Terabyte to Petabyte Converter
Convert terabytes to petabytes with our free online data storage converter.
Quick Answer
1 Terabyte = 0.001 petabytes
Formula: Terabyte × conversion factor = Petabyte
Use the calculator below for instant, accurate conversions.
Our Accuracy Guarantee
All conversion formulas on UnitsConverter.io have been verified against NIST (National Institute of Standards and Technology) guidelines and international SI standards. Our calculations are accurate to 10 decimal places for standard conversions and use arbitrary precision arithmetic for astronomical units.
Terabyte to Petabyte Calculator
How to Use the Terabyte to Petabyte Calculator:
- Enter the value you want to convert in the 'From' field (Terabyte).
- The converted value in Petabyte will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Data Storage category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Terabyte to Petabyte: Step-by-Step Guide
Converting Terabyte to Petabyte involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Terabyte = 0.001 petabytesExample Calculation:
Convert 10 terabytes: 10 × 0.001 = 0.01 petabytes
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
Need to convert to other data storage units?
View all Data Storage conversions →What is a Terabyte and a Petabyte?
A terabyte (TB) is a multiple of the byte unit for digital information storage. The prefix tera- (symbol T) is defined in the International System of Units (SI) as a multiplier of 1012 (1 trillion, or 1 followed by 12 zeros). Therefore, 1 terabyte = 1,000,000,000,000 bytes. This is equivalent to 1,000 gigabytes (GB).
A petabyte (PB) is a multiple of the byte unit for digital information storage. The prefix peta- (symbol P) is defined in the International System of Units (SI) as a multiplier of 1015 (1 quadrillion, or 1 followed by 15 zeros). Therefore, 1 petabyte = 1,000,000,000,000,000 bytes. This is equivalent to 1,000 terabytes (TB) or 1,000,000 gigabytes (GB). The petabyte is distinct from the pebibyte (PiB), which uses the binary prefix 'pebi-' established by the International Electrotechnical Commission (IEC) and equals 250 bytes.
Note: The Terabyte is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Petabyte belongs to the imperial/US customary system.
History of the Terabyte and Petabyte
The SI prefix 'tera-' (meaning 1012) was adopted for use in computing as storage capacities reached trillions of bytes. Historically, the term 'terabyte' was often used ambiguously to refer to either 1012 bytes (the strict SI definition) or 240 bytes (1,099,511,627,776 bytes), which is the power of 2 closest to a trillion. This ambiguity, particularly noticeable in how operating systems reported disk sizes versus how manufacturers advertised them, led the International Electrotechnical Commission (IEC) to introduce the distinct binary prefix 'tebi-' (Ti) for 240. Thus, tebibyte (TiB) specifically denotes 240 bytes, while terabyte (TB) formally refers to 1012 bytes.
The prefix 'peta-' originates from the Greek word "pente," meaning five (as 1015 = 10005), and was officially adopted as an SI prefix in 1975. In computing and data storage, the term 'petabyte' became necessary as data volumes grew exponentially beyond the terabyte scale in the late 20th and early 21st centuries. Initially, like other SI prefixes (kilo-, mega-, giga-, tera-), 'peta-' was sometimes ambiguously used by some to refer to the nearest power of 2 (250). However, the formal adoption of binary prefixes like 'pebi-' (Pi) by the IEC in 1998 aimed to resolve this confusion, clarifying that petabyte (PB) should strictly refer to 1015 bytes, while pebibyte (PiB) refers to 250 bytes. Despite standardization, the term PB is still sometimes used loosely in casual contexts, but in technical specifications and marketing, PB almost always means 1015 bytes.
Common Uses and Applications: terabytes vs petabytes
Explore the typical applications for both Terabyte (imperial/US) and Petabyte (imperial/US) to understand their common contexts.
Common Uses for terabytes
Terabytes are widely used to measure large amounts of digital data storage capacity:
- Specifying the capacity of consumer and enterprise hard disk drives (HDDs) and solid-state drives (SSDs).
- Measuring the size of large files, databases, archives, and backups.
- Quantifying the storage space available in cloud storage plans and data centers.
- Describing the amount of data transferred over networks or used in monthly internet data caps.
- Indicating the capacity of personal computers, laptops, external drives, and network-attached storage (NAS) devices.
