Cubit (Royal/Egyptian) to Pace Conversion Calculator: Free Online Tool
Convert cubits to paces with our free online length converter.
Cubit (Royal/Egyptian) to Pace Calculator
How to Use the Calculator:
- Enter the value you want to convert in the 'From' field (Cubit (Royal/Egyptian)).
- The converted value in Pace will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Cubit (Royal/Egyptian) to Pace
Converting Cubit (Royal/Egyptian) to Pace involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Cubit (Royal/Egyptian) = 0.686352 pacesExample Calculation:
Convert 10 cubits: 10 × 0.686352 = 6.863517 paces
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
What is a Cubit (Royal/Egyptian) and a Pace?
The Royal Cubit (Ancient Egyptian: meh nesut) was the primary ancient Egyptian standard unit of linear measure. It was based on the length of the forearm from the elbow to the tip of the extended middle finger, plus the width of the palm. It is considered one of the earliest attested standard units of measurement.
The Royal Cubit was typically divided into 7 palms (shesep), with each palm further divided into 4 digits or fingers (djeba), totaling 28 digits. Its length varied slightly over time and location but is generally accepted to be approximately 52.3 to 52.9 centimeters (about 20.6 to 20.8 inches). A common average value used is 0.524 meters.
A shorter Common Cubit or Short Cubit (Ancient Egyptian: meh sherer) also existed, measuring 6 palms (24 digits), approximately 45 cm.
The Pace is a unit of length based on the distance covered by a human step. Its definition is highly variable and depends heavily on context, often referring to either a single step or a double step.
- Single Step Pace: Often informally estimated as the distance from the heel of one foot to the heel of the next foot in a normal walking stride. Common estimations range from 2.5 to 3 feet (ft) or approximately 0.75 to 0.9 meters (m). This is sometimes simply called a 'step' or 'stride'.
- Double Step Pace (Roman Pace): Historically, the most significant definition was the Roman passus, which measured the distance from the heel of one foot to the point where the same foot touches the ground again (i.e., two steps). This was standardized as 5 Roman feet, roughly 1.48 meters or 4.86 feet.
Due to its inherent variability and dependence on individual gait and terrain, the pace is not a standardized unit for precise measurement.
Note: The Cubit (Royal/Egyptian) is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Pace belongs to the imperial/US customary system.
History of the Cubit (Royal/Egyptian) and Pace
The Royal Cubit emerged very early in Egyptian history, likely during the Predynastic or Early Dynastic Period (before 3000 BCE). Its standardization was crucial for the large-scale construction projects undertaken by the pharaohs.
- Early Standardization: It represents one of history's first successful attempts at creating and maintaining a standard unit of length, essential for architectural precision and administrative consistency.
- Cubit Rods: Physical standards, known as cubit rods, were created from durable materials like wood, slate, or granite. These rods were often inscribed with subdivisions (palms, digits, and sometimes fractions of digits) and sometimes bore dedications or official insignia. Examples have been found in tombs, such as that of Tutankhamun, and likely served as official benchmarks.
- Monumental Construction: The Royal Cubit was the fundamental unit used in the design and construction of temples, palaces, and most famously, the pyramids. The precise dimensions of structures like the Great Pyramid of Giza reflect careful measurement using this standard.
- Longevity: The Royal Cubit remained the standard measure in Egypt for millennia, from the Old Kingdom through the Ptolemaic period and into Roman times, demonstrating remarkable stability.
The pace is one of the most ancient and intuitive units of length, used across numerous cultures due to its direct link to human locomotion.
- Ancient Rome: The Romans formalized the passus (double step) as 5 pedes (Roman feet). This unit was fundamental to their system, with 1000 passus forming the Roman mile (mille passus), which heavily influenced the definition of the mile in later systems.
- Military Usage: Throughout history, armies used paces (both single and double) for marching cadence, estimating distances, and measuring fortifications or camp layouts. Standardized step lengths were often drilled.
- Informal Measurement: Before widespread standardized rulers and tapes, pacing was a common way for individuals to estimate lengths and distances for land, construction, or travel.
The pace gradually fell out of official use with the rise of standardized systems like the Imperial system (feet, yards) and the Metric system (meters), which offered greater precision and consistency.
Common Uses for cubits and paces
Explore the typical applications for both Cubit (Royal/Egyptian) (imperial/US) and Pace (imperial/US) to understand their common contexts.
Common Uses for cubits
The Royal Cubit was integral to many aspects of ancient Egyptian society:
- Architecture and Construction: Defining building dimensions, column heights, room layouts, and overall structural proportions.
- Land Surveying: Measuring fields for agriculture, taxation, and property boundaries, especially after the annual Nile flood receded.
- Record Keeping: Used in administrative documents, inventories, and calculations.
- Craftsmanship: Measuring materials like stone blocks, timber, rope, and textiles.
- Art and Iconography: Used to establish proportions in statues and reliefs according to canonical rules.
- Religious and Funerary Contexts: Cubit rods were sometimes included in tomb equipment, possibly symbolizing order and correctness or serving a practical purpose in the afterlife.
- Historical Texts: The term "cubit" appears in various ancient texts, including the Bible, though the specific length intended (Egyptian Royal, common, Babylonian, etc.) can be context-dependent.
Common Uses for paces
While obsolete for official measurements, the pace still finds some use:
- Rough Estimation: Used informally to get a quick approximation of distances, such as the length of a room, a garden plot, or walking distances in hiking or orienteering.
- Military & Marching Bands: Concepts related to pace length and cadence remain relevant in drilling and formation marching.
