Petabyte to Mebibyte Converter
Convert petabytes to mebibytes with our free online data storage converter.
Quick Answer
1 Petabyte = 953674316.40625 mebibytes
Formula: Petabyte × conversion factor = Mebibyte
Use the calculator below for instant, accurate conversions.
Our Accuracy Guarantee
All conversion formulas on UnitsConverter.io have been verified against NIST (National Institute of Standards and Technology) guidelines and international SI standards. Our calculations are accurate to 10 decimal places for standard conversions and use arbitrary precision arithmetic for astronomical units.
Petabyte to Mebibyte Calculator
How to Use the Petabyte to Mebibyte Calculator:
- Enter the value you want to convert in the 'From' field (Petabyte).
- The converted value in Mebibyte will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Data Storage category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Petabyte to Mebibyte: Step-by-Step Guide
Converting Petabyte to Mebibyte involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Petabyte = 9.5367e+8 mebibytesExample Calculation:
Convert 10 petabytes: 10 × 9.5367e+8 = 9.5367e+9 mebibytes
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
Need to convert to other data storage units?
View all Data Storage conversions →What is a Petabyte and a Mebibyte?
A petabyte (PB) is a multiple of the byte unit for digital information storage. The prefix peta- (symbol P) is defined in the International System of Units (SI) as a multiplier of 1015 (1 quadrillion, or 1 followed by 15 zeros). Therefore, 1 petabyte = 1,000,000,000,000,000 bytes. This is equivalent to 1,000 terabytes (TB) or 1,000,000 gigabytes (GB). The petabyte is distinct from the pebibyte (PiB), which uses the binary prefix 'pebi-' established by the International Electrotechnical Commission (IEC) and equals 250 bytes.
A mebibyte (MiB) is a unit of digital information storage equal to 220 bytes, which is exactly 1,048,576 bytes (or 10242 bytes). It uses the binary prefix 'mebi-' established by the International Electrotechnical Commission (IEC). The mebibyte was created to provide an unambiguous measurement for byte multiples based on powers of 2, distinguishing it from the megabyte (MB), which is based on the decimal prefix 'mega-' (106 or 1,000,000 bytes).
Note: The Petabyte is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Mebibyte belongs to the imperial/US customary system.
History of the Petabyte and Mebibyte
The prefix 'peta-' originates from the Greek word "pente," meaning five (as 1015 = 10005), and was officially adopted as an SI prefix in 1975. In computing and data storage, the term 'petabyte' became necessary as data volumes grew exponentially beyond the terabyte scale in the late 20th and early 21st centuries. Initially, like other SI prefixes (kilo-, mega-, giga-, tera-), 'peta-' was sometimes ambiguously used by some to refer to the nearest power of 2 (250). However, the formal adoption of binary prefixes like 'pebi-' (Pi) by the IEC in 1998 aimed to resolve this confusion, clarifying that petabyte (PB) should strictly refer to 1015 bytes, while pebibyte (PiB) refers to 250 bytes. Despite standardization, the term PB is still sometimes used loosely in casual contexts, but in technical specifications and marketing, PB almost always means 1015 bytes.
The prefix 'mebi-' (representing 220) was defined by the IEC in 1998 alongside other binary prefixes (kibi-, gibi-, tebi-, etc.). Before this standard, the SI prefix 'mega-' (M) was ambiguously used to represent both 1,000,000 (106, as per its SI definition) and 1,048,576 (220) in computing contexts. This led to confusion, especially when comparing storage capacities advertised by manufacturers (often using decimal prefixes) and memory sizes or file sizes reported by operating systems (often using binary interpretations). The introduction of the mebibyte (MiB) aimed to resolve this ambiguity by providing a specific term for 1,048,576 bytes.
Common Uses and Applications: petabytes vs mebibytes
Explore the typical applications for both Petabyte (imperial/US) and Mebibyte (imperial/US) to understand their common contexts.
Common Uses for petabytes
Petabytes are used to quantify extremely large amounts of digital storage and data:
- Capacity of large-scale data centers, cloud storage platforms (e.g., Google Drive, AWS S3, Azure Blob Storage), and enterprise storage systems.
- Big data analytics, involving the processing and storage of vast datasets for scientific research (like genomics, particle physics, astronomy), business intelligence, and machine learning model training.
