Petabyte to Megabyte Conversion Calculator: Free Online Tool
Convert petabytes to megabytes with our free online data storage converter.
Petabyte to Megabyte Calculator
How to Use the Calculator:
- Enter the value you want to convert in the 'From' field (Petabyte).
- The converted value in Megabyte will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Data Storage category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Petabyte to Megabyte
Converting Petabyte to Megabyte involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Petabyte = 1000000000 megabytesExample Calculation:
Convert 10 petabytes: 10 × 1000000000 = 10000000000 megabytes
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
What is a Petabyte and a Megabyte?
A petabyte (PB) is a multiple of the byte unit for digital information storage. The prefix peta- (symbol P) is defined in the International System of Units (SI) as a multiplier of 1015 (1 quadrillion, or 1 followed by 15 zeros). Therefore, 1 petabyte = 1,000,000,000,000,000 bytes. This is equivalent to 1,000 terabytes (TB) or 1,000,000 gigabytes (GB). The petabyte is distinct from the pebibyte (PiB), which uses the binary prefix 'pebi-' established by the International Electrotechnical Commission (IEC) and equals 250 bytes.
A megabyte (MB) is a multiple of the unit byte for digital information. The International System of Units (SI) defines the prefix mega- (M) as 1,000,000 (106). Therefore, one megabyte is exactly 1,000,000 bytes (or 1000 kilobytes).
Similar to the kilobyte, the term "megabyte" has historically been used ambiguously in computing to represent 1,048,576 (220 or 10242) bytes. This binary usage correctly refers to a mebibyte (MiB), a unit defined by the International Electrotechnical Commission (IEC) to eliminate confusion.
Note: The Petabyte is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Megabyte belongs to the imperial/US customary system.
History of the Petabyte and Megabyte
The prefix 'peta-' originates from the Greek word "pente," meaning five (as 1015 = 10005), and was officially adopted as an SI prefix in 1975. In computing and data storage, the term 'petabyte' became necessary as data volumes grew exponentially beyond the terabyte scale in the late 20th and early 21st centuries. Initially, like other SI prefixes (kilo-, mega-, giga-, tera-), 'peta-' was sometimes ambiguously used by some to refer to the nearest power of 2 (250). However, the formal adoption of binary prefixes like 'pebi-' (Pi) by the IEC in 1998 aimed to resolve this confusion, clarifying that petabyte (PB) should strictly refer to 1015 bytes, while pebibyte (PiB) refers to 250 bytes. Despite standardization, the term PB is still sometimes used loosely in casual contexts, but in technical specifications and marketing, PB almost always means 1015 bytes.
The prefix 'mega-' (meaning million) was adopted as an SI prefix in 1960. As computer storage capacities grew beyond kilobytes in the 1970s and 1980s, megabyte became a common unit. However, because computer memory and architecture are often based on powers of two, 1024 * 1024 = 1,048,576 bytes became a convenient measure. This led to the widespread but conflicting use of "megabyte" for both 1,000,000 bytes (decimal) and 1,048,576 bytes (binary).
To address this ambiguity, the IEC introduced the binary prefixes (kibi-, mebi-, gibi-, etc.) in 1998. This standard designated MiB (mebibyte) specifically for 220 bytes and reaffirmed MB (megabyte) strictly for 106 bytes. Despite the standard, the dual usage persists, especially in marketing (using MB for 106) versus operating system reporting (often using MB ambiguously for 220, though sometimes correctly using MiB).
Common Uses for petabytes and megabytes
Explore the typical applications for both Petabyte (imperial/US) and Megabyte (imperial/US) to understand their common contexts.
Common Uses for petabytes
Petabytes are used to quantify extremely large amounts of digital storage and data:
- Capacity of large-scale data centers, cloud storage platforms (e.g., Google Drive, AWS S3, Azure Blob Storage), and enterprise storage systems.
- Big data analytics, involving the processing and storage of vast datasets for scientific research (like genomics, particle physics, astronomy), business intelligence, and machine learning model training.
- National digital archives, large media libraries, and corporate data repositories storing historical records, high-resolution multimedia content, or extensive backups.
- High-performance computing (HPC) environments managing massive simulation outputs or experimental data collections.
- Large-scale video surveillance systems storing continuous high-resolution footage from numerous cameras.
- Quantifying the total amount of data generated globally or traversing major internet backbones over periods.
Common Uses for megabytes
The megabyte (MB), representing 1,000,000 bytes, is commonly used for:
- Measuring the size of medium-sized files (e.g., high-resolution images, MP3 audio files, short video clips, documents with embedded images).
- Quantifying the capacity of older storage media like floppy disks and CDs.
- Specifying the size of software downloads or application components.
- Used by storage device manufacturers (hard drives, SSDs, USB drives) to define capacity based on the decimal system (106 bytes).
- Measuring data transfer rates in megabytes per second (MB/s or MBps).
The informal use representing 1,048,576 bytes (correctly MiB) appeared frequently in:
- Quantifying computer RAM capacity (though MiB is the precise term).
- Reporting file sizes or disk space by many operating systems and software, leading to discrepancies with advertised storage capacities.
