Cable Length to Nautical Mile Converter

Convert cable lengths to nautical miles with our free online length converter.

Quick Answer

1 Cable Length = 0.1 nautical miles

Formula: Cable Length × conversion factor = Nautical Mile

Use the calculator below for instant, accurate conversions.

Our Accuracy Guarantee

All conversion formulas on UnitsConverter.io have been verified against NIST (National Institute of Standards and Technology) guidelines and international SI standards. Our calculations are accurate to 10 decimal places for standard conversions and use arbitrary precision arithmetic for astronomical units.

Last verified: December 2025Reviewed by: Sam Mathew, Software Engineer

Cable Length to Nautical Mile Calculator

How to Use the Cable Length to Nautical Mile Calculator:

  1. Enter the value you want to convert in the 'From' field (Cable Length).
  2. The converted value in Nautical Mile will appear automatically in the 'To' field.
  3. Use the dropdown menus to select different units within the Length category.
  4. Click the swap button (⇌) to reverse the conversion direction.
Share:

How to Convert Cable Length to Nautical Mile: Step-by-Step Guide

Converting Cable Length to Nautical Mile involves multiplying the value by a specific conversion factor, as shown in the formula below.

Formula:

1 Cable Length = 0.1 nautical miles

Example Calculation:

Convert 10 cable lengths: 10 × 0.1 = 1 nautical miles

Disclaimer: For Reference Only

These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.

Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.

What is a Cable Length and a Nautical Mile?

A Cable Length (symbol cb), often shortened to cable, is a nautical unit of length, traditionally related to the length of a ship's anchor cable. While its exact length has varied historically and geographically, it is now most commonly defined internationally as one-tenth of a nautical mile (1/10 NM).

This standard definition equates to:

  • 185.2 meters (m)
  • Approximately 607.61 feet (ft)
  • Approximately 202.54 yards (yd)

Other historical definitions based on the fathom also exist.

A nautical mile (symbol: NM or nmi) is a unit of length specifically designed for marine and air navigation, officially defined as exactly 1,852 meters (approximately 6,076.115 feet or 1.15078 statute miles).

Why Is the Nautical Mile Special?

Unlike arbitrary land-based distance units (statute miles, kilometers), the nautical mile is geometrically derived from Earth's dimensions:

1 nautical mile = 1 minute of arc along any meridian (line of longitude)

This means:

  • 60 nautical miles = 1 degree of latitude
  • 1,800 nautical miles = 30 degrees of latitude
  • 10,800 nautical miles = 180 degrees (equator to pole along a meridian)

Navigation Advantages

This geometric relationship provides critical benefits for navigation:

1. Direct Coordinate Conversion:

  • If your ship is at 40°N latitude and sails due north to 41°N, you've traveled exactly 60 nautical miles
  • No conversion factors needed—degrees and minutes directly translate to distance

2. Chart Plotting Simplicity:

  • Nautical charts have latitude scales on the sides
  • Measure distance by comparing to the chart's latitude scale at the same latitude
  • One minute of latitude = one nautical mile (exact)

3. Celestial Navigation:

  • When using sextants to measure star/sun angles, angular measurements directly convert to distance
  • Essential for historical navigation before GPS

4. Universal Consistency:

  • The nautical mile works identically at all latitudes (unlike longitude distances, which vary)
  • International standard used by all maritime and aviation authorities

Nautical Mile vs. Statute Mile

| Attribute | Nautical Mile | Statute Mile | |-----------|--------------|--------------| | Definition | 1,852 meters (Earth-geometry based) | 1,609.344 meters (historical land measurement) | | Length in Feet | 6,076.115 ft | 5,280 ft | | Basis | 1 minute of latitude arc | Historical English mile (1,000 paces) | | Primary Use | Maritime & aviation navigation | Land distances, road travel | | Ratio | 1 NM = 1.15078 statute miles | 1 mi = 0.86898 nautical miles | | Speed Unit | Knot (NM/hour) | Miles per hour (mph) | | International Standard | Yes (since 1929) | No (U.S., U.K. primarily) |

The Knot: Nautical Speed

A knot is one nautical mile per hour:

  • 10 knots = 10 NM/hour = 18.52 km/h = 11.5 mph
  • 30 knots = 30 NM/hour = 55.56 km/h = 34.5 mph

Why "knot"? The term comes from 17th-century ship speed measurement using a chip log—a wooden board tied to a rope with knots at regular intervals (typically every 47 feet 3 inches, or 14.4 meters). Sailors would throw the board overboard and count how many knots passed through their hands in a specific time (usually 28 seconds measured by sandglass). This gave an approximate speed in "knots."

