Digit to Furlong Converter

Convert digits to furlongs with our free online length converter.

Quick Answer

1 Digit = 0.0000947 furlongs

Formula: Digit × conversion factor = Furlong

Use the calculator below for instant, accurate conversions.

Our Accuracy Guarantee

All conversion formulas on UnitsConverter.io have been verified against NIST (National Institute of Standards and Technology) guidelines and international SI standards. Our calculations are accurate to 10 decimal places for standard conversions and use arbitrary precision arithmetic for astronomical units.

Last verified: February 2026Reviewed by: Sam Mathew, Software Engineer

Digit to Furlong Calculator

How to Use the Digit to Furlong Calculator:

  1. Enter the value you want to convert in the 'From' field (Digit).
  2. The converted value in Furlong will appear automatically in the 'To' field.
  3. Use the dropdown menus to select different units within the Length category.
  4. Click the swap button (⇌) to reverse the conversion direction.
Share:

How to Convert Digit to Furlong: Step-by-Step Guide

Converting Digit to Furlong involves multiplying the value by a specific conversion factor, as shown in the formula below.

Formula:

1 Digit = 9.4697e-5 furlongs

Example Calculation:

Convert 10 digits: 10 × 9.4697e-5 = 0.00094697 furlongs

Disclaimer: For Reference Only

These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.

Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.

What is a Digit and a Furlong?

The Digit, also known as the finger or fingerbreadth, is an ancient, anthropomorphic unit of length, originally based on the breadth (width) of a human adult finger (typically the index finger). As a body-based unit, its value varied significantly depending on the person, time period, and culture.

Historically, it was often considered to be approximately 3/4 of an inch or about 1.9 centimeters (cm). In many systems, it formed a subdivision of larger units like the palm, span, or cubit. For example, it was common for:

  • 4 digits = 1 palm
  • 12 digits = 1 span (sometimes)
  • 24 or 28 digits = 1 cubit (depending on the cubit definition)

The Eighth of a Mile

The furlong is defined as exactly 1/8 of a statute mile.

Precise equivalents:

  • 220 yards (1/8 × 1,760 yards)
  • 660 feet (220 yards × 3 feet/yard)
  • 40 rods (traditional surveying unit; 1 rod = 16.5 feet)
  • 10 chains (1 chain = 66 feet = 4 rods)
  • 201.168 meters (exactly, using 1 yard = 0.9144 m)

Old English Etymology

"Furlang" = "furrow-long"

  • Furh (Old English) = furrow (a trench cut by a plow)
  • Lang (Old English) = long

Agricultural origin: In medieval open-field farming, peasants plowed long, narrow strips. The furlong represented the standard length of these strips—the distance a team of oxen could pull a heavy plow before needing to rest and turn around.

Why this specific distance?

  • Oxen stamina: Approximately 220 yards before fatigue
  • Practical turn-around: Long enough to be efficient, short enough to manage
  • Acre relationship: 1 furlong × 1 chain (66 ft) = 1 acre (historical definition)

The Chain-Furlong-Mile System

Edmund Gunter's surveyor's chain (1620):

  • 1 chain = 66 feet = 4 rods = 100 links
  • 10 chains = 1 furlong
  • 80 chains = 1 mile

Why 66 feet? Gunter designed the chain so that:

  • 10 square chains = 1 acre (exactly)
  • Easy conversion between area and distance
  • Practical length for field surveying (two surveyors could carry it)

This system dominated English-speaking land surveys for 300+ years.

Note: The Digit is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Furlong belongs to the imperial/US customary system.

History of the Digit and Furlong

The digit is one of the oldest known units of measurement, used by ancient civilizations including the Egyptians, Mesopotamians, Greeks, Romans, and later across Europe. Its convenience stemmed from the ready availability of the human hand for estimation.

