Cubit (Royal/Egyptian) to Smoot Conversion Calculator: Free Online Tool
Convert cubits to smoots with our free online length converter.
Cubit (Royal/Egyptian) to Smoot Calculator
How to Use the Calculator:
- Enter the value you want to convert in the 'From' field (Cubit (Royal/Egyptian)).
- The converted value in Smoot will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Cubit (Royal/Egyptian) to Smoot
Converting Cubit (Royal/Egyptian) to Smoot involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Cubit (Royal/Egyptian) = 0.307322 smootsExample Calculation:
Convert 10 cubits: 10 × 0.307322 = 3.073217 smoots
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
What is a Cubit (Royal/Egyptian) and a Smoot?
The Royal Cubit (Ancient Egyptian: meh nesut) was the primary ancient Egyptian standard unit of linear measure. It was based on the length of the forearm from the elbow to the tip of the extended middle finger, plus the width of the palm. It is considered one of the earliest attested standard units of measurement.
The Royal Cubit was typically divided into 7 palms (shesep), with each palm further divided into 4 digits or fingers (djeba), totaling 28 digits. Its length varied slightly over time and location but is generally accepted to be approximately 52.3 to 52.9 centimeters (about 20.6 to 20.8 inches). A common average value used is 0.524 meters.
A shorter Common Cubit or Short Cubit (Ancient Egyptian: meh sherer) also existed, measuring 6 palms (24 digits), approximately 45 cm.
The Smoot is a non-standard, humorous unit of length created as part of an MIT fraternity prank in October 1958. It is defined by the height of Oliver R. Smoot (MIT class of 1962) at the time of the prank, which was 5 feet 7 inches.
This equates to:
- 67 inches (in)
- 1.7018 meters (m)
- Approximately 1.86 yards (yd)
Unlike standardized units, the Smoot is intrinsically tied to a specific individual's height at a particular moment and serves primarily as a cultural artifact and inside joke, particularly within the MIT community.
Note: The Cubit (Royal/Egyptian) is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Smoot belongs to the imperial/US customary system.
History of the Cubit (Royal/Egyptian) and Smoot
The Royal Cubit emerged very early in Egyptian history, likely during the Predynastic or Early Dynastic Period (before 3000 BCE). Its standardization was crucial for the large-scale construction projects undertaken by the pharaohs.
- Early Standardization: It represents one of history's first successful attempts at creating and maintaining a standard unit of length, essential for architectural precision and administrative consistency.
- Cubit Rods: Physical standards, known as cubit rods, were created from durable materials like wood, slate, or granite. These rods were often inscribed with subdivisions (palms, digits, and sometimes fractions of digits) and sometimes bore dedications or official insignia. Examples have been found in tombs, such as that of Tutankhamun, and likely served as official benchmarks.
- Monumental Construction: The Royal Cubit was the fundamental unit used in the design and construction of temples, palaces, and most famously, the pyramids. The precise dimensions of structures like the Great Pyramid of Giza reflect careful measurement using this standard.
- Longevity: The Royal Cubit remained the standard measure in Egypt for millennia, from the Old Kingdom through the Ptolemaic period and into Roman times, demonstrating remarkable stability.
The Smoot unit originated in October 1958 during the pledge activities of the Lambda Chi Alpha fraternity at MIT. Pledges were tasked with measuring the length of the Harvard Bridge, which connects Boston and Cambridge, Massachusetts, over the Charles River.
Instead of using conventional measuring tools, the fraternity members decided to use one of their pledges, Oliver Smoot, as the unit of measure. They repeatedly laid him down end-to-end across the bridge, marking off increments in paint. His companions carried him or helped him move for each new measurement.
The final measurement determined the bridge's length to be 364.4 Smoots "plus or minus one ear". The "ear" indicated the uncertainty of the measurement, adding to the absurdity and humor of the event.
The painted markings on the bridge became a local landmark. They have been maintained and periodically repainted over the decades, often unofficially by members of the fraternity or other MIT affiliates. The Cambridge Police Department traditionally tolerates the markings because, among other reasons, they serve as useful reference points for identifying locations along the bridge.
Interestingly, Oliver R. Smoot later became a prominent figure in standards organizations, serving as Chairman of the American National Standards Institute (ANSI) and President of the International Organization for Standardization (ISO), an ironic twist given his namesake unit's non-standard nature.
Common Uses for cubits and smoots
Explore the typical applications for both Cubit (Royal/Egyptian) (imperial/US) and Smoot (imperial/US) to understand their common contexts.
Common Uses for cubits
The Royal Cubit was integral to many aspects of ancient Egyptian society:
- Architecture and Construction: Defining building dimensions, column heights, room layouts, and overall structural proportions.
- Land Surveying: Measuring fields for agriculture, taxation, and property boundaries, especially after the annual Nile flood receded.
- Record Keeping: Used in administrative documents, inventories, and calculations.
- Craftsmanship: Measuring materials like stone blocks, timber, rope, and textiles.
- Art and Iconography: Used to establish proportions in statues and reliefs according to canonical rules.
- Religious and Funerary Contexts: Cubit rods were sometimes included in tomb equipment, possibly symbolizing order and correctness or serving a practical purpose in the afterlife.
- Historical Texts: The term "cubit" appears in various ancient texts, including the Bible, though the specific length intended (Egyptian Royal, common, Babylonian, etc.) can be context-dependent.
Common Uses for smoots
The Smoot is not used for any official, scientific, or commercial measurements. Its use is primarily cultural and humorous:
- Harvard Bridge Markings: The painted markings on the bridge sidewalk are its most famous application, indicating distance in Smoots from the Boston side. They are a well-known local landmark.