Modern Usage: While chip logs are obsolete, "knot" remains the universal maritime and aviation speed unit. Ships' logs, flight plans, weather reports, and international regulations all use knots.


Note: The Cable Length is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Nautical Mile belongs to the imperial/US customary system.

History of the Cable Length and Nautical Mile

The unit originated from the practical length of a ship's anchor cable (or "shot" of chain) used in the age of sail. Anchor cables were typically manufactured in standard lengths that could be shackled together. This length provided a convenient unit for measuring distances related to anchoring and maneuvering close to shore or other vessels.

However, the length was not universally standardized:

  • In the British Royal Navy, a cable was traditionally defined as 100 fathoms (equivalent to 600 feet or 182.88 meters).
  • In the U.S. Navy, it was often defined as 120 fathoms (equivalent to 720 feet or 219.456 meters).

With the international adoption of the nautical mile (defined as 1852 meters), defining the cable as exactly one-tenth of this value (185.2 m) created a convenient, decimal-based relationship and became the most common modern standard, sometimes referred to as the "international cable length".

of the Nautical Mile

Ancient Navigation: The Seeds of Angular Distance (c. 300 BCE - 1500 CE)

Greek Geodesy (c. 240 BCE):

  • Eratosthenes calculated Earth's circumference with remarkable accuracy (~250,000 stadia = ~39,375 km, only ~2% error from modern value 40,075 km)
  • Established that Earth is spherical and could be measured in angular degrees
  • Greek astronomers divided circles into 360 degrees, each degree into 60 minutes, each minute into 60 seconds

Ptolemy's Geography (c. 150 CE):

  • Ptolemy created maps using latitude and longitude coordinates
  • His calculations of Earth's circumference were less accurate than Eratosthenes' (underestimated by ~30%)
  • This error influenced European explorers for over 1,000 years

Medieval Navigation (c. 1000-1500 CE):

  • Vikings and Arab sailors navigated using dead reckoning (estimated speed × time) and celestial observations
  • No standard distance unit tied to Earth's geometry yet
  • Various regional distance measures: leagues, Roman miles, Arabic farsakh, etc.

The Age of Exploration: Linking Angles to Distance (1500-1800)

Navigational Revolution (16th Century):

  • Development of portolan charts (Mediterranean sailing charts)
  • Invention of cross-staff and backstaff for measuring celestial angles
  • Navigators increasingly aware that angular measurements could determine position

The Sextant Era (1731):

  • John Hadley (England) and Thomas Godfrey (America) independently invented the sextant
  • Allowed precise measurement of angles between celestial objects and horizon (accuracy: ±0.1 minute of arc)
  • Enabled celestial navigation: determining latitude by measuring sun's or Polaris's altitude
  • Created practical need for distance unit corresponding to angular measurements

Emerging Nautical Mile Variants (1700s):

  • British Admiralty Mile: 6,080 feet (based on British measurements of Earth)
  • Various European Miles: Different countries defined nautical miles based on their estimates of Earth's circumference
  • No international standard yet—created confusion in international navigation

The Problem of Longitude:

  • While latitude could be determined astronomically, longitude required accurate timekeeping
  • John Harrison's marine chronometer (1760s) solved this, enabling precise position fixing
  • Further emphasized need for standardized navigation units

The 19th Century: Toward Standardization

National Definitions: By the mid-1800s, major maritime nations used different nautical miles:

