Digit to Aln Converter
Convert digits to alnar with our free online length converter.
Quick Answer
1 Digit = 0.032071 alnar
Formula: Digit × conversion factor = Aln
Use the calculator below for instant, accurate conversions.
Our Accuracy Guarantee
All conversion formulas on UnitsConverter.io have been verified against NIST (National Institute of Standards and Technology) guidelines and international SI standards. Our calculations are accurate to 10 decimal places for standard conversions and use arbitrary precision arithmetic for astronomical units.
Digit to Aln Calculator
How to Use the Digit to Aln Calculator:
- Enter the value you want to convert in the 'From' field (Digit).
- The converted value in Aln will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Digit to Aln: Step-by-Step Guide
Converting Digit to Aln involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Digit = 0.0320707 alnarExample Calculation:
Convert 10 digits: 10 × 0.0320707 = 0.320707 alnar
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
Need to convert to other length units?
View all Length conversions →What is a Digit and a Aln?
The Digit, also known as the finger or fingerbreadth, is an ancient, anthropomorphic unit of length, originally based on the breadth (width) of a human adult finger (typically the index finger). As a body-based unit, its value varied significantly depending on the person, time period, and culture.
Historically, it was often considered to be approximately 3/4 of an inch or about 1.9 centimeters (cm). In many systems, it formed a subdivision of larger units like the palm, span, or cubit. For example, it was common for:
- 4 digits = 1 palm
- 12 digits = 1 span (sometimes)
- 24 or 28 digits = 1 cubit (depending on the cubit definition)
The Aln (Swedish), Alen (Danish and Norwegian) was a traditional Scandinavian unit of length, analogous to the English ell or cubit. Its length varied significantly by region and time but was generally based on the length of the forearm.
Key standardized or common values include:
- Swedish Aln: Officially standardized (as the Rydaholmsaln) in 1665 and confirmed in 1735 as exactly 2 Swedish fot (feet). This equates to approximately 0.5938 meters (or 59.38 cm / 23.38 inches).
- Danish Alen: The common standard (Sjællandsk alen) was 2 Danish fod (feet), equating to approximately 0.6277 meters (or 62.77 cm / 24.71 inches).
- Norwegian Alen: Often followed the Danish standard due to political union. After 1824, it was legally defined as 2 Norwegian fot, equating to 0.6275 meters (or 62.75 cm / 24.70 inches), very close to the Danish value.
The Aln/Alen was typically subdivided into 4 kvarter (quarters).
Note: The Digit is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Aln belongs to the imperial/US customary system.
History of the Digit and Aln
The digit is one of the oldest known units of measurement, used by ancient civilizations including the Egyptians, Mesopotamians, Greeks, Romans, and later across Europe. Its convenience stemmed from the ready availability of the human hand for estimation.
- Ancient Egypt: The digit (djeba) was a fundamental unit, with 28 digits forming the Royal Cubit.
- Ancient Rome: The Roman digit (digitus) was defined as 1/16 of a Roman foot, approximately 1.85 cm. Four digiti made a palmus (palm).
- Medieval England: The digit was often reckoned as 3/4 of an inch, derived from the barleycorn (3 barleycorns = 1 inch, 4 digits = 3 inches).
Due to its inherent variability and the rise of more standardized systems based on physical prototypes (like the yard or meter), the digit gradually fell out of practical use for trade and science, becoming largely obsolete by the early modern period.
The Aln/Alen originates from the Proto-Germanic word for forearm (alinō), reflecting its basis as an anthropomorphic unit, similar to the cubit in other cultures. For centuries, its length was inconsistent, varying between regions, cities, and trades within Sweden, Denmark, and Norway.
- Early Variations: Numerous local standards existed, often based on physical rods kept by authorities or guilds.
- Standardization Efforts:
- Sweden: Attempts at standardization culminated in the adoption of the Rydaholmsaln (based on a specific iron standard bar from Rydaholm church) in 1665, defined as 2 fot. This standard (≈0.5938 m) became mandatory nationwide in 1735.
- Denmark & Norway: The Sjællandsk alen (Zealand ell, ≈0.6277 m) became the dominant standard in Denmark and, consequently, in Norway during their union. Norway later formally adopted a slightly different value (≈0.6275 m) based on its own fot definition in 1824.
- Metrication: The Aln/Alen was officially replaced by the metric system during the 19th and early 20th centuries: Norway in 1875, Sweden in 1889, and Denmark in 1907.
Common Uses and Applications: digits vs alnar
Explore the typical applications for both Digit (imperial/US) and Aln (imperial/US) to understand their common contexts.
Common Uses for digits
The digit is now obsolete for practical measurement but is encountered in:
- Historical Texts: Found in ancient and medieval documents describing dimensions of objects, buildings, or anatomical measurements.
- Archaeology & Anthropology: Used when interpreting historical measurements or comparing ancient systems.
- Figurative Language: Occasionally used informally to mean a very small distance ("just a digit more").
- Understanding Historical Units: Key to understanding the structure of ancient measurement systems (e.g., relationship to palm, cubit).
When to Use alnar
Historically, the Aln/Alen was a fundamental unit for everyday trade and craft:
- Textiles: Its most prominent use was measuring cloth (wool, linen, silk). Standardization was often driven by the textile trade.
- Timber and Lumber: Measuring lengths of wood.
- Rope and Cordage: Measuring lengths of rope.
- Construction: Used in building measurements, though perhaps less formally than in trade.
