information
About Pebibyte (PiB)
How many bytes are in a pebibyte (PiB)?
There are exactly 250 bytes in 1 pebibyte (PiB). This equals 1,125,899,906,842,624 bytes.
How many tebibytes (TiB) are in a pebibyte (PiB)?
There are 1,024 tebibytes (TiB) in 1 pebibyte (PiB). This follows the binary prefix system where 1 PiB = 250 bytes and 1 TiB = 240 bytes, and 250 / 240 = 210 = 1,024.
What is the difference between a pebibyte (PiB) and a petabyte (PB)?
A pebibyte (PiB) represents 250 bytes (1,125,899,906,842,624 bytes), using the IEC binary prefix 'pebi-'. A petabyte (PB) typically represents 1015 bytes (1,000,000,000,000,000 bytes), using the SI decimal prefix 'peta-'. A pebibyte is approximately 12.6% larger than a petabyte (1 PiB ≈ 1.126 PB). Use PiB for precision in binary contexts (like large-scale OS reporting, HPC storage) and PB for decimal contexts (like marketing large storage systems) or when the specific definition is clarified.
What is the difference between a pebibyte (PiB) and a pebibit (Pib)?
A pebibyte (PiB) measures information in bytes, while a pebibit (Pib) measures information in bits. Assuming the standard 1 byte = 8 bits, 1 pebibyte (PiB) is equal to 8 pebibits (Pib). Both use the binary prefix 'pebi-' (250).
Why is PiB used less often than PB in marketing?
Marketing materials for large storage systems often use the decimal prefix (PB, EB) because it results in a larger-looking number for capacity compared to the binary prefix (PiB, EiB) for the same amount of physical storage. For example, 1015 bytes is marketed as 1 PB, while an OS might report a similar capacity using PiB (1 PB is approximately 0.888 PiB). Using decimal units allows manufacturers to advertise higher, rounder numbers, even though technical contexts often rely on binary measurements.
About Megabit (Mb)
How many bits are in a megabit?
There are exactly 1,000,000 bits (or 106 bits) in 1 megabit (Mb), based on the standard SI definition of the prefix 'mega-'.
What is the difference between a megabit (Mb) and a megabyte (MB)?
- A megabit (Mb) measures bits and equals 1,000,000 bits. It's often used for data transfer rates.
- A megabyte (MB) measures bytes. According to SI standards, it equals 1,000,000 bytes. (Note: Historically, MB was sometimes used informally for 1,048,576 bytes, which is correctly termed a mebibyte (MiB)).
Since 1 byte = 8 bits, 1 megabyte (1,000,000 bytes) is equal to 8,000,000 bits. Therefore, a megabyte represents 8 times more data than a megabit.
What is the difference between a megabit (Mb) and a mebibit (Mib)?
- A megabit (Mb) uses the decimal SI prefix 'mega-' and equals 106 bits (1,000,000 bits).
- A mebibit (Mib) uses the binary IEC prefix 'mebi-' and equals 220 bits (1,048,576 bits).
A mebibit is approximately 4.86% larger than a megabit (1 Mib ≈ 1.0486 Mb). Using Mib provides clarity when specifically referring to 1,048,576 bits.
If my internet speed is 100 Mbps, how fast is that in MBps?
To convert Mbps (megabits per second) to MBps (megabytes per second), you divide by 8 (since 1 byte = 8 bits). So, 100 Mbps / 8 = 12.5 MBps. This means you can theoretically download 12.5 megabytes of data per second.
Conversion Table: Pebibyte to Megabit
| Pebibyte (PiB) | Megabit (Mb) |
|---|---|
| 0.5 | 4,503,599,627.371 |
| 1 | 9,007,199,254.741 |
| 1.5 | 13,510,798,882.112 |
| 2 | 18,014,398,509.482 |
| 5 | 45,035,996,273.705 |
| 10 | 90,071,992,547.41 |
| 25 | 225,179,981,368.525 |
| 50 | 450,359,962,737.05 |
| 100 | 900,719,925,474.099 |
| 250 | 2,251,799,813,685.248 |
| 500 | 4,503,599,627,370.496 |
| 1,000 | 9,007,199,254,740.992 |
People Also Ask
How do I convert Pebibyte to Megabit?
To convert Pebibyte to Megabit, enter the value in Pebibyte in the calculator above. The conversion will happen automatically. Use our free online converter for instant and accurate results. You can also visit our data storage converter page to convert between other units in this category.
Learn more →What is the conversion factor from Pebibyte to Megabit?
The conversion factor depends on the specific relationship between Pebibyte and Megabit. You can find the exact conversion formula and factor on this page. Our calculator handles all calculations automatically. See the conversion table above for common values.
Can I convert Megabit back to Pebibyte?
Yes! You can easily convert Megabit back to Pebibyte by using the swap button (⇌) in the calculator above, or by visiting our Megabit to Pebibyte converter page. You can also explore other data storage conversions on our category page.
Learn more →What are common uses for Pebibyte and Megabit?
Pebibyte and Megabit are both standard units used in data storage measurements. They are commonly used in various applications including engineering, construction, cooking, and scientific research. Browse our data storage converter for more conversion options.
For more data storage conversion questions, visit our FAQ page or explore our conversion guides.
Helpful Conversion Guides
Learn more about unit conversion with our comprehensive guides:
📚 How to Convert Units
Step-by-step guide to unit conversion with practical examples.
🔢 Conversion Formulas
Essential formulas for data storage and other conversions.
⚖️ Metric vs Imperial
Understand the differences between measurement systems.
⚠️ Common Mistakes
Learn about frequent errors and how to avoid them.
All Data Storage Conversions
Other Data Storage Units and Conversions
Explore other data storage units and their conversion options:
- Bit (b) • Pebibyte to Bit
- Byte (B) • Pebibyte to Byte
- Kilobit (kb) • Pebibyte to Kilobit
- Kilobyte (KB) • Pebibyte to Kilobyte
- Megabyte (MB) • Pebibyte to Megabyte
- Gigabit (Gb) • Pebibyte to Gigabit
- Gigabyte (GB) • Pebibyte to Gigabyte
- Terabit (Tb) • Pebibyte to Terabit
- Terabyte (TB) • Pebibyte to Terabyte
- Petabit (Pb) • Pebibyte to Petabit
Verified Against Authority Standards
All conversion formulas have been verified against international standards and authoritative sources to ensure maximum accuracy and reliability.
International Electrotechnical Commission — Binary prefixes for digital storage (KiB, MiB, GiB)
International Organization for Standardization — International standards for quantities and units
Last verified: December 3, 2025