  • British Admiralty: 6,080 feet
  • United States: 6,080.20 feet (slightly different Earth measurements)
  • France: 1,852 meters (using metric system)
  • Germany, Italy: Various slightly different values

Geodetic Improvements:

  • Better measurements of Earth's shape revealed it's not a perfect sphere but an oblate spheroid (equatorial bulge)
  • One minute of latitude varies from 1,842.9 meters at the equator to 1,861.7 meters at the poles
  • Average: approximately 1,852 meters

International Trade and Navigation:

  • Steamship era (mid-1800s) increased international maritime traffic
  • Inconsistent nautical mile definitions caused practical problems:
    • Charts from different countries used different scales
    • Navigation calculations required conversion factors
    • International maritime law needed standard distances

International Standardization (1929)

The Monaco Conference (1929):

  • The International Extraordinary Hydrographic Conference convened in Monaco
  • Delegates from major maritime nations attended
  • Goal: Establish universal standards for hydrographic charts and maritime navigation

The 1,852 Meter Standard: The conference adopted:

  • 1 international nautical mile = 1,852 meters (exactly)
  • This equaled approximately 6,076.115 feet
  • Based on the average length of one minute of latitude over Earth's entire surface
  • Compromise between various national definitions

Why 1,852 meters?

  • Earth's mean circumference: ~40,007 km (at the poles and equator average)
  • 40,007,000 meters ÷ 360 degrees ÷ 60 minutes = 1,852.0 meters/minute (approximately)
  • Close to French definition (already 1,852 m), easing French adoption
  • Reasonably close to British/U.S. definitions (minimizing disruption)

Rapid International Adoption:

  • International Hydrographic Organization (IHO) promoted the standard
  • International Civil Aviation Organization (ICAO) adopted it for aviation (founded 1944)
  • By the 1950s-1960s, virtually all maritime and aviation authorities worldwide used 1,852 meters
  • United States officially adopted it in 1954 (though U.S. Coast and Geodetic Survey used it earlier)
  • United Kingdom adopted it in 1970, replacing the Admiralty mile

Modern Era (1950-Present)

Aviation Adoption:

  • Civil aviation adopted nautical miles and knots as standard units
  • Flight plans, air traffic control, pilot reports all use NM and knots
  • Altitude measured in feet, but horizontal distances in nautical miles

GPS and Electronic Navigation:

  • GPS coordinates use degrees, minutes, and seconds—directly compatible with nautical miles
  • Modern electronic chart systems (ECDIS - Electronic Chart Display and Information System) use nautical miles
  • Despite metrication in many countries, nautical mile remains universal for navigation

Why Not Kilometers?

  • Some advocated replacing nautical miles with kilometers (metric system)
  • Arguments against:
    1. Nautical mile's geometric relationship to latitude is uniquely valuable
    2. All existing charts, regulations, and equipment use nautical miles
    3. Aviation and maritime are inherently international—need consistent units
    4. Retraining entire global maritime and aviation workforce would be enormously expensive
  • Result: Nautical mile remains entrenched, with no serious movement to replace it

Legal Status:

  • Recognized by International System of Units (SI) as a "non-SI unit accepted for use with the SI"
  • Defined in terms of SI base unit (meter): 1 NM = 1,852 m (exact)
  • Official unit in international maritime law, aviation regulations, territorial waters definitions

Common Uses and Applications: cable lengths vs nautical miles

Explore the typical applications for both Cable Length (imperial/US) and Nautical Mile (imperial/US) to understand their common contexts.

Common Uses for cable lengths

The cable length, particularly the 1/10 NM definition, remains in use in specific maritime contexts:

  • Nautical Navigation & Ship Handling: Measuring short distances at sea, such as the distance between ships in formation, distance off a navigational hazard, distance to a pier, estimating anchor drag, or describing the scope (length) of anchor cable paid out.
  • Hydrographic Surveying: Historically used on nautical charts, although meters are now the primary international standard for depth and short distances on modern charts.
  • Naval Terminology: Persists in naval traditions and communications for describing close ranges.
  • Historical Context: Encountered in older maritime texts, logs, charts, and naval records.

