Decimeter to Link (Gunter's) Converter
Convert decimeters to links with our free online length converter.
Quick Answer
1 Decimeter = 0.497097 links
Formula: Decimeter × conversion factor = Link (Gunter's)
Use the calculator below for instant, accurate conversions.
Our Accuracy Guarantee
All conversion formulas on UnitsConverter.io have been verified against NIST (National Institute of Standards and Technology) guidelines and international SI standards. Our calculations are accurate to 10 decimal places for standard conversions and use arbitrary precision arithmetic for astronomical units.
Decimeter to Link (Gunter's) Calculator
How to Use the Decimeter to Link (Gunter's) Calculator:
- Enter the value you want to convert in the 'From' field (Decimeter).
- The converted value in Link (Gunter's) will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Decimeter to Link (Gunter's): Step-by-Step Guide
Converting Decimeter to Link (Gunter's) involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Decimeter = 0.497097 linksExample Calculation:
Convert 10 decimeters: 10 × 0.497097 = 4.97097 links
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
Need to convert to other length units?
View all Length conversions →What is a Decimeter and a Link (Gunter's)?
The decimeter (symbol: dm) is a unit of length in the metric system. It is defined as exactly one-tenth (1/10) of a meter, which is the base unit of length in the International System of Units (SI). Therefore, 1 meter equals 10 decimeters.
The Link, specifically Gunter's Link (symbol li), is a unit of length historically used in surveying, particularly within the imperial and U.S. customary systems. It is defined as exactly 1/100th of a Gunter's chain.
One Gunter's link is equivalent to:
- 0.01 Gunter's chains
- 7.92 inches (in)
- 0.66 feet (ft) (exactly 2/3 of a foot)
- 0.22 yards (yd)
- 0.04 rods (also called poles or perches)
- 0.201168 meters (m) (exactly)
- 20.1168 centimeters (cm)
A Gunter's chain itself measures 66 feet, 22 yards, 4 rods, or 20.1168 meters.
Note: The Decimeter is part of the metric (SI) system, primarily used globally in science and trade. The Link (Gunter's) belongs to the imperial/US customary system.
History of the Decimeter and Link (Gunter's)
The decimeter originates from the French Revolution era, when the metric system was developed and introduced in France in the 1790s. The system aimed to create a rational and universal standard of measurement based on decimal multiples and submultiples of base units. The prefix "deci-" signifies a factor of one-tenth (10⁻¹). While the meter became the standard, the decimeter was defined as a convenient subdivision.
The link, as part of Gunter's chain, was devised by the English clergyman and mathematician Edmund Gunter around 1620. He introduced a measuring chain that was 66 feet long and divided into 100 links. This system was revolutionary for surveyors because its decimal nature (100 links per chain) simplified calculations, especially for area. Land area could be easily calculated in square chains and then converted to acres, as 10 square chains equal exactly 1 acre. Gunter's chain and its links became the standard tools for land surveying in England and later throughout the British Empire and the United States for centuries.
Common Uses and Applications: decimeters vs links
Explore the typical applications for both Decimeter (metric) and Link (Gunter's) (imperial/US) to understand their common contexts.
Common Uses for decimeters
Although less frequently used in everyday measurements compared to the meter, centimeter, or millimeter, the decimeter finds application in certain contexts:
- Education: Often used in schools to teach the metric system and decimal relationships (10 dm = 1 m, 1 dm = 10 cm).
- Crafts and Sewing: Sometimes used for measuring fabric or materials where increments of 10 centimeters are practical.
- Scientific Fields: Occasionally used in specific scientific measurements or contexts where this scale is convenient.
- Volume: The cubic decimeter (dm³) is a very common unit of volume, as it is exactly equal to one liter (L). This link makes the decimeter conceptually important in understanding metric volume.
When to Use links
The Gunter's link is now largely obsolete but was historically significant:
- Land Surveying: It was the fundamental unit for measuring property boundaries and land parcels in English-speaking countries for over 300 years.
- Cartography: Used in creating maps and plats based on surveys.
- Land Records: Measurements in links (and chains) frequently appear in older property deeds, historical surveys, and legal descriptions of land. Understanding the link is crucial for interpreting these documents.
- Agriculture: The system was tied to the definition of the acre, a common unit of land area.
Its use declined dramatically with the adoption of the metric system and the advent of more precise surveying technologies like steel tapes, theodolites, Electronic Distance Measurement (EDM), and GPS.
Additional Unit Information
About Decimeter (dm)
How many decimeters are in a meter?
There are exactly 10 decimeters in 1 meter.
How many centimeters are in a decimeter?
There are exactly 10 centimeters in 1 decimeter.
How many millimeters are in a decimeter?
There are exactly 100 millimeters in 1 decimeter (since 1 dm = 10 cm and 1 cm = 10 mm).
How do you convert decimeters to inches?