When to Use petabytes
Petabytes are used to quantify extremely large amounts of digital storage and data:
- Capacity of large-scale data centers, cloud storage platforms (e.g., Google Drive, AWS S3, Azure Blob Storage), and enterprise storage systems.
- Big data analytics, involving the processing and storage of vast datasets for scientific research (like genomics, particle physics, astronomy), business intelligence, and machine learning model training.
- National digital archives, large media libraries, and corporate data repositories storing historical records, high-resolution multimedia content, or extensive backups.
- High-performance computing (HPC) environments managing massive simulation outputs or experimental data collections.
- Large-scale video surveillance systems storing continuous high-resolution footage from numerous cameras.
- Quantifying the total amount of data generated globally or traversing major internet backbones over periods.
Additional Unit Information
About Terabyte (TB)
How many bytes are in a terabyte (TB)?
According to the standard SI definition, there are exactly 1,000,000,000,000 bytes (one trillion bytes, or 1012 bytes) in 1 terabyte (TB).
How many gigabytes (GB) are in a terabyte (TB)?
There are 1,000 gigabytes (GB) in 1 terabyte (TB). This follows the SI prefixes: 1 TB = 1012 bytes and 1 GB = 109 bytes. Therefore, 1 TB / 1 GB = 1012 / 109 = 103 = 1,000.
What is the difference between a terabyte (TB) and a tebibyte (TiB)?
- A terabyte (TB) uses the decimal SI prefix 'tera-' and equals 1012 bytes (1,000,000,000,000 bytes). It's commonly used in storage device marketing.
- A tebibyte (TiB) uses the binary IEC prefix 'tebi-' and equals 240 bytes (1,099,511,627,776 bytes). It's often used by operating systems to report storage capacity based on powers of 2. A tebibyte (TiB) is approximately 9.95% larger than a terabyte (TB) (1 TiB ≈ 1.0995 TB).
What is the difference between a terabyte (TB) and a terabit (Tb)?
- A terabyte (TB) measures data storage capacity in bytes and equals 1012 bytes.
- A terabit (Tb) measures data quantity or data transfer speed in bits and equals 1012 bits. Assuming the standard definition of 1 byte = 8 bits, 1 terabyte (TB) is equal to 8 terabits (Tb). Calculation: 1 TB = 1012 bytes = 1012 * 8 bits = 8 * 1012 bits = 8 Tb. Therefore, a terabyte represents 8 times more data storage capacity than the equivalent number of terabits.
Why is TB often used in marketing instead of TiB?
Storage manufacturers typically market drive capacities using the decimal prefix terabyte (TB) because 1012 bytes yields a larger, rounder number compared to the equivalent value expressed using the binary prefix tebibyte (TiB) (which is 240 bytes). For instance, a hard drive containing exactly 1,000,000,000,000 bytes is advertised as 1 TB. If measured in tebibytes, this same physical capacity would be approximately 0.909 TiB (since 1012 / 240 ≈ 0.909). Using TB allows manufacturers to present higher capacity figures, which is advantageous for marketing, even though operating systems might report the capacity using the smaller TiB value.
About Petabyte (PB)
How many bytes are in a petabyte (PB)?
There are exactly 1,000,000,000,000,000 bytes (one quadrillion bytes, or 1015 bytes) in 1 petabyte (PB), according to the standard SI definition of the prefix 'peta-'.
How many terabytes (TB) are in a petabyte (PB)?
There are 1,000 terabytes (TB) in 1 petabyte (PB). This follows the SI prefixes where each prefix increases by a factor of 1,000: 1 PB = 1015 bytes and 1 TB = 1012 bytes. Therefore, 1 PB / 1 TB = 1015 / 1012 = 103 = 1,000.
What is the difference between a petabyte (PB) and a pebibyte (PiB)?
- A petabyte (PB) uses the decimal SI prefix 'peta-' and equals 1015 bytes (1,000,000,000,000,000 bytes). It is commonly used in storage marketing and cloud capacity definitions.
- A pebibyte (PiB) uses the binary IEC prefix 'pebi-' and equals 250 bytes (1,125,899,906,842,624 bytes). It is used for precise measurement in technical contexts where powers of 2 are relevant (like OS reporting or memory architecture).
A pebibyte is approximately 12.6% larger than a petabyte (1 PiB ≈ 1.126 PB).