When to Use nautical miles

of the Nautical Mile in Modern Contexts

1. Commercial Shipping and Maritime Trade

Virtually all ocean-going commerce uses nautical miles:

  • Voyage Planning: Routes calculated in nautical miles, speeds in knots
  • Fuel Consumption: Ships burn X tons of fuel per nautical mile at Y knots
  • Charter Rates: Sometimes calculated per nautical mile traveled
  • Port Distances: Official port-to-port distances published in nautical miles
  • Shipping Schedules: Container ship services maintain schedules based on NM distances

Industry Standard: International Maritime Organization (IMO) regulations, SOLAS (Safety of Life at Sea) convention, and all maritime treaties use nautical miles.

2. Aviation and Air Traffic Management

Every aspect of aviation navigation uses nautical miles and knots:

  • Flight Plans: Filed with distances in NM, estimated time en route
  • Air Traffic Control: Controllers vector aircraft using headings and distances in NM
  • Minimum Safe Altitudes: Calculated based on terrain within X nautical miles
  • Separation Standards: Aircraft must be separated by minimum NM horizontally or feet vertically
  • Fuel Planning: Endurance calculated as fuel available ÷ fuel burn per NM

Universal Standard: ICAO standards mandate nautical miles globally. Even countries using metric on land (Europe, Asia) use NM in aviation.

3. Military Operations and Defense

Naval and air forces worldwide use nautical miles:

  • Tactical Planning: Mission ranges, patrol areas, weapon ranges all in NM
  • Rules of Engagement: May specify engagement zones as X NM from assets
  • International Waters: Freedom of navigation operations occur beyond 12 NM territorial limit
  • Exercise Areas: Military training areas defined by coordinates with dimensions in NM

Interoperability: NATO and allied forces must use common units—nautical miles ensure coordination.

4. Oceanography and Marine Science

Scientists studying oceans use nautical miles naturally:

  • Research Vessel Cruises: Tracks measured in nautical miles sailed
  • Acoustic Surveys: Transects for fish surveys measured in NM
  • Ocean Currents: Velocities in knots, distances in NM
  • Whale Migration: Tracked in nautical miles traveled per day

Coordinate Integration: Scientific data tagged with lat/lon coordinates fits naturally with nautical mile distances.

5. Maritime Law Enforcement and Border Control

Coast guards and maritime police use nautical miles:

  • Patrol Areas: Assigned patrol zones measured in square NM
  • Pursuit Distances: Hot pursuit laws reference territorial limits (12 NM)
  • Smuggling Interdiction: Intercept calculations based on target speed (knots) and distance (NM)
  • Fisheries Enforcement: EEZ boundaries (200 NM) patrol and enforcement

6. Marine Charts and Navigation Publications

All official charts use nautical miles:

  • Paper Charts: Latitude scale serves as distance ruler (1 minute = 1 NM)
  • Electronic Charts (ECDIS): Display distances in NM by default
  • Sailing Directions: Describe routes, distances, hazards using NM
  • Light Lists: Lighthouse visibility ranges listed in nautical miles

Chart Scales: Often expressed as 1:X where X determines detail level. Common scales like 1:50,000 mean 1 cm on chart = 0.5 km = ~0.27 NM.

7. Weather Routing and Voyage Optimization

Modern shipping uses weather forecasting to optimize routes:

  • Weather Routing Services: Calculate optimal track to minimize voyage time and fuel
  • Forecast Models: Wind/wave forecasts presented with positions in lat/lon and coverage in NM
  • Routing Algorithms: Evaluate alternatives by comparing total NM distance + weather impacts
  • Fuel Savings: Avoiding storms may add 50 NM but save days and tons of fuel

Additional Unit Information

About Cable Length (cb)

What are the different values for a cable length?

The value depends on the definition being used:

  • International Standard: 1 cable = 1/10 nautical mile = 185.2 meters ≈ 607.61 feet. (Most common modern definition)
  • British Traditional: 1 cable = 100 fathoms = 182.88 meters = 600 feet.
  • US Traditional: 1 cable = 120 fathoms = 219.456 meters = 720 feet.

