Cable Length to Rope Conversion Calculator: Free Online Tool
Convert cable lengths to ropes with our free online length converter.
Cable Length to Rope Calculator
How to Use the Calculator:
- Enter the value you want to convert in the 'From' field (Cable Length).
- The converted value in Rope will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Cable Length to Rope
Converting Cable Length to Rope involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Cable Length = 30.38058 ropesExample Calculation:
Convert 10 cable lengths: 10 × 30.38058 = 303.8058 ropes
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
What is a Cable Length and a Rope?
A Cable Length (symbol cb), often shortened to cable, is a nautical unit of length, traditionally related to the length of a ship's anchor cable. While its exact length has varied historically and geographically, it is now most commonly defined internationally as one-tenth of a nautical mile (1/10 NM).
This standard definition equates to:
- 185.2 meters (m)
- Approximately 607.61 feet (ft)
- Approximately 202.54 yards (yd)
Other historical definitions based on the fathom also exist.
The Rope is an historical English unit of length, primarily used in surveying and sometimes in building or architecture. Its length was typically defined as 20 feet.
This equates to:
- 6.096 meters (m)
- Approximately 6.67 yards (yd)
Unlike more standardized surveying units like the chain, the rope's length could sometimes vary by region or specific use, but 20 feet is the most commonly cited value.
Note: The Cable Length is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Rope belongs to the imperial/US customary system.
History of the Cable Length and Rope
The unit originated from the practical length of a ship's anchor cable (or "shot" of chain) used in the age of sail. Anchor cables were typically manufactured in standard lengths that could be shackled together. This length provided a convenient unit for measuring distances related to anchoring and maneuvering close to shore or other vessels.
However, the length was not universally standardized:
- In the British Royal Navy, a cable was traditionally defined as 100 fathoms (equivalent to 600 feet or 182.88 meters).
- In the U.S. Navy, it was often defined as 120 fathoms (equivalent to 720 feet or 219.456 meters).
With the international adoption of the nautical mile (defined as 1852 meters), defining the cable as exactly one-tenth of this value (185.2 m) created a convenient, decimal-based relationship and became the most common modern standard, sometimes referred to as the "international cable length".
The origin of the Rope unit likely stems directly from the use of actual ropes of a predetermined length for measuring land or distances in medieval England and potentially earlier. Before the widespread adoption of more durable and precise measuring tools like metal chains (such as Gunter's chain, introduced in the 17th century), knotted or marked ropes served as practical, albeit less accurate, instruments for surveyors.
The length of 20 feet provided a convenient measure for certain types of land division or construction layout. However, ropes were susceptible to stretching, shrinking (when wet), and wear, leading to inconsistencies. This lack of precision contributed to its gradual replacement by the rod (16.5 feet) and the chain (66 feet) for official surveying work. The Rope unit fell into obsolescence as measurement standards became more rigorous and legally defined.
Common Uses for cable lengths and ropes
Explore the typical applications for both Cable Length (imperial/US) and Rope (imperial/US) to understand their common contexts.
Common Uses for cable lengths
The cable length, particularly the 1/10 NM definition, remains in use in specific maritime contexts:
- Nautical Navigation & Ship Handling: Measuring short distances at sea, such as the distance between ships in formation, distance off a navigational hazard, distance to a pier, estimating anchor drag, or describing the scope (length) of anchor cable paid out.
- Hydrographic Surveying: Historically used on nautical charts, although meters are now the primary international standard for depth and short distances on modern charts.
- Naval Terminology: Persists in naval traditions and communications for describing close ranges.
- Historical Context: Encountered in older maritime texts, logs, charts, and naval records.
Common Uses for ropes
The Rope is now an obsolete unit, but historically it was used for:
- Land Surveying: Measuring property boundaries, fields, and plots of land, particularly in older or less formal surveys.
- Building and Construction: Laying out foundations or measuring lengths in large-scale construction projects in historical contexts.
- Agriculture: Estimating field sizes or row lengths.
- Nautical Measurement (Less Common): Occasionally, "rope" might refer to specific lengths used on ships, but this is distinct from the land surveying unit and often context-dependent (similar to a "cable length").
Frequently Asked Questions
Questions About Cable Length (cb)
What are the different values for a cable length?
