Cable Length to Digit Conversion Calculator: Free Online Tool
Convert cable lengths to digits with our free online length converter.
Cable Length to Digit Calculator
How to Use the Calculator:
- Enter the value you want to convert in the 'From' field (Cable Length).
- The converted value in Digit will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Cable Length to Digit
Converting Cable Length to Digit involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Cable Length = 9721.785 digitsExample Calculation:
Convert 10 cable lengths: 10 × 9721.785 = 9.7218e+4 digits
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
What is a Cable Length and a Digit?
A Cable Length (symbol cb), often shortened to cable, is a nautical unit of length, traditionally related to the length of a ship's anchor cable. While its exact length has varied historically and geographically, it is now most commonly defined internationally as one-tenth of a nautical mile (1/10 NM).
This standard definition equates to:
- 185.2 meters (m)
- Approximately 607.61 feet (ft)
- Approximately 202.54 yards (yd)
Other historical definitions based on the fathom also exist.
The Digit, also known as the finger or fingerbreadth, is an ancient, anthropomorphic unit of length, originally based on the breadth (width) of a human adult finger (typically the index finger). As a body-based unit, its value varied significantly depending on the person, time period, and culture.
Historically, it was often considered to be approximately 3/4 of an inch or about 1.9 centimeters (cm). In many systems, it formed a subdivision of larger units like the palm, span, or cubit. For example, it was common for:
- 4 digits = 1 palm
- 12 digits = 1 span (sometimes)
- 24 or 28 digits = 1 cubit (depending on the cubit definition)
Note: The Cable Length is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Digit belongs to the imperial/US customary system.
History of the Cable Length and Digit
The unit originated from the practical length of a ship's anchor cable (or "shot" of chain) used in the age of sail. Anchor cables were typically manufactured in standard lengths that could be shackled together. This length provided a convenient unit for measuring distances related to anchoring and maneuvering close to shore or other vessels.
However, the length was not universally standardized:
- In the British Royal Navy, a cable was traditionally defined as 100 fathoms (equivalent to 600 feet or 182.88 meters).
- In the U.S. Navy, it was often defined as 120 fathoms (equivalent to 720 feet or 219.456 meters).
With the international adoption of the nautical mile (defined as 1852 meters), defining the cable as exactly one-tenth of this value (185.2 m) created a convenient, decimal-based relationship and became the most common modern standard, sometimes referred to as the "international cable length".
The digit is one of the oldest known units of measurement, used by ancient civilizations including the Egyptians, Mesopotamians, Greeks, Romans, and later across Europe. Its convenience stemmed from the ready availability of the human hand for estimation.
- Ancient Egypt: The digit (djeba) was a fundamental unit, with 28 digits forming the Royal Cubit.
- Ancient Rome: The Roman digit (digitus) was defined as 1/16 of a Roman foot, approximately 1.85 cm. Four digiti made a palmus (palm).
- Medieval England: The digit was often reckoned as 3/4 of an inch, derived from the barleycorn (3 barleycorns = 1 inch, 4 digits = 3 inches).
Due to its inherent variability and the rise of more standardized systems based on physical prototypes (like the yard or meter), the digit gradually fell out of practical use for trade and science, becoming largely obsolete by the early modern period.
Common Uses for cable lengths and digits
Explore the typical applications for both Cable Length (imperial/US) and Digit (imperial/US) to understand their common contexts.
Common Uses for cable lengths
The cable length, particularly the 1/10 NM definition, remains in use in specific maritime contexts:
- Nautical Navigation & Ship Handling: Measuring short distances at sea, such as the distance between ships in formation, distance off a navigational hazard, distance to a pier, estimating anchor drag, or describing the scope (length) of anchor cable paid out.
- Hydrographic Surveying: Historically used on nautical charts, although meters are now the primary international standard for depth and short distances on modern charts.
- Naval Terminology: Persists in naval traditions and communications for describing close ranges.
- Historical Context: Encountered in older maritime texts, logs, charts, and naval records.
Common Uses for digits
The digit is now obsolete for practical measurement but is encountered in:
- Historical Texts: Found in ancient and medieval documents describing dimensions of objects, buildings, or anatomical measurements.
- Archaeology & Anthropology: Used when interpreting historical measurements or comparing ancient systems.
- Figurative Language: Occasionally used informally to mean a very small distance ("just a digit more").