  • Ancient Egypt: The digit (djeba) was a fundamental unit, with 28 digits forming the Royal Cubit.
  • Ancient Rome: The Roman digit (digitus) was defined as 1/16 of a Roman foot, approximately 1.85 cm. Four digiti made a palmus (palm).
  • Medieval England: The digit was often reckoned as 3/4 of an inch, derived from the barleycorn (3 barleycorns = 1 inch, 4 digits = 3 inches).

Due to its inherent variability and the rise of more standardized systems based on physical prototypes (like the yard or meter), the digit gradually fell out of practical use for trade and science, becoming largely obsolete by the early modern period.

Anglo-Saxon Origins (5th-11th Centuries)

Open-field strip farming: Medieval English villages practiced communal agriculture, with fields divided into long, narrow strips assigned to different families.

Strip dimensions:

  • Length: 1 furlong (~220 yards)
  • Width: 1 chain (~22 yards, later standardized to 1 chain = 66 feet / 4 rods)
  • Area: Approximately 1 acre

Plowing practice: Farmers plowed the length of the strip (1 furlong), then turned the ox team at the headland (the unplowed area at each end). The furlong emerged as the natural unit for this plowing distance.

Norman and Plantagenet Standardization (11th-14th Centuries)

Domesday Book (1086): William the Conqueror's land survey used furlongs and acres to catalog English landholdings, cementing these units in law.

Statute of 1305 (Edward I): Formalized the furlong as:

  • 40 rods (1 rod = 16.5 feet = 5.5 yards)
  • 1/8 mile
  • Standard for all land measurement in England

Acre definition: Legally defined as 1 furlong × 4 rods (1 furlong × 66 feet), creating the enduring acre-furlong relationship.

Edmund Gunter and the Surveyor's Chain (1620)

Revolutionary tool: English mathematician Edmund Gunter invented the surveyor's chain, a 66-foot measuring chain with 100 links.

Advantages:

  • Durability: Metal chain resisted wear better than ropes
  • Accuracy: Standardized links prevented stretching errors
  • Calculation ease: 100 links made decimal-like subdivision simple
  • Furlong integration: 10 chains = 1 furlong (exact)

Global spread: Gunter's chain became the standard surveying tool throughout the British Empire, spreading the furlong to:

  • North America (colonial land surveys)
  • Australia (1788 onwards)
  • India (British Raj)
  • Africa (colonial territories)

Horse Racing Adoption (18th Century)

The Jockey Club (founded 1750): British horse racing's governing body standardized race distances in furlongs and miles.

Common race distances established:

  • 5 furlongs: Sprint races
  • 1 mile (8 furlongs): Classic middle distance
  • 1.5 miles (12 furlongs): St. Leger Stakes (established 1776)
  • 2.5 miles (20 furlongs): Royal Ascot Gold Cup

Why furlongs?

  • Traditional British measurement
  • Convenient divisions of the mile
  • Allowed precise race distance specifications
  • Established in racecourse infrastructure (distance poles)

American Horse Racing (19th Century)

Kentucky Derby (1875): Established at 1.5 miles (12 furlongs), later shortened to 1.25 miles (10 furlongs) in 1896. The furlong became America's standard racing measurement.

Belmont Stakes (1867): Originally 1.625 miles, standardized to 1.5 miles (12 furlongs)—the "Test of the Champion."

Preakness Stakes (1873): Run at 9.5 furlongs (1.1875 miles).

All three Triple Crown races use furlong-based distances.

Metrication and Decline (20th Century)

UK Weights and Measures Act (1985): Officially transitioned Britain to metric system for most purposes. The furlong became obsolete for:

  • Road distances (now kilometers)
  • Land surveying (now meters)
  • General measurement (meters standard)

Exception: Horse racing Racing authorities worldwide retained furlongs, grandfathered as a traditional sporting measure.

Modern Persistence (21st Century)

Countries still using furlongs in horse racing:

  • United Kingdom: All thoroughbred racing
  • Ireland: All thoroughbred racing
  • United States: All thoroughbred and quarter horse racing
  • Canada: Thoroughbred racing
  • Australia: Some racing uses furlongs alongside meters
  • Myanmar (Burma): Road signs and general distance measurement

Global standard: Despite metrication, international horse racing maintains furlong terminology for consistency with historical records and tradition.