Always clarify which definition is intended if precision is critical, though the 1/10 NM version is generally assumed today unless otherwise specified.

How many meters are in a standard cable length?

The internationally recognized standard cable length is exactly 185.2 meters.

How many feet are in a standard cable length?

The internationally recognized standard cable length is approximately 607.61 feet. The traditional British cable was 600 ft, and the traditional US cable was 720 ft.

Is the cable length related to the nautical mile?

Yes, the most common modern definition establishes a direct relationship: 1 cable length = 1/10 nautical mile.

Is the cable length an SI unit?

No, the cable length is not an SI unit. It is a traditional nautical unit derived from maritime practice and later linked to the nautical mile. The corresponding SI unit for length is the meter (m).

Is the cable length still used today?

Yes, while meters and nautical miles are standard for most navigation, the cable length (especially the 1/10 NM definition) is still actively used in specific maritime applications like anchoring, close maneuvering, naval operations, and sometimes in recreational boating contexts. It serves as a convenient subdivision of the nautical mile.

About Nautical Mile (NM)

1. Why is a nautical mile different from a statute mile?

The nautical mile is based on Earth's geometry (1 minute of latitude arc = 1,852 meters), making it naturally suited for navigation using coordinates. The statute mile (1,609.344 meters) derives from ancient Roman measurements (1,000 paces) and medieval English units, with no relationship to Earth's dimensions. This geometric basis gives nautical miles a critical advantage: distance traveled in degrees/minutes of latitude directly equals nautical miles, eliminating conversion factors when plotting courses or calculating distances on charts. For example, sailing from 40°N to 41°N = exactly 60 NM, but converting to statute miles (69 mi) or kilometers (111 km) requires calculation. Since maritime and aviation navigation fundamentally relies on lat/lon coordinates, the nautical mile's direct correspondence makes it indispensable.

2. How many feet are in a nautical mile?

One nautical mile equals exactly 1,852 meters, which converts to approximately 6,076.115 feet (sometimes rounded to 6,076 ft). This is about 796 feet longer than a statute mile (5,280 feet), or roughly 15% longer. The feet-based measurement is derived from the official meter-based definition. In practical maritime and aviation contexts, the meter or kilometer equivalent is more commonly referenced internationally, though English-speaking mariners may use feet for depth soundings and altitude. Interestingly, the old British Admiralty mile was defined as exactly 6,080 feet before international standardization in 1929.

3. What is a knot in relation to a nautical mile?

A knot is a unit of speed equal to one nautical mile per hour (NM/h). The name comes from 17th-18th century ship speed measurement using a chip log—a wooden board on a rope with knots tied at regular intervals (~47.3 feet / 14.4 m apart). Sailors threw the log overboard and counted how many knots passed through their hands in 28 seconds (measured by sandglass). This count approximated the ship's speed in "knots." Modern usage: Knots are the universal speed unit in maritime and aviation contexts worldwide. Never say "knots per hour"—that's redundant (like saying "miles per hour per hour"). Correct: "The ship travels at 20 knots" (not "20 knots per hour"). Conversions: 1 knot = 1.852 km/h = 1.15078 mph = 0.51444 m/s.

4. Why do airplanes use nautical miles if they fly over land?

Aircraft use nautical miles for several reasons: 1) Navigation consistency - Pilots navigate using lat/lon coordinates (VOR stations, waypoints, airways), making nautical miles natural for distance calculations; 2) International standardization - ICAO (International Civil Aviation Organization) mandates nautical miles globally so pilots and controllers communicate in consistent units; 3) Integration with maritime - Coastal navigation, search and rescue, and naval aviation require coordination between sea and air assets; 4) Charts and instruments - Aviation charts (Sectional Charts, IFR En Route Charts) use nautical miles for scale; airborne radar, GPS displays show distances in NM; 5) Historical continuity - Early aviation borrowed navigation techniques from maritime practice, including units. Even flying from New York to Chicago (entirely over land), pilots file flight plans in nautical miles and track progress using NM-based waypoints.