What is the difference between a petabyte (PB) and a petabit (Pb)?
- A petabyte (PB) measures data storage capacity in bytes and equals 1015 bytes.
- A petabit (Pb) measures data quantity or data transfer speed in bits and equals 1015 bits.
Assuming the standard definition of 1 byte = 8 bits, 1 petabyte (PB) is equal to 8 petabits (Pb). Calculation: 1 PB = 1015 bytes = 1015 * 8 bits = 8 * 1015 bits = 8 Pb. Therefore, a petabyte represents 8 times more data storage capacity than the equivalent number of petabits.
Why is PB often used in marketing instead of PiB?
Storage manufacturers typically market drive and system capacities using the decimal prefix petabyte (PB) because 1015 bytes yields a larger, rounder number compared to the equivalent value expressed using the binary prefix pebibyte (PiB) (which is 250 bytes). For instance, a storage system containing exactly 1,000,000,000,000,000 bytes is advertised as 1 PB. If measured in pebibytes, this same physical capacity would be approximately 0.888 PiB (since 1015 / 250 ≈ 0.888). Using PB allows manufacturers to present higher capacity figures, which is advantageous for marketing. This often leads to discrepancies where users see a marketed capacity in PB (or TB, GB) but their operating system reports a lower number when using binary calculations (often labeled GiB/TiB/PiB, or sometimes confusingly still labeled GB/TB/PB).
Conversion Table: Terabyte to Petabyte
| Terabyte (TB) | Petabyte (PB) |
|---|---|
| 0.5 | 0.001 |
| 1 | 0.001 |
| 1.5 | 0.002 |
| 2 | 0.002 |
| 5 | 0.005 |
| 10 | 0.01 |
| 25 | 0.025 |
| 50 | 0.05 |
| 100 | 0.1 |
| 250 | 0.25 |
| 500 | 0.5 |
| 1,000 | 1 |
People Also Ask
How do I convert Terabyte to Petabyte?
To convert Terabyte to Petabyte, enter the value in Terabyte in the calculator above. The conversion will happen automatically. Use our free online converter for instant and accurate results. You can also visit our data storage converter page to convert between other units in this category.
Learn more →What is the conversion factor from Terabyte to Petabyte?
The conversion factor depends on the specific relationship between Terabyte and Petabyte. You can find the exact conversion formula and factor on this page. Our calculator handles all calculations automatically. See the conversion table above for common values.
Can I convert Petabyte back to Terabyte?
Yes! You can easily convert Petabyte back to Terabyte by using the swap button (⇌) in the calculator above, or by visiting our Petabyte to Terabyte converter page. You can also explore other data storage conversions on our category page.
Learn more →What are common uses for Terabyte and Petabyte?
Terabyte and Petabyte are both standard units used in data storage measurements. They are commonly used in various applications including engineering, construction, cooking, and scientific research. Browse our data storage converter for more conversion options.
For more data storage conversion questions, visit our FAQ page or explore our conversion guides.
Helpful Conversion Guides
Learn more about unit conversion with our comprehensive guides:
📚 How to Convert Units
Step-by-step guide to unit conversion with practical examples.
🔢 Conversion Formulas
Essential formulas for data storage and other conversions.
⚖️ Metric vs Imperial
Understand the differences between measurement systems.
⚠️ Common Mistakes
Learn about frequent errors and how to avoid them.
All Data Storage Conversions
Other Data Storage Units and Conversions
Explore other data storage units and their conversion options:
- Bit (b) • Terabyte to Bit
- Byte (B) • Terabyte to Byte
- Kilobit (kb) • Terabyte to Kilobit
- Kilobyte (KB) • Terabyte to Kilobyte
- Megabit (Mb) • Terabyte to Megabit
- Megabyte (MB) • Terabyte to Megabyte
- Gigabit (Gb) • Terabyte to Gigabit
- Gigabyte (GB) • Terabyte to Gigabyte
- Terabit (Tb) • Terabyte to Terabit
- Petabit (Pb) • Terabyte to Petabit
Verified Against Authority Standards
All conversion formulas have been verified against international standards and authoritative sources to ensure maximum accuracy and reliability.
International Electrotechnical Commission — Binary prefixes for digital storage (KiB, MiB, GiB)
International Organization for Standardization — International standards for quantities and units
Last verified: December 3, 2025