Tebibit to Mebibit Conversion Calculator: Free Online Tool
Convert tebibits to mebibits with our free online data storage converter.
Tebibit to Mebibit Calculator
How to Use the Calculator:
- Enter the value you want to convert in the 'From' field (Tebibit).
- The converted value in Mebibit will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Data Storage category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Tebibit to Mebibit
Converting Tebibit to Mebibit involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Tebibit = 1048576 mebibitsExample Calculation:
Convert 10 tebibits: 10 × 1048576 = 10485760 mebibits
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
What is a Tebibit and a Mebibit?
A tebibit (Tib) is a unit of digital information equal to 240 bits, which is exactly 1,099,511,627,776 bits. It uses the binary prefix 'tebi-' established by the International Electrotechnical Commission (IEC). The tebibit is closely related to the terabit (Tb), which is defined using the decimal prefix 'tera-' (1012 or 1,000,000,000,000 bits).
A mebibit (Mib) is a unit of digital information equal to 220 bits, which is exactly 1,048,576 bits. It uses the binary prefix 'mebi-' established by the International Electrotechnical Commission (IEC). The mebibit is closely related to the megabit (Mb), which is defined using the decimal prefix 'mega-' (106 or 1,000,000 bits).
Note: The Tebibit is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Mebibit belongs to the imperial/US customary system.
History of the Tebibit and Mebibit
The prefix 'tebi-' (representing 240) was defined by the IEC in 1998 along with other binary prefixes (kibi-, mebi-, gibi-, pebi-, etc.). This standardization aimed to eliminate the confusion caused by using SI prefixes (like kilo-, mega-, giga-, tera-) to denote both powers of 1000 (decimal) and powers of 1024 (binary) in computing contexts, which became particularly problematic for larger quantities like terabytes vs. tebibytes. The term 'tebibit' specifically refers to the 240 multiple of bits.
The prefix 'mebi-' (representing 220) was defined by the IEC in 1998 along with other binary prefixes (kibi-, gibi-, tebi-, etc.). This standardization aimed to eliminate the confusion caused by using SI prefixes (like kilo-, mega-, giga-) to denote both powers of 1000 (decimal) and powers of 1024 (binary) in computing contexts. The term 'mebibit' specifically refers to the 220 multiple of bits.
Common Uses for tebibits and mebibits
Explore the typical applications for both Tebibit (imperial/US) and Mebibit (imperial/US) to understand their common contexts.
Common Uses for tebibits
Tebibits are used in contexts dealing with large amounts of data where binary precision is important:
- Specifying the capacity of large memory modules (RAM), solid-state drives (SSDs), or storage systems in technical documentation where sizes are based on powers of 2 at the bit level.
- Calculations in computer architecture, data storage design, and network engineering involving large binary data structures.
- Theoretical calculations in computer science, information theory, and high-speed data transmission analysis.
- Ensuring accuracy when comparing binary (Tib) and decimal (Tb) data quantities, especially in storage capacity planning or analyzing network throughput versus actual data stored. While terabits (Tb) are common for network speeds (Tbps), tebibits provide precision for binary-based storage or memory calculations.
Common Uses for mebibits
While less common in everyday usage than the megabit (Mb) – often used for network speeds (Mbps) – the mebibit is important where binary precision for bit quantities is required:
- Specifying memory chip capacities or data bus widths in technical documentation where sizes are based on powers of 2.
- Internal calculations within data communication protocols, hardware design, or software that operate on binary multiples.
- Theoretical calculations in computer science, information theory, and data transmission analysis.
- Ensuring accuracy when comparing binary (Mib) and decimal (Mb) data quantities, especially in storage and memory contexts.
Frequently Asked Questions
Questions About Tebibit (Tib)
How many bits are in a tebibit?
There are exactly 240 bits in 1 tebibit (Tib). This equals 1,099,511,627,776 bits.
How many gibibits (Gib) are in a tebibit (Tib)?
There are 1,024 gibibits (Gib) in 1 tebibit (Tib). This is because 1 Tib = 240 bits and 1 Gib = 230 bits, and 240 / 230 = 210 = 1,024.
What is the difference between a tebibit (Tib) and a terabit (Tb)?
- A tebibit (Tib) represents 240 bits (1,099,511,627,776 bits), using the binary prefix 'tebi-'.
- A terabit (Tb) represents 1012 bits (1,000,000,000,000 bits), using the decimal prefix 'tera-'. A tebibit is approximately 9.95% larger than a terabit (1 Tib ≈ 1.0995 Tb).
What is the difference between a tebibit (Tib) and a tebibyte (TiB)?
A tebibit (Tib) measures information in bits, while a tebibyte (TiB) measures information in bytes. Assuming the standard 1 byte = 8 bits, 1 tebibyte (TiB) is equal to 8 tebibits (Tib). Both use the binary prefix 'tebi-' (240).
About Mebibit (Mib)
How many bits are in a mebibit?
There are exactly 220 bits in 1 mebibit (Mib). This equals 1,048,576 bits.
How many kibibits (Kib) are in a mebibit (Mib)?
There are 1,024 kibibits (Kib) in 1 mebibit (Mib). This is because 1 Mib = 220 bits and 1 Kib = 210 bits, and 220 / 210 = 210 = 1,024.
What is the difference between a mebibit (Mib) and a megabit (Mb)?
A mebibit (Mib) represents 220 bits (1,048,576 bits), using the binary prefix 'mebi-'. A megabit (Mb) represents 106 bits (1,000,000 bits), using the decimal prefix 'mega-'. A mebibit is approximately 4.86% larger than a megabit (1 Mib ≈ 1.0486 Mb).
What is the difference between a mebibit (Mib) and a mebibyte (MiB)?
A mebibit (Mib) measures information in bits, while a mebibyte (MiB) measures information in bytes. Assuming the standard 1 byte = 8 bits, 1 mebibyte (MiB) is equal to 8 mebibits (Mib). Both use the binary prefix 'mebi-' (220).
Conversion Table: Tebibit to Mebibit
| Tebibit (Tib) | Mebibit (Mib) |
|---|---|
| 1 | 1,048,576 |
| 5 | 5,242,880 |
| 10 | 10,485,760 |
| 25 | 26,214,400 |
| 50 | 52,428,800 |
| 100 | 104,857,600 |
| 500 | 524,288,000 |
| 1,000 | 1,048,576,000 |