5. Do ships and planes actually navigate by measuring minutes of latitude anymore?

While GPS has revolutionized navigation, making manual celestial navigation rare, the fundamental relationship between nautical miles and latitude remains essential: 1) GPS coordinates are still expressed in degrees/minutes/seconds—the same system nautical miles were designed for; 2) Electronic charts (ECDIS, aviation GPS) display positions in lat/lon and distances in NM, leveraging the 1-minute-of-latitude = 1-NM relationship; 3) Flight planning and voyage planning software calculates great circle routes using coordinates, then converts distances to NM automatically using the geometric relationship; 4) Regulatory requirements - Maritime and aviation regulations mandate backup navigation systems; ships must carry paper charts and be able to navigate traditionally; 5) Emergency situations - If electronics fail, mariners revert to celestial navigation and dead reckoning, where the NM-latitude relationship is invaluable. So yes, the underlying principle still matters daily.

6. What's the difference between a nautical mile and a geographic mile?

These terms are sometimes used interchangeably, but historically: A geographic mile was an older term for a distance equal to one minute of arc along Earth's equator, which varies slightly depending on the Earth model used (perfectly spherical vs. oblate spheroid). A nautical mile (modern standard: 1,852 m) represents one minute of arc of latitude along a meridian, averaged over Earth's entire surface. Because Earth is an oblate spheroid (slightly flattened at poles), one minute of latitude varies from 1,842.9 m at the equator to 1,861.7 m at the poles; 1,852 m is approximately the average. In modern usage, "geographic mile" is obsolete; everyone uses "nautical mile" (1,852 m exactly). Some historical texts or older navigators may reference "geographic mile," but it's effectively synonymous with nautical mile today.

7. Why don't countries using the metric system switch to kilometers for navigation?

Despite most countries adopting the metric system for land measurements, the nautical mile persists for several reasons: 1) Geometric advantage - The direct relationship to latitude (1 minute = 1 NM) is uniquely valuable for navigation, whereas kilometers have no such relationship; 2) International standardization - Maritime and aviation are inherently international; adopting a consistent unit globally (nautical mile) prevents confusion; 3) Massive infrastructure - All nautical charts, aviation charts, navigation instruments, regulations, training materials, and procedures worldwide use NM/knots. Converting would cost billions and risk safety during transition; 4) No compelling benefit - Switching to kilometers would eliminate the lat/lon correspondence without providing offsetting advantages; 5) Legal frameworks - Territorial waters (12 NM), EEZs (200 NM), international straits, flight information regions (FIRs) are all defined in nautical miles in treaties. Even the European Union, which strongly promotes metrication, uses nautical miles and knots in maritime and aviation contexts.

8. How does the nautical mile work at the poles where longitude lines converge?

The nautical mile is defined by latitude, not longitude, so it works identically everywhere from equator to poles. One minute of latitude arc along a meridian = 1 nautical mile, whether you're at 0°N (equator) or 89°N (near North Pole). Longitude is different: Longitude lines (meridians) converge at the poles. At the equator, 1 minute of longitude = 1 NM. At higher latitudes, 1 minute of longitude = 1 NM × cos(latitude). At 60°N/S, 1 minute of longitude = 0.5 NM. At 89°N/S, 1 minute of longitude ≈ 0.017 NM. At the poles themselves, longitude becomes undefined (all meridians meet). Practical implication: When navigating in polar regions, distances calculated from longitude differences require correction using cos(latitude), but distances from latitude differences remain straightforward (1 minute = 1 NM). Polar navigation also involves other challenges (magnetic compass unreliability near poles, ice, extreme weather), but the nautical mile's relationship to latitude remains consistent.