- MIT Culture and Slang: Used humorously within the MIT community and sometimes in the broader Boston area as a quirky local reference.
- Digital Recognition: The unit gained wider recognition when it was included as a unit of measurement in Google Calculator and Google Earth's ruler tool.
- Popular Culture: Occasionally referenced in media or tech circles as an example of a non-standard or humorous unit.
Frequently Asked Questions
Questions About Cubit (Royal/Egyptian) (cubit)
How was the Royal Cubit standardized?
Standardization was achieved through the creation and maintenance of master cubit rods. These physical exemplars, often made of durable stone like granite, were likely kept in major temples or administrative centers. Officials and craftsmen would use copies made from these masters for practical work. The rods themselves were meticulously marked with the primary divisions of 7 palms and 28 digits, often including finer subdivisions. This system ensured consistency across large projects and different regions of the kingdom.
What is the difference between a short cubit and a royal cubit?
The two main cubit measures in ancient Egypt were:
- Short Cubit (meh sherer): Measured 6 palms (24 digits), approximately 44.7 to 45 cm (around 17.6 inches). It represented the distance from the elbow to the tip of the thumb or closed fist. It was likely used for more common, everyday measurements of cloth, goods, or smaller objects.
- Royal Cubit (meh nesut): Measured 7 palms (28 digits), approximately 52.3 to 52.9 cm (around 20.6 inches). It was the length from the elbow to the tip of the middle finger plus one palm width. This was the official standard used for monumental architecture, land surveying, and significant state projects. It likely held a higher status and was associated with the pharaoh and divine order.
How long was the Royal Cubit?
The Royal Cubit was approximately:
- 0.523 to 0.529 meters (m)
- 52.3 to 52.9 centimeters (cm)
- 20.6 to 20.8 inches (in)
- Roughly 1.72 feet (ft)
A value of 0.524 m is often used as a representative average.
Is the Cubit still used today?
No, the ancient Egyptian Cubit (both Royal and short) is obsolete. It has not been in practical use for centuries, having been replaced by other measurement systems and ultimately by the metric system. Its relevance today is purely historical, archaeological, and academic.
Is the Cubit an SI unit?
No, the Cubit is not an SI unit. It is an ancient, traditional unit of measurement originating in Egypt. The SI base unit for length is the meter (m).
About Smoot (smoot)
How long is a Smoot?
One Smoot is exactly the height of Oliver R. Smoot in 1958:
- 5 feet 7 inches
- 67 inches
- 1.7018 meters
Is the Smoot an official or standardized unit?
No, the Smoot is not an official or standardized unit of measurement in any system (Imperial, US customary, or SI). It is a non-standard, humorous unit originating from a specific event.
Why is the bridge measurement "plus or minus one ear"?
The "plus or minus one ear" (often written as ± εar) reflects the humorous imprecision of the original measurement method using a person. It signifies the margin of error in a whimsical way, possibly referencing the difficulty of the final partial measurement or simply adding to the prank's absurdity.
Are the Smoot markings still on the Harvard Bridge?
Yes, the markings are traditionally repainted periodically (often by Lambda Chi Alpha members) and are considered a fixture of the bridge. During bridge renovations in 2011, the Massachusetts Department of Transportation restored the markings, acknowledging their cultural significance.
How does the Smoot compare to standard units?
- 1 Smoot = 1.7018 meters
- 1 Meter ≈ 0.5876 Smoots
- 1 Smoot = 5.583 feet (5 feet 7 inches)
- 1 Foot ≈ 0.1791 Smoots
Is the Smoot an SI unit?
No, the Smoot is not an SI unit. It is a non-standard, informal unit. The SI base unit for length is the meter (m).
What did Oliver Smoot think of the unit?
Oliver Smoot generally embraced his namesake unit with good humor throughout his life and career, often participating in events related to it at MIT.
Conversion Table: Cubit (Royal/Egyptian) to Smoot
| Cubit (Royal/Egyptian) (cubit) | Smoot (smoot) |
|---|---|
| 1 | 0.307 |
| 5 | 1.537 |
| 10 | 3.073 |
| 25 | 7.683 |
| 50 | 15.366 |
| 100 | 30.732 |
| 500 | 153.661 |
| 1,000 | 307.322 |
All Length Conversions
Other Units from Length
- Meter (m)
- Kilometer (km)
- Hectometer (hm)
- Decimeter (dm)
- Centimeter (cm)
- Millimeter (mm)
- Inch (in)
- Foot (ft)
- Yard (yd)
- Mile (mi)
- Nautical Mile (NM)
- Micrometer (μm)
- Nanometer (nm)
- Light Year (ly)
- Astronomical Unit (AU)
- Parsec (pc)
- Angstrom (Å)
- Point (Typography) (pt)
- Mil/Thou (mil)
- Fathom (fath)
- Furlong (fur)
- Link (Gunter's) (li)
- Pace (pace)
- Span (span)
- Digit (digit)
- Cable Length (cb)
- Ell (ell)
- Finger (finger)
- Roman Mile (m.p.)
- Stadion (stadion)
- Chi (Chinese) (chi)
- Shaku (Japanese) (shaku)
- Li (Chinese) (li)
- Toise (toise)
- Bolt (bolt)
- Rope (rope)
- Sajene (sajene)
- Ken (ken)
- Wa (wa)
- Vara (vara)
- Aln (aln)
- Versta (versta)
- Arpent (arpent)
- Ri (Japanese) (ri)
- Klafter (klafter)
- Yojana (yojana)
- Skein (skein)