Terabyte to Megabit Converter
Convert terabytes to megabits with our free online data storage converter.
Quick Answer
1 Terabyte = 8000000 megabits
Formula: Terabyte × conversion factor = Megabit
Use the calculator below for instant, accurate conversions.
Our Accuracy Guarantee
All conversion formulas on UnitsConverter.io have been verified against NIST (National Institute of Standards and Technology) guidelines and international SI standards. Our calculations are accurate to 10 decimal places for standard conversions and use arbitrary precision arithmetic for astronomical units.
Terabyte to Megabit Calculator
How to Use the Terabyte to Megabit Calculator:
- Enter the value you want to convert in the 'From' field (Terabyte).
- The converted value in Megabit will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Data Storage category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Terabyte to Megabit: Step-by-Step Guide
Converting Terabyte to Megabit involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Terabyte = 8000000 megabitsExample Calculation:
Convert 10 terabytes: 10 × 8000000 = 80000000 megabits
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
Need to convert to other data storage units?
View all Data Storage conversions →What is a Terabyte and a Megabit?
A terabyte (TB) is a multiple of the byte unit for digital information storage. The prefix tera- (symbol T) is defined in the International System of Units (SI) as a multiplier of 1012 (1 trillion, or 1 followed by 12 zeros). Therefore, 1 terabyte = 1,000,000,000,000 bytes. This is equivalent to 1,000 gigabytes (GB).
A megabit (Mb or Mbit) is a multiple of the bit unit for digital information or computer storage. The prefix mega- (symbol M) is defined in the International System of Units (SI) as a multiplier of 106 (1 million). Therefore, 1 megabit = 1,000,000 bits (or 1000 kilobits).
Note: The Terabyte is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Megabit belongs to the imperial/US customary system.
History of the Terabyte and Megabit
The SI prefix 'tera-' (meaning 1012) was adopted for use in computing as storage capacities reached trillions of bytes. Historically, the term 'terabyte' was often used ambiguously to refer to either 1012 bytes (the strict SI definition) or 240 bytes (1,099,511,627,776 bytes), which is the power of 2 closest to a trillion. This ambiguity, particularly noticeable in how operating systems reported disk sizes versus how manufacturers advertised them, led the International Electrotechnical Commission (IEC) to introduce the distinct binary prefix 'tebi-' (Ti) for 240. Thus, tebibyte (TiB) specifically denotes 240 bytes, while terabyte (TB) formally refers to 1012 bytes.
As data transfer speeds increased beyond the kilobit range, the megabit became a common unit, particularly in networking and telecommunications. Like the kilobit, it generally adheres to the SI standard (106 bits) rather than the binary interpretation sometimes used for bytes (which would be 220 bits, correctly termed a mebibit). The introduction of binary prefixes like 'mebi-' aimed to resolve this potential ambiguity.
Common Uses and Applications: terabytes vs megabits
Explore the typical applications for both Terabyte (imperial/US) and Megabit (imperial/US) to understand their common contexts.
Common Uses for terabytes
Terabytes are widely used to measure large amounts of digital data storage capacity:
- Specifying the capacity of consumer and enterprise hard disk drives (HDDs) and solid-state drives (SSDs).
- Measuring the size of large files, databases, archives, and backups.
- Quantifying the storage space available in cloud storage plans and data centers.
- Describing the amount of data transferred over networks or used in monthly internet data caps.
- Indicating the capacity of personal computers, laptops, external drives, and network-attached storage (NAS) devices.
When to Use megabits
- Measuring data transfer rates (e.g., internet connection speeds in Mbps - megabits per second).
- Quantifying network bandwidth.
- Specifying the capacity of older storage media or certain types of memory chips.
- Video and audio bitrates (e.g., streaming quality often measured in Mbps).
Additional Unit Information
About Terabyte (TB)
How many bytes are in a terabyte (TB)?
According to the standard SI definition, there are exactly 1,000,000,000,000 bytes (one trillion bytes, or 1012 bytes) in 1 terabyte (TB).
How many gigabytes (GB) are in a terabyte (TB)?
There are 1,000 gigabytes (GB) in 1 terabyte (TB). This follows the SI prefixes: 1 TB = 1012 bytes and 1 GB = 109 bytes. Therefore, 1 TB / 1 GB = 1012 / 109 = 103 = 1,000.
What is the difference between a terabyte (TB) and a tebibyte (TiB)?
- A terabyte (TB) uses the decimal SI prefix 'tera-' and equals 1012 bytes (1,000,000,000,000 bytes). It's commonly used in storage device marketing.
- A tebibyte (TiB) uses the binary IEC prefix 'tebi-' and equals 240 bytes (1,099,511,627,776 bytes). It's often used by operating systems to report storage capacity based on powers of 2. A tebibyte (TiB) is approximately 9.95% larger than a terabyte (TB) (1 TiB ≈ 1.0995 TB).
What is the difference between a terabyte (TB) and a terabit (Tb)?
- A terabyte (TB) measures data storage capacity in bytes and equals 1012 bytes.
- A terabit (Tb) measures data quantity or data transfer speed in bits and equals 1012 bits. Assuming the standard definition of 1 byte = 8 bits, 1 terabyte (TB) is equal to 8 terabits (Tb). Calculation: 1 TB = 1012 bytes = 1012 * 8 bits = 8 * 1012 bits = 8 Tb. Therefore, a terabyte represents 8 times more data storage capacity than the equivalent number of terabits.
