Decimeter to Smoot Converter
Convert decimeters to smoots with our free online length converter.
Quick Answer
1 Decimeter = 0.058761 smoots
Formula: Decimeter Γ conversion factor = Smoot
Use the calculator below for instant, accurate conversions.
Our Accuracy Guarantee
All conversion formulas on UnitsConverter.io have been verified against NIST (National Institute of Standards and Technology) guidelines and international SI standards. Our calculations are accurate to 10 decimal places for standard conversions and use arbitrary precision arithmetic for astronomical units.
Decimeter to Smoot Calculator
How to Use the Decimeter to Smoot Calculator:
- Enter the value you want to convert in the 'From' field (Decimeter).
- The converted value in Smoot will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (β) to reverse the conversion direction.
How to Convert Decimeter to Smoot: Step-by-Step Guide
Converting Decimeter to Smoot involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Decimeter = 0.0587613 smootsExample Calculation:
Convert 10 decimeters: 10 Γ 0.0587613 = 0.587613 smoots
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
Need to convert to other length units?
View all Length conversions βWhat is a Decimeter and a Smoot?
The decimeter (symbol: dm) is a unit of length in the metric system. It is defined as exactly one-tenth (1/10) of a meter, which is the base unit of length in the International System of Units (SI). Therefore, 1 meter equals 10 decimeters.
The Smoot is a non-standard, humorous unit of length created as part of an MIT fraternity prank in October 1958. It is defined by the height of Oliver R. Smoot (MIT class of 1962) at the time of the prank, which was 5 feet 7 inches.
This equates to:
- 67 inches (in)
- 1.7018 meters (m)
- Approximately 1.86 yards (yd)
Unlike standardized units, the Smoot is intrinsically tied to a specific individual's height at a particular moment and serves primarily as a cultural artifact and inside joke, particularly within the MIT community.
Note: The Decimeter is part of the metric (SI) system, primarily used globally in science and trade. The Smoot belongs to the imperial/US customary system.
History of the Decimeter and Smoot
The decimeter originates from the French Revolution era, when the metric system was developed and introduced in France in the 1790s. The system aimed to create a rational and universal standard of measurement based on decimal multiples and submultiples of base units. The prefix "deci-" signifies a factor of one-tenth (10β»ΒΉ). While the meter became the standard, the decimeter was defined as a convenient subdivision.
The Smoot unit originated in October 1958 during the pledge activities of the Lambda Chi Alpha fraternity at MIT. Pledges were tasked with measuring the length of the Harvard Bridge, which connects Boston and Cambridge, Massachusetts, over the Charles River.
Instead of using conventional measuring tools, the fraternity members decided to use one of their pledges, Oliver Smoot, as the unit of measure. They repeatedly laid him down end-to-end across the bridge, marking off increments in paint. His companions carried him or helped him move for each new measurement.
The final measurement determined the bridge's length to be 364.4 Smoots "plus or minus one ear". The "ear" indicated the uncertainty of the measurement, adding to the absurdity and humor of the event.
The painted markings on the bridge became a local landmark. They have been maintained and periodically repainted over the decades, often unofficially by members of the fraternity or other MIT affiliates. The Cambridge Police Department traditionally tolerates the markings because, among other reasons, they serve as useful reference points for identifying locations along the bridge.
Interestingly, Oliver R. Smoot later became a prominent figure in standards organizations, serving as Chairman of the American National Standards Institute (ANSI) and President of the International Organization for Standardization (ISO), an ironic twist given his namesake unit's non-standard nature.
Common Uses and Applications: decimeters vs smoots
Explore the typical applications for both Decimeter (metric) and Smoot (imperial/US) to understand their common contexts.
Common Uses for decimeters
Although less frequently used in everyday measurements compared to the meter, centimeter, or millimeter, the decimeter finds application in certain contexts:
- Education: Often used in schools to teach the metric system and decimal relationships (10 dm = 1 m, 1 dm = 10 cm).
- Crafts and Sewing: Sometimes used for measuring fabric or materials where increments of 10 centimeters are practical.
- Scientific Fields: Occasionally used in specific scientific measurements or contexts where this scale is convenient.
- Volume: The cubic decimeter (dmΒ³) is a very common unit of volume, as it is exactly equal to one liter (L). This link makes the decimeter conceptually important in understanding metric volume.
When to Use smoots
The Smoot is not used for any official, scientific, or commercial measurements. Its use is primarily cultural and humorous:
- Harvard Bridge Markings: The painted markings on the bridge sidewalk are its most famous application, indicating distance in Smoots from the Boston side. They are a well-known local landmark.
- MIT Culture and Slang: Used humorously within the MIT community and sometimes in the broader Boston area as a quirky local reference.
- Digital Recognition: The unit gained wider recognition when it was included as a unit of measurement in Google Calculator and Google Earth's ruler tool.
- Popular Culture: Occasionally referenced in media or tech circles as an example of a non-standard or humorous unit.
Additional Unit Information
About Decimeter (dm)
How many decimeters are in a meter?
There are exactly 10 decimeters in 1 meter.
How many centimeters are in a decimeter?
There are exactly 10 centimeters in 1 decimeter.