9. What's a "cable" in naval terminology, and how does it relate to nautical miles?

A cable (or cable length) is an informal unit used in naval and maritime contexts, traditionally defined as one-tenth of a nautical mile (approximately 185.2 meters or 607.6 feet). Example: "The destroyer is 5 cables astern" means 0.5 nautical miles behind. The term derives from historical ship operations where anchor cable lengths were a practical short-distance measure. In different navies, "cable" had slight variations: The British Admiralty defined 1 cable = 608 feet (1/10 of Admiralty mile of 6,080 ft). The U.S. Navy traditionally used 120 fathoms = 720 feet as 1 cable (different from 0.1 NM). Modern international standard: 1 cable = 0.1 nautical mile = 185.2 meters. The unit is mostly informal today, used in shiphandling, navigation reports, and naval communications for distances under 1 NM. You won't find "cables" on official charts or in regulations, but mariners understand it conversationally.

10. Can GPS calculate distances directly in nautical miles, or does it convert from meters?

GPS satellites transmit positions in terms of the WGS84 (World Geodetic System 1984) coordinate system, which defines Earth's shape and uses latitude/longitude coordinates. GPS receivers calculate distances using geodesic calculations on the WGS84 ellipsoid (accounting for Earth's actual shape—oblate spheroid). These distances are initially in meters (the SI base unit). However, marine and aviation GPS receivers are programmed to display distances in nautical miles by converting: meters ÷ 1,852 = nautical miles. This conversion is trivial computationally. The result: When your chartplotter or aviation GPS shows "125 NM to waypoint," it calculated the geodesic distance in meters, then divided by 1,852. The convenience is that GPS inherently works with lat/lon coordinates, which naturally align with nautical mile navigation concepts (1 minute of latitude ≈ 1 NM). So GPS doesn't "natively" calculate in NM, but the conversion is seamless and standard in maritime/aviation equipment.

11. Why is the international nautical mile exactly 1,852 meters and not a rounder number?

The 1,852-meter definition was chosen in 1929 because it represents the average length of one minute of latitude over Earth's entire surface, based on geodetic measurements available at the time. Earth is an oblate spheroid (equatorial radius ~6,378 km, polar radius ~6,357 km), so one minute of latitude varies: ~1,842.9 m at equator, ~1,861.7 m at poles. The average is approximately 1,852 meters. Why not round to 1,850 m or 1,900 m? 1) Minimizing disruption - 1,852 m was already the French nautical mile; adopting it avoided requiring France to change; 2) Close to existing standards - British Admiralty mile (6,080 ft = 1,853.18 m) and U.S. mile (6,080.20 ft = 1,853.24 m) were very close, easing transition; 3) Geographic accuracy - 1,852 m truly represents Earth's average, making navigation calculations accurate globally. Rounding to 1,800 or 2,000 m would have introduced errors and forced major maritime powers to adopt a number disconnected from their established practices.

12. What will happen to the nautical mile as navigation technology continues to evolve?

The nautical mile is likely to persist indefinitely despite technological advances: 1) Embedded in infrastructure - All maritime and aviation charts, instruments, regulations, training, and international treaties use nautical miles. Switching would require coordinated global change costing billions; 2) Geometric relevance endures - Even with GPS, positions are expressed in lat/lon coordinates. The 1-minute-of-latitude = 1-NM relationship remains useful for quick mental calculations and chart work; 3) International standardization success - The nautical mile is a rare example of a universally adopted standard (unlike metric vs. imperial debates). No country or organization is pushing to replace it; 4) Safety and conservatism - Aviation and maritime sectors are extremely conservative about changes affecting safety. Introducing a new unit (even kilometers) would risk miscommunication and accidents during transition; 5) Legal entrenchment - Treaties defining territorial waters (12 NM), EEZs (200 NM), and airspace boundaries would require renegotiation. Precedent: Despite metrication trends since the 1970s, the nautical mile has not only survived but strengthened its global position. Prediction: Nautical miles and knots will remain the standard for maritime and aviation navigation for the foreseeable future (next 50-100+ years).


Conversion Table: Cable Length to Nautical Mile

Cable Length (cb)Nautical Mile (NM)
0.50.05
10.1
1.50.15
20.2
50.5
101
252.5
505
10010
25025
50050
1,000100

People Also Ask

How do I convert Cable Length to Nautical Mile?

To convert Cable Length to Nautical Mile, enter the value in Cable Length in the calculator above. The conversion will happen automatically. Use our free online converter for instant and accurate results. You can also visit our length converter page to convert between other units in this category.