- National digital archives, large media libraries, and corporate data repositories storing historical records, high-resolution multimedia content, or extensive backups.
- High-performance computing (HPC) environments managing massive simulation outputs or experimental data collections.
- Large-scale video surveillance systems storing continuous high-resolution footage from numerous cameras.
- Quantifying the total amount of data generated globally or traversing major internet backbones over periods.
When to Use mebibytes
Mebibytes are used in contexts where precision based on powers of 2 is necessary:
- Precisely measuring computer memory (RAM) capacity, which is typically manufactured in powers-of-2 sizes.
- Reporting file sizes and disk space usage by operating systems (like Windows, macOS, Linux distributions) and file systems that adhere to IEC standards.
- Software development, technical documentation, and virtualization where exact binary multiples are crucial for calculations, specifications, or resource allocation.
- Cache sizes in CPUs and other hardware components.
Additional Unit Information
About Petabyte (PB)
How many bytes are in a petabyte (PB)?
There are exactly 1,000,000,000,000,000 bytes (one quadrillion bytes, or 1015 bytes) in 1 petabyte (PB), according to the standard SI definition of the prefix 'peta-'.
How many terabytes (TB) are in a petabyte (PB)?
There are 1,000 terabytes (TB) in 1 petabyte (PB). This follows the SI prefixes where each prefix increases by a factor of 1,000: 1 PB = 1015 bytes and 1 TB = 1012 bytes. Therefore, 1 PB / 1 TB = 1015 / 1012 = 103 = 1,000.
What is the difference between a petabyte (PB) and a pebibyte (PiB)?
- A petabyte (PB) uses the decimal SI prefix 'peta-' and equals 1015 bytes (1,000,000,000,000,000 bytes). It is commonly used in storage marketing and cloud capacity definitions.
- A pebibyte (PiB) uses the binary IEC prefix 'pebi-' and equals 250 bytes (1,125,899,906,842,624 bytes). It is used for precise measurement in technical contexts where powers of 2 are relevant (like OS reporting or memory architecture).
A pebibyte is approximately 12.6% larger than a petabyte (1 PiB ≈ 1.126 PB).
What is the difference between a petabyte (PB) and a petabit (Pb)?
- A petabyte (PB) measures data storage capacity in bytes and equals 1015 bytes.
- A petabit (Pb) measures data quantity or data transfer speed in bits and equals 1015 bits.
Assuming the standard definition of 1 byte = 8 bits, 1 petabyte (PB) is equal to 8 petabits (Pb). Calculation: 1 PB = 1015 bytes = 1015 * 8 bits = 8 * 1015 bits = 8 Pb. Therefore, a petabyte represents 8 times more data storage capacity than the equivalent number of petabits.
Why is PB often used in marketing instead of PiB?
Storage manufacturers typically market drive and system capacities using the decimal prefix petabyte (PB) because 1015 bytes yields a larger, rounder number compared to the equivalent value expressed using the binary prefix pebibyte (PiB) (which is 250 bytes). For instance, a storage system containing exactly 1,000,000,000,000,000 bytes is advertised as 1 PB. If measured in pebibytes, this same physical capacity would be approximately 0.888 PiB (since 1015 / 250 ≈ 0.888). Using PB allows manufacturers to present higher capacity figures, which is advantageous for marketing. This often leads to discrepancies where users see a marketed capacity in PB (or TB, GB) but their operating system reports a lower number when using binary calculations (often labeled GiB/TiB/PiB, or sometimes confusingly still labeled GB/TB/PB).
About Mebibyte (MiB)
How many bytes are in a mebibyte (MiB)?
There are exactly 220 bytes in 1 mebibyte (MiB). This equals 1,048,576 bytes.
How many kibibytes (KiB) are in a mebibyte (MiB)?
There are 1,024 kibibytes (KiB) in 1 mebibyte (MiB). This follows the binary prefix system where 1 MiB = 220 bytes and 1 KiB = 210 bytes, and 220 / 210 = 210 = 1,024.
What is the difference between a mebibyte (MiB) and a megabyte (MB)?
A mebibyte (MiB) represents 220 bytes (1,048,576 bytes), using the IEC binary prefix 'mebi-'. A megabyte (MB) typically represents 106 bytes (1,000,000 bytes), using the SI decimal prefix 'mega-'. A mebibyte is approximately 4.86% larger than a megabyte (1 MiB ≈ 1.0486 MB). Use MiB for precision in binary contexts (like RAM, OS reporting) and MB for decimal contexts (like hard drive marketing, network speeds in some cases) or when the specific definition is clarified.