- General Trade: Measuring various goods sold by length.
It was less commonly used for land surveying, where units like the stång (rod) or mil (mile) were preferred.
Additional Unit Information
About Digit (digit)
How long is a digit?
There is no single, precise value for the digit because it was based on human anatomy and varied by system. Common historical approximations include:
- Approximately 0.75 inches (in)
- Approximately 1.85 to 1.9 centimeters (cm)
- Often defined as 1/4 of a palm or 1/16 of a foot within specific historical systems.
What is the relation between a digit and a palm?
In many historical systems (like the Roman and often the English), 4 digits were considered equal to 1 palm (the width of the hand across the base of the fingers).
What is the relation between a digit and a cubit?
The relationship varied. For example:
- The Egyptian Royal Cubit contained 28 digits.
- The common Greek and Roman cubits often contained 24 digits.
Is the digit an SI unit?
No, the digit is not an SI unit. It is an ancient, non-standardized, anthropomorphic unit. The corresponding SI unit for length is the meter (m).
Is the digit still used today?
No, the digit is not used for any standard or practical measurements today. Its use is confined to historical study, interpretation of old texts, and occasional figurative speech.
Where does the name 'digit' come from?
The name comes from the Latin word digitus, which means "finger" or "toe". This reflects the unit's origin based on the width of a human finger.
About Aln (aln)
How long is an Aln/Alen?
There isn't one single value, as it depended on the country and era. The main official standards were:
- Swedish Aln: ~0.594 meters / ~23.4 inches
- Danish Alen: ~0.628 meters / ~24.7 inches
- Norwegian Alen: ~0.628 meters / ~24.7 inches (very close to Danish)
Always consider the context (Swedish, Danish, or Norwegian) when encountering this unit in historical documents.
What's the difference between the Aln in different countries?
The primary difference was length:
- The Swedish Aln (≈59.4 cm) was noticeably shorter than the Danish and Norwegian Alen (both ≈62.8 cm).
- All were typically defined as 2 local fot (feet), but the length of the fot itself varied between the countries.
Is the Aln related to the English Ell?
Yes, both the Aln/Alen and the English Ell are historical units of length derived from the concept of the cubit or forearm length (Latin ulna). However, their standardized lengths differed significantly. The most common English Ell was 45 inches (1.143 m), much longer than any standard Scandinavian Aln/Alen.
Is the Aln/Alen still used today?
No, the Aln/Alen is obsolete. It was officially replaced by the meter in Sweden, Denmark, and Norway during the metrication process in the late 19th and early 20th centuries. Its use today is purely historical.
Is the Aln an SI unit?
No, the Aln/Alen is not an SI unit. It is a traditional unit from the historical Scandinavian systems of measurement. The SI base unit for length is the meter (m).
Conversion Table: Digit to Aln
| Digit (digit) | Aln (aln) |
|---|---|
| 0.5 | 0.016 |
| 1 | 0.032 |
| 1.5 | 0.048 |
| 2 | 0.064 |
| 5 | 0.16 |
| 10 | 0.321 |
| 25 | 0.802 |
| 50 | 1.604 |
| 100 | 3.207 |
| 250 | 8.018 |
| 500 | 16.035 |
| 1,000 | 32.071 |
People Also Ask
How do I convert Digit to Aln?
To convert Digit to Aln, enter the value in Digit in the calculator above. The conversion will happen automatically. Use our free online converter for instant and accurate results. You can also visit our length converter page to convert between other units in this category.
Learn more →What is the conversion factor from Digit to Aln?
The conversion factor depends on the specific relationship between Digit and Aln. You can find the exact conversion formula and factor on this page. Our calculator handles all calculations automatically. See the conversion table above for common values.
Can I convert Aln back to Digit?
Yes! You can easily convert Aln back to Digit by using the swap button (⇌) in the calculator above, or by visiting our Aln to Digit converter page. You can also explore other length conversions on our category page.
Learn more →What are common uses for Digit and Aln?
Digit and Aln are both standard units used in length measurements. They are commonly used in various applications including engineering, construction, cooking, and scientific research. Browse our length converter for more conversion options.
For more length conversion questions, visit our FAQ page or explore our conversion guides.
Helpful Conversion Guides
Learn more about unit conversion with our comprehensive guides:
📚 How to Convert Units
Step-by-step guide to unit conversion with practical examples.
🔢 Conversion Formulas
Essential formulas for length and other conversions.
⚖️ Metric vs Imperial
Understand the differences between measurement systems.
⚠️ Common Mistakes
Learn about frequent errors and how to avoid them.
All Length Conversions
Other Length Units and Conversions
Explore other length units and their conversion options:
- Meter (m) • Digit to Meter
- Kilometer (km) • Digit to Kilometer
- Hectometer (hm) • Digit to Hectometer
- Decimeter (dm) • Digit to Decimeter
- Centimeter (cm) • Digit to Centimeter
- Millimeter (mm) • Digit to Millimeter
- Inch (in) • Digit to Inch
- Foot (ft) • Digit to Foot
- Yard (yd) • Digit to Yard
- Mile (mi) • Digit to Mile
Verified Against Authority Standards
All conversion formulas have been verified against international standards and authoritative sources to ensure maximum accuracy and reliability.
National Institute of Standards and Technology — Official US standards for length measurements
Bureau International des Poids et Mesures — International System of Units official documentation
Last verified: February 19, 2026