Aln to Point (Typography) Conversion Calculator: Free Online Tool

The Aln (Swedish), Alen (Danish and Norwegian) was a traditional Scandinavian unit of length, analogous to the English ell or cubit. Its length varied significantly by region and time but was generally based on the length of the forearm.

Key standardized or common values include:

• Swedish Aln: Officially standardized (as the Rydaholmsaln) in 1665 and confirmed in 1735 as exactly 2 Swedish fot (feet). This equates to approximately 0.5938 meters (or 59.38 cm / 23.38 inches).
• Danish Alen: The common standard (Sjællandsk alen) was 2 Danish fod (feet), equating to approximately 0.6277 meters (or 62.77 cm / 24.71 inches).
• Norwegian Alen: Often followed the Danish standard due to political union. After 1824, it was legally defined as 2 Norwegian fot, equating to 0.6275 meters (or 62.75 cm / 24.70 inches), very close to the Danish value.

The Aln/Alen was typically subdivided into 4 kvarter (quarters).

The Aln/Alen originates from the Proto-Germanic word for forearm (alinō), reflecting its basis as an anthropomorphic unit, similar to the cubit in other cultures. For centuries, its length was inconsistent, varying between regions, cities, and trades within Sweden, Denmark, and Norway.

• Early Variations: Numerous local standards existed, often based on physical rods kept by authorities or guilds.
• Standardization Efforts:
  • Sweden: Attempts at standardization culminated in the adoption of the Rydaholmsaln (based on a specific iron standard bar from Rydaholm church) in 1665, defined as 2 fot. This standard (≈0.5938 m) became mandatory nationwide in 1735.
  • Denmark & Norway: The Sjællandsk alen (Zealand ell, ≈0.6277 m) became the dominant standard in Denmark and, consequently, in Norway during their union. Norway later formally adopted a slightly different value (≈0.6275 m) based on its own fot definition in 1824.
• Metrication: The Aln/Alen was officially replaced by the metric system during the 19th and early 20th centuries: Norway in 1875, Sweden in 1889, and Denmark in 1907.

Historically, the Aln/Alen was a fundamental unit for everyday trade and craft:

• Textiles: Its most prominent use was measuring cloth (wool, linen, silk). Standardization was often driven by the textile trade.
• Timber and Lumber: Measuring lengths of wood.
• Rope and Cordage: Measuring lengths of rope.
• Construction: Used in building measurements, though perhaps less formally than in trade.
• General Trade: Measuring various goods sold by length.

It was less commonly used for land surveying, where units like the stång (rod) or mil (mile) were preferred.