Common Uses and Applications: digits vs furlongs

Explore the typical applications for both Digit (imperial/US) and Furlong (imperial/US) to understand their common contexts.

Common Uses for digits

The digit is now obsolete for practical measurement but is encountered in:

  • Historical Texts: Found in ancient and medieval documents describing dimensions of objects, buildings, or anatomical measurements.
  • Archaeology & Anthropology: Used when interpreting historical measurements or comparing ancient systems.
  • Figurative Language: Occasionally used informally to mean a very small distance ("just a digit more").
  • Understanding Historical Units: Key to understanding the structure of ancient measurement systems (e.g., relationship to palm, cubit).

When to Use furlongs

1. Thoroughbred Horse Racing

Race distance specification: Nearly all English-language racing nations specify race lengths in furlongs.

Examples:

  • "A 6-furlong sprint on turf"
  • "The colt won at distances from 8 to 12 furlongs"
  • "She specializes in 5-furlong races"

Racecourse markers: Distance poles along the track show remaining furlongs to the finish (e.g., "4F" pole = 4 furlongs to go).

2. Breeding and Training

Horse pedigrees: Thoroughbred bloodlines are analyzed by optimal racing distances measured in furlongs.

Example: "This stallion's progeny excel at 8-10 furlongs, inheriting his stamina."

Training distances: Trainers describe workout distances in furlongs: "We gave him a strong 6-furlong breeze this morning."

3. Myanmar (Burma)

Road distances: Myanmar road signs often show distances in furlongs and miles rather than kilometers.

Example: "Yangon 12 furlongs" (1.5 miles ahead)

Why? British colonial legacy; Myanmar has resisted full metrication.

4. Historical Documents

Land deeds: Property descriptions in English-speaking countries often reference furlongs:

"Beginning at the oak tree, thence north 3 furlongs, thence east 2 furlongs..."

Literary references: Classic literature mentions furlongs for travel distances.

Additional Unit Information

About Digit (digit)

How long is a digit?

There is no single, precise value for the digit because it was based on human anatomy and varied by system. Common historical approximations include:

  • Approximately 0.75 inches (in)
  • Approximately 1.85 to 1.9 centimeters (cm)
  • Often defined as 1/4 of a palm or 1/16 of a foot within specific historical systems.

What is the relation between a digit and a palm?

In many historical systems (like the Roman and often the English), 4 digits were considered equal to 1 palm (the width of the hand across the base of the fingers).

What is the relation between a digit and a cubit?

The relationship varied. For example:

  • The Egyptian Royal Cubit contained 28 digits.
  • The common Greek and Roman cubits often contained 24 digits.

Is the digit an SI unit?

No, the digit is not an SI unit. It is an ancient, non-standardized, anthropomorphic unit. The corresponding SI unit for length is the meter (m).

Is the digit still used today?

No, the digit is not used for any standard or practical measurements today. Its use is confined to historical study, interpretation of old texts, and occasional figurative speech.

Where does the name 'digit' come from?

The name comes from the Latin word digitus, which means "finger" or "toe". This reflects the unit's origin based on the width of a human finger.

About Furlong (fur)

How many furlongs are in a mile?

Exactly 8 furlongs = 1 statute mile.

This is the defining relationship:

  • 1 furlong = 1/8 mile = 0.125 miles
  • 1 mile = 8 furlongs = 1,760 yards = 5,280 feet

How many yards/feet/meters are in a furlong?

1 furlong equals:

  • 220 yards (exactly)
  • 660 feet (220 × 3)
  • 201.168 meters (exactly, using international yard definition)

Derivation: 1 mile = 1,760 yards 1/8 mile = 1,760 ÷ 8 = 220 yards

Where is the furlong used most often today?