The value depends on the definition being used:
- International Standard: 1 cable = 1/10 nautical mile = 185.2 meters ≈ 607.61 feet. (Most common modern definition)
- British Traditional: 1 cable = 100 fathoms = 182.88 meters = 600 feet.
- US Traditional: 1 cable = 120 fathoms = 219.456 meters = 720 feet.
Always clarify which definition is intended if precision is critical, though the 1/10 NM version is generally assumed today unless otherwise specified.
How many meters are in a standard cable length?
The internationally recognized standard cable length is exactly 185.2 meters.
How many feet are in a standard cable length?
The internationally recognized standard cable length is approximately 607.61 feet. The traditional British cable was 600 ft, and the traditional US cable was 720 ft.
Is the cable length related to the nautical mile?
Yes, the most common modern definition establishes a direct relationship: 1 cable length = 1/10 nautical mile.
Is the cable length an SI unit?
No, the cable length is not an SI unit. It is a traditional nautical unit derived from maritime practice and later linked to the nautical mile. The corresponding SI unit for length is the meter (m).
Is the cable length still used today?
Yes, while meters and nautical miles are standard for most navigation, the cable length (especially the 1/10 NM definition) is still actively used in specific maritime applications like anchoring, close maneuvering, naval operations, and sometimes in recreational boating contexts. It serves as a convenient subdivision of the nautical mile.
About Rope (rope)
How long is a Rope?
The most common definition for the historical English Rope unit is 20 feet, which is exactly 6.096 meters.
How does the Rope compare to other surveying units?
- Rod (or Pole, Perch): 1 Rod = 16.5 feet. Therefore, 1 Rope ≈ 1.21 Rods.
- Gunter's Chain: 1 Chain = 66 feet = 4 Rods. Therefore, 1 Chain = 3.3 Ropes.
- Foot: 1 Rope = 20 feet.
- Yard: 1 Rope ≈ 6.67 yards.
Was the Rope a standardized unit?
No, it was not rigorously standardized like later units such as the foot or the Gunter's chain. While 20 feet was a common value, variations could exist, and the physical nature of a rope made it inherently less precise than metal instruments.
Is the Rope unit still used today?
No, the Rope as a formal unit of length is obsolete. Modern surveying uses meters, feet, and occasionally chains or rods in specific legal contexts (like older land deeds in the US), but not the Rope.
Is the Rope an SI unit?
No, the Rope is not an SI unit. It is a traditional English unit. The SI base unit for length is the meter (m).
Conversion Table: Cable Length to Rope
| Cable Length (cb) | Rope (rope) |
|---|---|
| 1 | 30.381 |
| 5 | 151.903 |
| 10 | 303.806 |
| 25 | 759.514 |
| 50 | 1,519.029 |
| 100 | 3,038.058 |
| 500 | 15,190.289 |
| 1,000 | 30,380.577 |
All Length Conversions
Other Units from Length
- Meter (m)
- Kilometer (km)
- Hectometer (hm)
- Decimeter (dm)
- Centimeter (cm)
- Millimeter (mm)
- Inch (in)
- Foot (ft)
- Yard (yd)
- Mile (mi)
- Nautical Mile (NM)
- Micrometer (μm)
- Nanometer (nm)
- Light Year (ly)
- Astronomical Unit (AU)
- Parsec (pc)
- Angstrom (Å)
- Point (Typography) (pt)
- Mil/Thou (mil)
- Fathom (fath)
- Furlong (fur)
- Link (Gunter's) (li)
- Pace (pace)
- Span (span)
- Digit (digit)
- Ell (ell)
- Finger (finger)
- Roman Mile (m.p.)
- Stadion (stadion)
- Chi (Chinese) (chi)
- Shaku (Japanese) (shaku)
- Li (Chinese) (li)
- Toise (toise)
- Bolt (bolt)
- Smoot (smoot)
- Sajene (sajene)
- Ken (ken)
- Wa (wa)
- Vara (vara)
- Aln (aln)
- Cubit (Royal/Egyptian) (cubit)
- Versta (versta)
- Arpent (arpent)
- Ri (Japanese) (ri)
- Klafter (klafter)
- Yojana (yojana)
- Skein (skein)