Learn more →

What is the conversion factor from Cable Length to Nautical Mile?

The conversion factor depends on the specific relationship between Cable Length and Nautical Mile. You can find the exact conversion formula and factor on this page. Our calculator handles all calculations automatically. See the conversion table above for common values.

Can I convert Nautical Mile back to Cable Length?

Yes! You can easily convert Nautical Mile back to Cable Length by using the swap button (⇌) in the calculator above, or by visiting our Nautical Mile to Cable Length converter page. You can also explore other length conversions on our category page.

Learn more →

What are common uses for Cable Length and Nautical Mile?

Cable Length and Nautical Mile are both standard units used in length measurements. They are commonly used in various applications including engineering, construction, cooking, and scientific research. Browse our length converter for more conversion options.

For more length conversion questions, visit our FAQ page or explore our conversion guides.

All Length Conversions

Meter to KilometerMeter to HectometerMeter to DecimeterMeter to CentimeterMeter to MillimeterMeter to InchMeter to FootMeter to YardMeter to MileMeter to Nautical MileMeter to MicrometerMeter to NanometerMeter to Light YearMeter to Astronomical UnitMeter to ParsecMeter to AngstromMeter to Point (Typography)Meter to Mil/ThouMeter to FathomMeter to FurlongMeter to Link (Gunter's)Meter to PaceMeter to SpanMeter to DigitMeter to Cable LengthMeter to EllMeter to FingerMeter to Roman MileMeter to StadionMeter to Chi (Chinese)Meter to Shaku (Japanese)Meter to Li (Chinese)Meter to ToiseMeter to BoltMeter to RopeMeter to SmootMeter to SajeneMeter to KenMeter to WaMeter to VaraMeter to AlnMeter to Cubit (Royal/Egyptian)Meter to VerstaMeter to ArpentMeter to Ri (Japanese)Meter to KlafterMeter to YojanaMeter to SkeinKilometer to MeterKilometer to HectometerKilometer to DecimeterKilometer to CentimeterKilometer to MillimeterKilometer to InchKilometer to FootKilometer to YardKilometer to MileKilometer to Nautical MileKilometer to MicrometerKilometer to NanometerKilometer to Light YearKilometer to Astronomical UnitKilometer to ParsecKilometer to AngstromKilometer to Point (Typography)Kilometer to Mil/ThouKilometer to FathomKilometer to FurlongKilometer to Link (Gunter's)Kilometer to PaceKilometer to SpanKilometer to DigitKilometer to Cable LengthKilometer to EllKilometer to FingerKilometer to Roman MileKilometer to StadionKilometer to Chi (Chinese)Kilometer to Shaku (Japanese)Kilometer to Li (Chinese)Kilometer to ToiseKilometer to BoltKilometer to RopeKilometer to SmootKilometer to SajeneKilometer to KenKilometer to WaKilometer to VaraKilometer to AlnKilometer to Cubit (Royal/Egyptian)Kilometer to VerstaKilometer to ArpentKilometer to Ri (Japanese)Kilometer to KlafterKilometer to YojanaKilometer to SkeinHectometer to MeterHectometer to KilometerHectometer to DecimeterHectometer to CentimeterHectometer to MillimeterHectometer to InchHectometer to FootHectometer to YardHectometer to MileHectometer to Nautical MileHectometer to MicrometerHectometer to NanometerHectometer to Light YearHectometer to Astronomical UnitHectometer to ParsecHectometer to AngstromHectometer to Point (Typography)Hectometer to Mil/ThouHectometer to FathomHectometer to FurlongHectometer to Link (Gunter's)Hectometer to PaceHectometer to SpanHectometer to Digit

Verified Against Authority Standards

All conversion formulas have been verified against international standards and authoritative sources to ensure maximum accuracy and reliability.

NIST Guide for the Use of SI

National Institute of Standards and TechnologyOfficial US standards for length measurements

SI Brochure

Bureau International des Poids et MesuresInternational System of Units official documentation

Last verified: December 3, 2025