- Historical Context: Understanding the pace (especially the Roman passus) is crucial for interpreting historical texts, military accounts, and measurements related to ancient structures or distances.
- Exercise & Fitness: Step counters (pedometers) measure activity in terms of steps, which are essentially single paces.
Frequently Asked Questions
Questions About Cubit (Royal/Egyptian) (cubit)
How was the Royal Cubit standardized?
Standardization was achieved through the creation and maintenance of master cubit rods. These physical exemplars, often made of durable stone like granite, were likely kept in major temples or administrative centers. Officials and craftsmen would use copies made from these masters for practical work. The rods themselves were meticulously marked with the primary divisions of 7 palms and 28 digits, often including finer subdivisions. This system ensured consistency across large projects and different regions of the kingdom.
What is the difference between a short cubit and a royal cubit?
The two main cubit measures in ancient Egypt were:
- Short Cubit (meh sherer): Measured 6 palms (24 digits), approximately 44.7 to 45 cm (around 17.6 inches). It represented the distance from the elbow to the tip of the thumb or closed fist. It was likely used for more common, everyday measurements of cloth, goods, or smaller objects.
- Royal Cubit (meh nesut): Measured 7 palms (28 digits), approximately 52.3 to 52.9 cm (around 20.6 inches). It was the length from the elbow to the tip of the middle finger plus one palm width. This was the official standard used for monumental architecture, land surveying, and significant state projects. It likely held a higher status and was associated with the pharaoh and divine order.
How long was the Royal Cubit?
The Royal Cubit was approximately:
- 0.523 to 0.529 meters (m)
- 52.3 to 52.9 centimeters (cm)
- 20.6 to 20.8 inches (in)
- Roughly 1.72 feet (ft)
A value of 0.524 m is often used as a representative average.
Is the Cubit still used today?
No, the ancient Egyptian Cubit (both Royal and short) is obsolete. It has not been in practical use for centuries, having been replaced by other measurement systems and ultimately by the metric system. Its relevance today is purely historical, archaeological, and academic.
Is the Cubit an SI unit?
No, the Cubit is not an SI unit. It is an ancient, traditional unit of measurement originating in Egypt. The SI base unit for length is the meter (m).
About Pace (pace)
How long is a pace?
There is no single standard length for a "pace".
- An informal single step pace is often estimated at 2.5 to 3 feet (0.75 to 0.9 meters).
- The historical Roman pace (passus) was a double step, standardized at 5 Roman feet (approx. 1.48 meters or 4.86 feet). Always clarify which definition is being used.
What is the difference between a pace and a Roman pace?
A "pace" is ambiguous. It can mean a single step (variable length, ~2.5-3 ft) or a double step. The Roman pace (passus) specifically refers to the double step standardized at 5 Roman feet (~1.48 m).
What is the difference between a pace and a step or stride?
Often, "step" or "stride" refers to the distance covered by a single movement of one foot forward (heel-to-heel or toe-to-toe). "Pace" can mean this, but it can also refer to the Roman double step (passus). The ambiguity makes "step" or "stride" slightly clearer when referring to a single foot movement.
How many paces are in a mile?
This depends on the definition of "pace":
- Using the Roman pace (passus): The Roman mile (mille passus) was defined as 1000 paces (double steps).
- Using an informal single step pace: If we estimate a single step pace at 2.5 feet, a statute mile (5280 feet) would contain 5280 / 2.5 = 2112 single paces. If estimated at 3 feet, it would be 5280 / 3 = 1760 single paces. This is highly approximate.
Is the pace an SI unit?
No, the pace is not an SI unit. It is an ancient, non-standardized, anthropomorphic unit. The SI unit for length is the meter (m).
Is the pace still used today?
The pace is not used for any official, scientific, or trade measurements today due to its lack of standardization. Its use is confined to informal distance estimation, historical study, and contexts like military drilling or fitness tracking (as steps).
Conversion Table: Cubit (Royal/Egyptian) to Pace
| Cubit (Royal/Egyptian) (cubit) | Pace (pace) |
|---|---|
| 1 | 0.686 |
| 5 | 3.432 |
| 10 | 6.864 |
| 25 | 17.159 |
| 50 | 34.318 |
| 100 | 68.635 |
| 500 | 343.176 |
| 1,000 | 686.352 |
All Length Conversions
Other Units from Length
- Meter (m)
- Kilometer (km)
- Hectometer (hm)
- Decimeter (dm)
- Centimeter (cm)
- Millimeter (mm)
- Inch (in)
- Foot (ft)
- Yard (yd)
- Mile (mi)
- Nautical Mile (NM)
- Micrometer (μm)
- Nanometer (nm)
- Light Year (ly)
- Astronomical Unit (AU)
- Parsec (pc)
- Angstrom (Å)
- Point (Typography) (pt)
- Mil/Thou (mil)
- Fathom (fath)
- Furlong (fur)
- Link (Gunter's) (li)
- Span (span)
- Digit (digit)
- Cable Length (cb)
- Ell (ell)
- Finger (finger)
- Roman Mile (m.p.)
- Stadion (stadion)
- Chi (Chinese) (chi)
- Shaku (Japanese) (shaku)
- Li (Chinese) (li)
- Toise (toise)
- Bolt (bolt)
- Rope (rope)
- Smoot (smoot)
- Sajene (sajene)
- Ken (ken)
- Wa (wa)
- Vara (vara)
- Aln (aln)
- Versta (versta)
- Arpent (arpent)
- Ri (Japanese) (ri)
- Klafter (klafter)
- Yojana (yojana)
- Skein (skein)