What is the difference between a mebibyte (MiB) and a mebibit (Mib)?
A mebibyte (MiB) measures information in bytes, while a mebibit (Mib) measures information in bits. Assuming the standard 1 byte = 8 bits, 1 mebibyte (MiB) is equal to 8 mebibits (Mib). Both use the binary prefix 'mebi-' (220).
Why is MiB used less often than MB in marketing?
Marketing materials (like hard drive capacities) often use the decimal prefix (MB, GB) because it results in a larger-looking number for capacity compared to the binary prefix (MiB, GiB) for the same amount of physical storage (e.g., 1,000,000,000 bytes is marketed as 1 GB, while an OS might report it as approximately 931 MiB, not GiB, because 1 GB is closer to 953.67 MiB, but OS often report GiB as GB). This discrepancy arises because 1 MB = 106 bytes, whereas 1 MiB = 220 bytes. Using decimal units allows manufacturers to advertise higher numbers.
Conversion Table: Petabyte to Mebibyte
| Petabyte (PB) | Mebibyte (MiB) |
|---|---|
| 0.5 | 476,837,158.203 |
| 1 | 953,674,316.406 |
| 1.5 | 1,430,511,474.609 |
| 2 | 1,907,348,632.813 |
| 5 | 4,768,371,582.031 |
| 10 | 9,536,743,164.063 |
| 25 | 23,841,857,910.156 |
| 50 | 47,683,715,820.313 |
| 100 | 95,367,431,640.625 |
| 250 | 238,418,579,101.563 |
| 500 | 476,837,158,203.125 |
| 1,000 | 953,674,316,406.25 |
People Also Ask
How do I convert Petabyte to Mebibyte?
To convert Petabyte to Mebibyte, enter the value in Petabyte in the calculator above. The conversion will happen automatically. Use our free online converter for instant and accurate results. You can also visit our data storage converter page to convert between other units in this category.
Learn more →What is the conversion factor from Petabyte to Mebibyte?
The conversion factor depends on the specific relationship between Petabyte and Mebibyte. You can find the exact conversion formula and factor on this page. Our calculator handles all calculations automatically. See the conversion table above for common values.
Can I convert Mebibyte back to Petabyte?
Yes! You can easily convert Mebibyte back to Petabyte by using the swap button (⇌) in the calculator above, or by visiting our Mebibyte to Petabyte converter page. You can also explore other data storage conversions on our category page.
Learn more →What are common uses for Petabyte and Mebibyte?
Petabyte and Mebibyte are both standard units used in data storage measurements. They are commonly used in various applications including engineering, construction, cooking, and scientific research. Browse our data storage converter for more conversion options.
For more data storage conversion questions, visit our FAQ page or explore our conversion guides.
Helpful Conversion Guides
Learn more about unit conversion with our comprehensive guides:
📚 How to Convert Units
Step-by-step guide to unit conversion with practical examples.
🔢 Conversion Formulas
Essential formulas for data storage and other conversions.
⚖️ Metric vs Imperial
Understand the differences between measurement systems.
⚠️ Common Mistakes
Learn about frequent errors and how to avoid them.
All Data Storage Conversions
Other Data Storage Units and Conversions
Explore other data storage units and their conversion options:
- Bit (b) • Petabyte to Bit
- Byte (B) • Petabyte to Byte
- Kilobit (kb) • Petabyte to Kilobit
- Kilobyte (KB) • Petabyte to Kilobyte
- Megabit (Mb) • Petabyte to Megabit
- Megabyte (MB) • Petabyte to Megabyte
- Gigabit (Gb) • Petabyte to Gigabit
- Gigabyte (GB) • Petabyte to Gigabyte
- Terabit (Tb) • Petabyte to Terabit
- Terabyte (TB) • Petabyte to Terabyte
Verified Against Authority Standards
All conversion formulas have been verified against international standards and authoritative sources to ensure maximum accuracy and reliability.
International Electrotechnical Commission — Binary prefixes for digital storage (KiB, MiB, GiB)
International Organization for Standardization — International standards for quantities and units
Last verified: December 3, 2025