Frequently Asked Questions
Questions About Petabyte (PB)
How many bytes are in a petabyte (PB)?
There are exactly 1,000,000,000,000,000 bytes (one quadrillion bytes, or 1015 bytes) in 1 petabyte (PB), according to the standard SI definition of the prefix 'peta-'.
How many terabytes (TB) are in a petabyte (PB)?
There are 1,000 terabytes (TB) in 1 petabyte (PB). This follows the SI prefixes where each prefix increases by a factor of 1,000: 1 PB = 1015 bytes and 1 TB = 1012 bytes. Therefore, 1 PB / 1 TB = 1015 / 1012 = 103 = 1,000.
What is the difference between a petabyte (PB) and a pebibyte (PiB)?
- A petabyte (PB) uses the decimal SI prefix 'peta-' and equals 1015 bytes (1,000,000,000,000,000 bytes). It is commonly used in storage marketing and cloud capacity definitions.
- A pebibyte (PiB) uses the binary IEC prefix 'pebi-' and equals 250 bytes (1,125,899,906,842,624 bytes). It is used for precise measurement in technical contexts where powers of 2 are relevant (like OS reporting or memory architecture).
A pebibyte is approximately 12.6% larger than a petabyte (1 PiB ≈ 1.126 PB).
What is the difference between a petabyte (PB) and a petabit (Pb)?
- A petabyte (PB) measures data storage capacity in bytes and equals 1015 bytes.
- A petabit (Pb) measures data quantity or data transfer speed in bits and equals 1015 bits.
Assuming the standard definition of 1 byte = 8 bits, 1 petabyte (PB) is equal to 8 petabits (Pb). Calculation: 1 PB = 1015 bytes = 1015 * 8 bits = 8 * 1015 bits = 8 Pb. Therefore, a petabyte represents 8 times more data storage capacity than the equivalent number of petabits.
Why is PB often used in marketing instead of PiB?
Storage manufacturers typically market drive and system capacities using the decimal prefix petabyte (PB) because 1015 bytes yields a larger, rounder number compared to the equivalent value expressed using the binary prefix pebibyte (PiB) (which is 250 bytes). For instance, a storage system containing exactly 1,000,000,000,000,000 bytes is advertised as 1 PB. If measured in pebibytes, this same physical capacity would be approximately 0.888 PiB (since 1015 / 250 ≈ 0.888). Using PB allows manufacturers to present higher capacity figures, which is advantageous for marketing. This often leads to discrepancies where users see a marketed capacity in PB (or TB, GB) but their operating system reports a lower number when using binary calculations (often labeled GiB/TiB/PiB, or sometimes confusingly still labeled GB/TB/PB).
About Megabyte (MB)
How many bytes are in a megabyte (MB)?
According to the official SI standard, 1 megabyte (MB) = 1,000,000 bytes (106 bytes). However, in some computing contexts, particularly older ones or relating to RAM, "megabyte" was informally used to mean 1,048,576 bytes (220 bytes). The correct term for 1,048,576 bytes is 1 mebibyte (MiB). Context is key if the specific symbol (MB vs. MiB) isn't used.
How many kilobytes (KB) are in a megabyte (MB)?
Based on the SI standard, 1 megabyte (MB) = 1000 kilobytes (KB) (since 1 MB = 1,000,000 bytes and 1 KB = 1000 bytes). If using the binary interpretation (which should correctly use MiB and KiB), then 1 mebibyte (MiB) = 1024 kibibytes (KiB) (since 1 MiB = 1,048,576 bytes and 1 KiB = 1024 bytes).
What is the difference between a megabyte (MB) and a mebibyte (MiB)?
- MB (megabyte): Based on the decimal prefix 'mega-', meaning 1,000,000 bytes (106 bytes). This is the SI standard.
- MiB (mebibyte): Based on the binary prefix 'mebi-', meaning 1,048,576 bytes (220 bytes). This is the IEC standard for binary multiples.
A mebibyte (MiB) is approximately 4.86% larger than a megabyte (MB) (1 MiB ≈ 1.0486 MB). Using MiB when referring to 1,048,576 bytes avoids ambiguity, especially in contexts like RAM measurement or OS file size reporting.
What is the difference between a megabyte (MB) and a megabit (Mb)?
- A megabyte (MB) measures data storage in bytes. 1 MB = 1,000,000 bytes (SI standard).
- A megabit (Mb) measures data storage or transfer speed in bits. 1 Mb = 1,000,000 bits (SI standard).
Since 1 byte = 8 bits, 1 megabyte (MB) is equal to 8 megabits (Mb). File sizes are typically measured in MB, while internet speeds are often measured in Mbps (megabits per second).
Conversion Table: Petabyte to Megabyte
| Petabyte (PB) | Megabyte (MB) |
|---|---|
| 1 | 1,000,000,000 |
| 5 | 5,000,000,000 |
| 10 | 10,000,000,000 |
| 25 | 25,000,000,000 |
| 50 | 50,000,000,000 |
| 100 | 100,000,000,000 |
| 500 | 500,000,000,000 |
| 1,000 | 1,000,000,000,000 |