Primary use: Horse racing

Countries:

  • United Kingdom: All thoroughbred flat and jump racing
  • Ireland: All racing
  • United States: Thoroughbred and quarter horse racing standard
  • Canada: Thoroughbred racing
  • Australia: Some racing (alongside meters)

Secondary use:

  • Myanmar (Burma): Road distances, general measurement

Historical references:

  • Land deeds and property surveys (historical documents)
  • Classic literature

Is the furlong an SI unit?

No, the furlong is not part of the International System of Units (SI).

It belongs to the imperial and U.S. customary measurement systems. The SI unit for length is the meter.

Legal status:

  • UK: Permitted for specific uses (horse racing, historical contexts)
  • US: Legal, but not commonly used outside racing
  • Myanmar: Customary unit

Why is it called a furlong?

Etymology: Old English "furlang" = "furrow-long"

Origin:

  • Furh = furrow (trench cut by plow)
  • Lang = long

Agricultural meaning: The distance a team of oxen could plow a furrow before needing to rest—approximately 220 yards.

Historical context: Medieval open-field strip farming created long, narrow fields. The furlong defined the standard strip length, while the chain (66 feet) defined the width, producing a 1-acre plot.

Why does horse racing still use furlongs?

Historical tradition: British horse racing standardized on furlongs in the 18th century (Jockey Club, 1750). Racing infrastructure, records, and terminology built around furlongs over 270+ years.

Practical advantages:

  • Convenient divisions: 1 mile divides evenly into 8 furlongs, creating simple race distances (5, 6, 7, 8, 10, 12 furlongs)
  • Global consistency: Using furlongs allows comparison across centuries of racing records
  • Infrastructure: Historic racecourses designed with furlong markers and measurements

Resistance to change: Metrication efforts in the 1970s-1990s met strong resistance from racing traditionalists. The sport successfully lobbied to preserve furlongs as a cultural heritage measure.

How long is the Kentucky Derby in furlongs?

10 furlongs = 1.25 miles = 2,012 meters

History:

  • 1875-1895: 1.5 miles (12 furlongs)
  • 1896-present: 1.25 miles (10 furlongs)

The distance was shortened to 10 furlongs in 1896 and has remained unchanged since, becoming known as "The most exciting two minutes in sports" (approximate finishing time for winners).

What's the difference between a furlong and a chain?

Both are imperial length units, but different sizes:

Furlong:

  • 220 yards = 660 feet = 201.168 m
  • Used for longer distances (racing, field lengths)

Chain (Gunter's chain):

  • 66 feet = 22 yards = 20.1168 m
  • 1 furlong = 10 chains
  • Used for detailed land surveying

Historical relationship: Edmund Gunter designed the chain so that 10 chains = 1 furlong, creating an integrated surveying system.

Can I convert racecourse distances from furlongs to meters?

Yes, multiply by 201.168.

Common conversions:

  • 5 furlongs × 201.168 = 1,006 m (~1 km)
  • 6 furlongs × 201.168 = 1,207 m
  • 8 furlongs × 201.168 = 1,609 m (~1 mile)
  • 10 furlongs × 201.168 = 2,012 m
  • 12 furlongs × 201.168 = 2,414 m

Note: Many international racing jurisdictions use round meter distances (1200m, 1600m, 2000m) rather than exact furlong equivalents.

Is a furlong longer than a kilometer?

No, a furlong is shorter than a kilometer.

Comparison:

  • 1 furlong = 201.168 meters = 0.201 km
  • 1 kilometer = 1,000 meters ≈ 4.97 furlongs (~5 furlongs)

Memory aid: 5 furlongs ≈ 1 kilometer

Conversion Table: Digit to Furlong

Digit (digit)Furlong (fur)
0.50
10
1.50
20
50.001
100.001
250.002
500.005
1000.01
2500.024
5000.047
1,0000.095

People Also Ask

How do I convert Digit to Furlong?

To convert Digit to Furlong, enter the value in Digit in the calculator above. The conversion will happen automatically. Use our free online converter for instant and accurate results. You can also visit our length converter page to convert between other units in this category.