Why is TB often used in marketing instead of TiB?
Storage manufacturers typically market drive capacities using the decimal prefix terabyte (TB) because 1012 bytes yields a larger, rounder number compared to the equivalent value expressed using the binary prefix tebibyte (TiB) (which is 240 bytes). For instance, a hard drive containing exactly 1,000,000,000,000 bytes is advertised as 1 TB. If measured in tebibytes, this same physical capacity would be approximately 0.909 TiB (since 1012 / 240 ≈ 0.909). Using TB allows manufacturers to present higher capacity figures, which is advantageous for marketing, even though operating systems might report the capacity using the smaller TiB value.
About Megabit (Mb)
How many bits are in a megabit?
There are exactly 1,000,000 bits (or 106 bits) in 1 megabit (Mb), based on the standard SI definition of the prefix 'mega-'.
What is the difference between a megabit (Mb) and a megabyte (MB)?
- A megabit (Mb) measures bits and equals 1,000,000 bits. It's often used for data transfer rates.
- A megabyte (MB) measures bytes. According to SI standards, it equals 1,000,000 bytes. (Note: Historically, MB was sometimes used informally for 1,048,576 bytes, which is correctly termed a mebibyte (MiB)).
Since 1 byte = 8 bits, 1 megabyte (1,000,000 bytes) is equal to 8,000,000 bits. Therefore, a megabyte represents 8 times more data than a megabit.
What is the difference between a megabit (Mb) and a mebibit (Mib)?
- A megabit (Mb) uses the decimal SI prefix 'mega-' and equals 106 bits (1,000,000 bits).
- A mebibit (Mib) uses the binary IEC prefix 'mebi-' and equals 220 bits (1,048,576 bits).
A mebibit is approximately 4.86% larger than a megabit (1 Mib ≈ 1.0486 Mb). Using Mib provides clarity when specifically referring to 1,048,576 bits.
If my internet speed is 100 Mbps, how fast is that in MBps?
To convert Mbps (megabits per second) to MBps (megabytes per second), you divide by 8 (since 1 byte = 8 bits). So, 100 Mbps / 8 = 12.5 MBps. This means you can theoretically download 12.5 megabytes of data per second.
Conversion Table: Terabyte to Megabit
| Terabyte (TB) | Megabit (Mb) |
|---|---|
| 0.5 | 4,000,000 |
| 1 | 8,000,000 |
| 1.5 | 12,000,000 |
| 2 | 16,000,000 |
| 5 | 40,000,000 |
| 10 | 80,000,000 |
| 25 | 200,000,000 |
| 50 | 400,000,000 |
| 100 | 800,000,000 |
| 250 | 2,000,000,000 |
| 500 | 4,000,000,000 |
| 1,000 | 8,000,000,000 |
People Also Ask
How do I convert Terabyte to Megabit?
To convert Terabyte to Megabit, enter the value in Terabyte in the calculator above. The conversion will happen automatically. Use our free online converter for instant and accurate results. You can also visit our data storage converter page to convert between other units in this category.
Learn more →What is the conversion factor from Terabyte to Megabit?
The conversion factor depends on the specific relationship between Terabyte and Megabit. You can find the exact conversion formula and factor on this page. Our calculator handles all calculations automatically. See the conversion table above for common values.
Can I convert Megabit back to Terabyte?
Yes! You can easily convert Megabit back to Terabyte by using the swap button (⇌) in the calculator above, or by visiting our Megabit to Terabyte converter page. You can also explore other data storage conversions on our category page.
Learn more →What are common uses for Terabyte and Megabit?
Terabyte and Megabit are both standard units used in data storage measurements. They are commonly used in various applications including engineering, construction, cooking, and scientific research. Browse our data storage converter for more conversion options.
For more data storage conversion questions, visit our FAQ page or explore our conversion guides.
Helpful Conversion Guides
Learn more about unit conversion with our comprehensive guides:
📚 How to Convert Units
Step-by-step guide to unit conversion with practical examples.
🔢 Conversion Formulas
Essential formulas for data storage and other conversions.
⚖️ Metric vs Imperial
Understand the differences between measurement systems.
⚠️ Common Mistakes
Learn about frequent errors and how to avoid them.
All Data Storage Conversions
Other Data Storage Units and Conversions
Explore other data storage units and their conversion options:
- Bit (b) • Terabyte to Bit
- Byte (B) • Terabyte to Byte
- Kilobit (kb) • Terabyte to Kilobit
- Kilobyte (KB) • Terabyte to Kilobyte
- Megabyte (MB) • Terabyte to Megabyte
- Gigabit (Gb) • Terabyte to Gigabit
- Gigabyte (GB) • Terabyte to Gigabyte
- Terabit (Tb) • Terabyte to Terabit
- Petabit (Pb) • Terabyte to Petabit
- Petabyte (PB) • Terabyte to Petabyte
Verified Against Authority Standards
All conversion formulas have been verified against international standards and authoritative sources to ensure maximum accuracy and reliability.
International Electrotechnical Commission — Binary prefixes for digital storage (KiB, MiB, GiB)
International Organization for Standardization — International standards for quantities and units
Last verified: December 3, 2025