- Understanding Historical Units: Key to understanding the structure of ancient measurement systems (e.g., relationship to palm, cubit).
Frequently Asked Questions
Questions About Cable Length (cb)
What are the different values for a cable length?
The value depends on the definition being used:
- International Standard: 1 cable = 1/10 nautical mile = 185.2 meters ≈ 607.61 feet. (Most common modern definition)
- British Traditional: 1 cable = 100 fathoms = 182.88 meters = 600 feet.
- US Traditional: 1 cable = 120 fathoms = 219.456 meters = 720 feet.
Always clarify which definition is intended if precision is critical, though the 1/10 NM version is generally assumed today unless otherwise specified.
How many meters are in a standard cable length?
The internationally recognized standard cable length is exactly 185.2 meters.
How many feet are in a standard cable length?
The internationally recognized standard cable length is approximately 607.61 feet. The traditional British cable was 600 ft, and the traditional US cable was 720 ft.
Is the cable length related to the nautical mile?
Yes, the most common modern definition establishes a direct relationship: 1 cable length = 1/10 nautical mile.
Is the cable length an SI unit?
No, the cable length is not an SI unit. It is a traditional nautical unit derived from maritime practice and later linked to the nautical mile. The corresponding SI unit for length is the meter (m).
Is the cable length still used today?
Yes, while meters and nautical miles are standard for most navigation, the cable length (especially the 1/10 NM definition) is still actively used in specific maritime applications like anchoring, close maneuvering, naval operations, and sometimes in recreational boating contexts. It serves as a convenient subdivision of the nautical mile.
About Digit (digit)
How long is a digit?
There is no single, precise value for the digit because it was based on human anatomy and varied by system. Common historical approximations include:
- Approximately 0.75 inches (in)
- Approximately 1.85 to 1.9 centimeters (cm)
- Often defined as 1/4 of a palm or 1/16 of a foot within specific historical systems.
What is the relation between a digit and a palm?
In many historical systems (like the Roman and often the English), 4 digits were considered equal to 1 palm (the width of the hand across the base of the fingers).
What is the relation between a digit and a cubit?
The relationship varied. For example:
- The Egyptian Royal Cubit contained 28 digits.
- The common Greek and Roman cubits often contained 24 digits.
Is the digit an SI unit?
No, the digit is not an SI unit. It is an ancient, non-standardized, anthropomorphic unit. The corresponding SI unit for length is the meter (m).
Is the digit still used today?
No, the digit is not used for any standard or practical measurements today. Its use is confined to historical study, interpretation of old texts, and occasional figurative speech.
Where does the name 'digit' come from?
The name comes from the Latin word digitus, which means "finger" or "toe". This reflects the unit's origin based on the width of a human finger.
Conversion Table: Cable Length to Digit
| Cable Length (cb) | Digit (digit) |
|---|---|
| 1 | 9,721.785 |
| 5 | 48,608.924 |
| 10 | 97,217.848 |
| 25 | 243,044.619 |
| 50 | 486,089.239 |
| 100 | 972,178.478 |
| 500 | 4,860,892.389 |
| 1,000 | 9,721,784.777 |
All Length Conversions
Other Units from Length
- Meter (m)
- Kilometer (km)
- Hectometer (hm)
- Decimeter (dm)
- Centimeter (cm)
- Millimeter (mm)
- Inch (in)
- Foot (ft)
- Yard (yd)
- Mile (mi)
- Nautical Mile (NM)
- Micrometer (μm)
- Nanometer (nm)
- Light Year (ly)
- Astronomical Unit (AU)
- Parsec (pc)
- Angstrom (Å)
- Point (Typography) (pt)
- Mil/Thou (mil)
- Fathom (fath)
- Furlong (fur)
- Link (Gunter's) (li)
- Pace (pace)
- Span (span)
- Ell (ell)
- Finger (finger)
- Roman Mile (m.p.)
- Stadion (stadion)
- Chi (Chinese) (chi)
- Shaku (Japanese) (shaku)
- Li (Chinese) (li)
- Toise (toise)
- Bolt (bolt)
- Rope (rope)
- Smoot (smoot)
- Sajene (sajene)
- Ken (ken)
- Wa (wa)
- Vara (vara)
- Aln (aln)
- Cubit (Royal/Egyptian) (cubit)
- Versta (versta)
- Arpent (arpent)
- Ri (Japanese) (ri)
- Klafter (klafter)
- Yojana (yojana)
- Skein (skein)