How many millimeters are in a decimeter?
There are exactly 100 millimeters in 1 decimeter (since 1 dm = 10 cm and 1 cm = 10 mm).
How do you convert decimeters to inches?
To convert decimeters to inches, multiply the number of decimeters by approximately 3.93701. For example, 2 dm is about 2 * 3.93701 = 7.874 inches.
Is the decimeter commonly used?
The decimeter is not as commonly used in everyday language or general measurements as meters, centimeters, or even millimeters. However, it is a standard metric unit and is particularly important conceptually due to the cubic decimeter being equal to a liter.
What is a cubic decimeter?
A cubic decimeter (dmΒ³) is a unit of volume equal to the volume of a cube with sides one decimeter (10 cm) long. It is exactly equivalent to 1 liter (L).
About Smoot (smoot)
How long is a Smoot?
One Smoot is exactly the height of Oliver R. Smoot in 1958:
- 5 feet 7 inches
- 67 inches
- 1.7018 meters
Is the Smoot an official or standardized unit?
No, the Smoot is not an official or standardized unit of measurement in any system (Imperial, US customary, or SI). It is a non-standard, humorous unit originating from a specific event.
Why is the bridge measurement "plus or minus one ear"?
The "plus or minus one ear" (often written as Β± Ξ΅ar) reflects the humorous imprecision of the original measurement method using a person. It signifies the margin of error in a whimsical way, possibly referencing the difficulty of the final partial measurement or simply adding to the prank's absurdity.
Are the Smoot markings still on the Harvard Bridge?
Yes, the markings are traditionally repainted periodically (often by Lambda Chi Alpha members) and are considered a fixture of the bridge. During bridge renovations in 2011, the Massachusetts Department of Transportation restored the markings, acknowledging their cultural significance.
How does the Smoot compare to standard units?
- 1 Smoot = 1.7018 meters
- 1 Meter β 0.5876 Smoots
- 1 Smoot = 5.583 feet (5 feet 7 inches)
- 1 Foot β 0.1791 Smoots
Is the Smoot an SI unit?
No, the Smoot is not an SI unit. It is a non-standard, informal unit. The SI base unit for length is the meter (m).
What did Oliver Smoot think of the unit?
Oliver Smoot generally embraced his namesake unit with good humor throughout his life and career, often participating in events related to it at MIT.
Conversion Table: Decimeter to Smoot
| Decimeter (dm) | Smoot (smoot) |
|---|---|
| 0.5 | 0.029 |
| 1 | 0.059 |
| 1.5 | 0.088 |
| 2 | 0.118 |
| 5 | 0.294 |
| 10 | 0.588 |
| 25 | 1.469 |
| 50 | 2.938 |
| 100 | 5.876 |
| 250 | 14.69 |
| 500 | 29.381 |
| 1,000 | 58.761 |
People Also Ask
How do I convert Decimeter to Smoot?
To convert Decimeter to Smoot, enter the value in Decimeter in the calculator above. The conversion will happen automatically. Use our free online converter for instant and accurate results. You can also visit our length converter page to convert between other units in this category.
Learn more βWhat is the conversion factor from Decimeter to Smoot?
The conversion factor depends on the specific relationship between Decimeter and Smoot. You can find the exact conversion formula and factor on this page. Our calculator handles all calculations automatically. See the conversion table above for common values.
Can I convert Smoot back to Decimeter?
Yes! You can easily convert Smoot back to Decimeter by using the swap button (β) in the calculator above, or by visiting our Smoot to Decimeter converter page. You can also explore other length conversions on our category page.
Learn more βWhat are common uses for Decimeter and Smoot?
Decimeter and Smoot are both standard units used in length measurements. They are commonly used in various applications including engineering, construction, cooking, and scientific research. Browse our length converter for more conversion options.
For more length conversion questions, visit our FAQ page or explore our conversion guides.
Helpful Conversion Guides
Learn more about unit conversion with our comprehensive guides:
π How to Convert Units
Step-by-step guide to unit conversion with practical examples.
π’ Conversion Formulas
Essential formulas for length and other conversions.
βοΈ Metric vs Imperial
Understand the differences between measurement systems.
β οΈ Common Mistakes
Learn about frequent errors and how to avoid them.
All Length Conversions
Other Length Units and Conversions
Explore other length units and their conversion options:
- Meter (m) β’ Decimeter to Meter
- Kilometer (km) β’ Decimeter to Kilometer
- Hectometer (hm) β’ Decimeter to Hectometer
- Centimeter (cm) β’ Decimeter to Centimeter
- Millimeter (mm) β’ Decimeter to Millimeter
- Inch (in) β’ Decimeter to Inch
- Foot (ft) β’ Decimeter to Foot
- Yard (yd) β’ Decimeter to Yard
- Mile (mi) β’ Decimeter to Mile
- Nautical Mile (NM) β’ Decimeter to Nautical Mile
Verified Against Authority Standards
All conversion formulas have been verified against international standards and authoritative sources to ensure maximum accuracy and reliability.
National Institute of Standards and Technology β Official US standards for length measurements
Bureau International des Poids et Mesures β International System of Units official documentation
Last verified: February 19, 2026