To convert decimeters to inches, multiply the number of decimeters by approximately 3.93701. For example, 2 dm is about 2 * 3.93701 = 7.874 inches.
Is the decimeter commonly used?
The decimeter is not as commonly used in everyday language or general measurements as meters, centimeters, or even millimeters. However, it is a standard metric unit and is particularly important conceptually due to the cubic decimeter being equal to a liter.
What is a cubic decimeter?
A cubic decimeter (dm³) is a unit of volume equal to the volume of a cube with sides one decimeter (10 cm) long. It is exactly equivalent to 1 liter (L).
About Link (Gunter's) (li)
How long is a Gunter's Link?
One Gunter's Link is equal to:
- 7.92 inches
- 0.66 feet (2/3 ft)
- 0.201168 meters
- 20.1168 centimeters
How many links are in a Gunter's chain?
There are exactly 100 links in one Gunter's chain.
How long is a Gunter's Chain?
One Gunter's chain is equal to:
- 100 links
- 66 feet
- 22 yards
- 4 rods (or poles, perches)
- 1/10th of a furlong
- 1/80th of a statute mile
- 20.1168 meters
How does the link relate to the acre?
The link is directly related to the acre through the Gunter's chain. An acre is defined as 10 square chains. Since 1 chain = 100 links:
- 1 acre = 10 × (100 links)² = 10 × 10,000 square links = 100,000 square links. This decimal relationship greatly simplified area calculations for surveyors using the chain.
Is the link an SI unit?
No, the Gunter's link is not an SI unit. It is part of the traditional imperial and U.S. customary systems. The corresponding SI unit for length is the meter (m).
Is the Gunter's link still used today?
No, the Gunter's link is rarely used in modern surveying practice. Its primary relevance today is in historical contexts, particularly when interpreting old land deeds, surveys, and maps created using Gunter's system. Modern surveying relies on meters or feet, measured with advanced electronic equipment.
Why was it called a 'link'?
It was called a 'link' because Gunter's chain was literally constructed from 100 physical metal links connected by rings. Each link served as a unit of measurement.
Conversion Table: Decimeter to Link (Gunter's)
| Decimeter (dm) | Link (Gunter's) (li) |
|---|---|
| 0.5 | 0.249 |
| 1 | 0.497 |
| 1.5 | 0.746 |
| 2 | 0.994 |
| 5 | 2.486 |
| 10 | 4.971 |
| 25 | 12.427 |
| 50 | 24.855 |
| 100 | 49.71 |
| 250 | 124.274 |
| 500 | 248.549 |
| 1,000 | 497.097 |
People Also Ask
How do I convert Decimeter to Link (Gunter's)?
To convert Decimeter to Link (Gunter's), enter the value in Decimeter in the calculator above. The conversion will happen automatically. Use our free online converter for instant and accurate results. You can also visit our length converter page to convert between other units in this category.
Learn more →What is the conversion factor from Decimeter to Link (Gunter's)?
The conversion factor depends on the specific relationship between Decimeter and Link (Gunter's). You can find the exact conversion formula and factor on this page. Our calculator handles all calculations automatically. See the conversion table above for common values.
Can I convert Link (Gunter's) back to Decimeter?
Yes! You can easily convert Link (Gunter's) back to Decimeter by using the swap button (⇌) in the calculator above, or by visiting our Link (Gunter's) to Decimeter converter page. You can also explore other length conversions on our category page.
Learn more →What are common uses for Decimeter and Link (Gunter's)?
Decimeter and Link (Gunter's) are both standard units used in length measurements. They are commonly used in various applications including engineering, construction, cooking, and scientific research. Browse our length converter for more conversion options.
For more length conversion questions, visit our FAQ page or explore our conversion guides.
Helpful Conversion Guides
Learn more about unit conversion with our comprehensive guides:
📚 How to Convert Units
Step-by-step guide to unit conversion with practical examples.
🔢 Conversion Formulas
Essential formulas for length and other conversions.
⚖️ Metric vs Imperial
Understand the differences between measurement systems.
⚠️ Common Mistakes
Learn about frequent errors and how to avoid them.
All Length Conversions
Other Length Units and Conversions
Explore other length units and their conversion options:
- Meter (m) • Decimeter to Meter
- Kilometer (km) • Decimeter to Kilometer
- Hectometer (hm) • Decimeter to Hectometer
- Centimeter (cm) • Decimeter to Centimeter
- Millimeter (mm) • Decimeter to Millimeter
- Inch (in) • Decimeter to Inch
- Foot (ft) • Decimeter to Foot
- Yard (yd) • Decimeter to Yard
- Mile (mi) • Decimeter to Mile
- Nautical Mile (NM) • Decimeter to Nautical Mile
Verified Against Authority Standards
All conversion formulas have been verified against international standards and authoritative sources to ensure maximum accuracy and reliability.
National Institute of Standards and Technology — Official US standards for length measurements
Bureau International des Poids et Mesures — International System of Units official documentation
Last verified: February 19, 2026