Learn more →

What is the conversion factor from Digit to Furlong?

The conversion factor depends on the specific relationship between Digit and Furlong. You can find the exact conversion formula and factor on this page. Our calculator handles all calculations automatically. See the conversion table above for common values.

Can I convert Furlong back to Digit?

Yes! You can easily convert Furlong back to Digit by using the swap button (⇌) in the calculator above, or by visiting our Furlong to Digit converter page. You can also explore other length conversions on our category page.

Learn more →

What are common uses for Digit and Furlong?

Digit and Furlong are both standard units used in length measurements. They are commonly used in various applications including engineering, construction, cooking, and scientific research. Browse our length converter for more conversion options.

For more length conversion questions, visit our FAQ page or explore our conversion guides.

All Length Conversions

Meter to KilometerMeter to HectometerMeter to DecimeterMeter to CentimeterMeter to MillimeterMeter to InchMeter to FootMeter to YardMeter to MileMeter to Nautical MileMeter to MicrometerMeter to NanometerMeter to Light YearMeter to Astronomical UnitMeter to ParsecMeter to AngstromMeter to Point (Typography)Meter to Mil/ThouMeter to FathomMeter to FurlongMeter to Link (Gunter's)Meter to PaceMeter to SpanMeter to DigitMeter to Cable LengthMeter to EllMeter to FingerMeter to Roman MileMeter to StadionMeter to Chi (Chinese)Meter to Shaku (Japanese)Meter to Li (Chinese)Meter to ToiseMeter to BoltMeter to RopeMeter to SmootMeter to SajeneMeter to KenMeter to WaMeter to VaraMeter to AlnMeter to Cubit (Royal/Egyptian)Meter to VerstaMeter to ArpentMeter to Ri (Japanese)Meter to KlafterMeter to YojanaMeter to SkeinKilometer to MeterKilometer to HectometerKilometer to DecimeterKilometer to CentimeterKilometer to MillimeterKilometer to InchKilometer to FootKilometer to YardKilometer to MileKilometer to Nautical MileKilometer to MicrometerKilometer to NanometerKilometer to Light YearKilometer to Astronomical UnitKilometer to ParsecKilometer to AngstromKilometer to Point (Typography)Kilometer to Mil/ThouKilometer to FathomKilometer to FurlongKilometer to Link (Gunter's)Kilometer to PaceKilometer to SpanKilometer to DigitKilometer to Cable LengthKilometer to EllKilometer to FingerKilometer to Roman MileKilometer to StadionKilometer to Chi (Chinese)Kilometer to Shaku (Japanese)Kilometer to Li (Chinese)Kilometer to ToiseKilometer to BoltKilometer to RopeKilometer to SmootKilometer to SajeneKilometer to KenKilometer to WaKilometer to VaraKilometer to AlnKilometer to Cubit (Royal/Egyptian)Kilometer to VerstaKilometer to ArpentKilometer to Ri (Japanese)Kilometer to KlafterKilometer to YojanaKilometer to SkeinHectometer to MeterHectometer to KilometerHectometer to DecimeterHectometer to CentimeterHectometer to MillimeterHectometer to InchHectometer to FootHectometer to YardHectometer to MileHectometer to Nautical MileHectometer to MicrometerHectometer to NanometerHectometer to Light YearHectometer to Astronomical UnitHectometer to ParsecHectometer to AngstromHectometer to Point (Typography)Hectometer to Mil/ThouHectometer to FathomHectometer to FurlongHectometer to Link (Gunter's)Hectometer to PaceHectometer to SpanHectometer to Digit

Verified Against Authority Standards

All conversion formulas have been verified against international standards and authoritative sources to ensure maximum accuracy and reliability.

NIST Guide for the Use of SI

National Institute of Standards and TechnologyOfficial US standards for length measurements

SI Brochure

Bureau International des Poids et MesuresInternational System of Units official documentation

Last verified: February 19, 2026