Finger to Aln Conversion Calculator: Free Online Tool
Convert fingers to alnar with our free online length converter.
Finger to Aln Calculator
How to Use the Calculator:
- Enter the value you want to convert in the 'From' field (Finger).
- The converted value in Aln will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Finger to Aln
Converting Finger to Aln involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Finger = 0.192424 alnarExample Calculation:
Convert 10 fingers: 10 × 0.192424 = 1.924242 alnar
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
What is a Finger and a Aln?
The Finger (sometimes finger's breadth, though this can be confusingly similar to the 'digit') is an archaic English unit of length. Its definition was inconsistent, leading to significant ambiguity. Two primary definitions existed:
-
As 1/8th of a yard: This was a common definition, equating the finger to:
- 4.5 inches (in)
- 1/2 of a quarter-yard (or "quarter")
- 0.1143 meters (m)
- 11.43 centimeters (cm)
-
As 1/16th of a yard: This definition made the finger identical to another unit called the nail, equating it to:
- 2.25 inches (in)
- 0.05715 meters (m)
- 5.715 centimeters (cm)
The term likely originated from anthropomorphic measurement but became tied to fractions of the standard yard, particularly in the context of measuring cloth. It is distinct from, and generally longer than, the unit called a digit (typically ~0.75 inches).
The Aln (Swedish), Alen (Danish and Norwegian) was a traditional Scandinavian unit of length, analogous to the English ell or cubit. Its length varied significantly by region and time but was generally based on the length of the forearm.
Key standardized or common values include:
- Swedish Aln: Officially standardized (as the Rydaholmsaln) in 1665 and confirmed in 1735 as exactly 2 Swedish fot (feet). This equates to approximately 0.5938 meters (or 59.38 cm / 23.38 inches).
- Danish Alen: The common standard (Sjællandsk alen) was 2 Danish fod (feet), equating to approximately 0.6277 meters (or 62.77 cm / 24.71 inches).
- Norwegian Alen: Often followed the Danish standard due to political union. After 1824, it was legally defined as 2 Norwegian fot, equating to 0.6275 meters (or 62.75 cm / 24.70 inches), very close to the Danish value.
The Aln/Alen was typically subdivided into 4 kvarter (quarters).
Note: The Finger is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Aln belongs to the imperial/US customary system.
History of the Finger and Aln
The finger was used historically in England, primarily from the medieval period into the early modern era. Its main application was in the measurement of cloth, alongside other specialized units like the nail (often 2.25 inches) and the ell (often 45 inches).
The existence of multiple definitions (4.5 inches vs. 2.25 inches) highlights the lack of strict standardization for many older units. The 2.25-inch finger was identical to the nail, suggesting the terms might have been used interchangeably in some contexts or that one definition arose from confusion with the other.
Compared to more fundamental units like the inch, foot, yard, or even the digit and palm, the "finger" as a distinct unit (especially the 4.5-inch version) appears less frequently in historical records. Its usage declined significantly with the standardization of the Imperial system (which favored inches and yards) and the later adoption of the metric system. It is now entirely obsolete.
The Aln/Alen originates from the Proto-Germanic word for forearm (alinō), reflecting its basis as an anthropomorphic unit, similar to the cubit in other cultures. For centuries, its length was inconsistent, varying between regions, cities, and trades within Sweden, Denmark, and Norway.
- Early Variations: Numerous local standards existed, often based on physical rods kept by authorities or guilds.
- Standardization Efforts:
- Sweden: Attempts at standardization culminated in the adoption of the Rydaholmsaln (based on a specific iron standard bar from Rydaholm church) in 1665, defined as 2 fot. This standard (≈0.5938 m) became mandatory nationwide in 1735.
- Denmark & Norway: The Sjællandsk alen (Zealand ell, ≈0.6277 m) became the dominant standard in Denmark and, consequently, in Norway during their union. Norway later formally adopted a slightly different value (≈0.6275 m) based on its own fot definition in 1824.
- Metrication: The Aln/Alen was officially replaced by the metric system during the 19th and early 20th centuries: Norway in 1875, Sweden in 1889, and Denmark in 1907.
Common Uses for fingers and alnar
Explore the typical applications for both Finger (imperial/US) and Aln (imperial/US) to understand their common contexts.
Common Uses for fingers
The finger is obsolete and has no modern practical application. Its relevance is primarily historical:
- Historical Cloth Trade: Measurements in "fingers" might be encountered in older English documents, inventories, or tailor's records related to textiles. Understanding its potential ambiguity (4.5 vs 2.25 inches) is crucial.
- Understanding Historical Units: Studying the finger helps illustrate the complexity and variability of pre-standardized measurement systems and the specific units used in the textile industry.
- Rare & Obsolete: It was never as widespread or consistently defined as units like the inch, foot, or yard.
Common Uses for alnar
Historically, the Aln/Alen was a fundamental unit for everyday trade and craft:
- Textiles: Its most prominent use was measuring cloth (wool, linen, silk). Standardization was often driven by the textile trade.
- Timber and Lumber: Measuring lengths of wood.
- Rope and Cordage: Measuring lengths of rope.
- Construction: Used in building measurements, though perhaps less formally than in trade.
- General Trade: Measuring various goods sold by length.
It was less commonly used for land surveying, where units like the stång (rod) or mil (mile) were preferred.
Frequently Asked Questions
Questions About Finger (finger)
How long is a Finger?
The length of a finger was not consistently defined. The two most common historical definitions in England were:
- 4.5 inches (11.43 cm), equal to 1/8th of a yard.
- 2.25 inches (5.715 cm), equal to 1/16th of a yard (and identical to the unit called a 'nail'). Context is essential when encountering this unit in historical texts.
Is a Finger the same as a Digit?
No. Although both terms relate to the human finger, they represented different historical units of length.
- The Digit (or fingerbreadth) was typically much shorter, around 0.75 inches (approx. 1.9 cm), representing the width of a finger.
- The Finger was significantly longer, either 4.5 inches or 2.25 inches, likely derived as a fraction of a yard rather than directly from finger anatomy in later usage.
What is the relationship between a Finger and a Nail?
The unit called a Nail was commonly defined as 1/16th of a yard (2.25 inches). Therefore:
- One definition of the Finger (2.25 inches) was identical to the Nail.
- The other common definition of the Finger (4.5 inches) was twice the length of a Nail.
Is the Finger an SI unit?
No, the finger is not an SI unit. It is an archaic, non-standardized unit primarily used historically in England. The SI base unit for length is the meter (m).
Is the Finger still used?
No, the finger as a unit of length is completely obsolete and is not used in any modern standard, scientific, or commercial measurements. Its relevance is purely historical.
Where does the name 'Finger' come from?
The name undoubtedly originates from the human finger. However, while the digit unit directly related to finger width, the 'Finger' unit (especially the 4.5-inch version) seems to have become a conventional term for a specific fraction (1/8th or 1/16th) of a yard, particularly in cloth measurement, losing its direct anatomical connection.
About Aln (aln)
How long is an Aln/Alen?
There isn't one single value, as it depended on the country and era. The main official standards were:
- Swedish Aln: ~0.594 meters / ~23.4 inches
- Danish Alen: ~0.628 meters / ~24.7 inches
- Norwegian Alen: ~0.628 meters / ~24.7 inches (very close to Danish)
Always consider the context (Swedish, Danish, or Norwegian) when encountering this unit in historical documents.
What's the difference between the Aln in different countries?
The primary difference was length:
- The Swedish Aln (≈59.4 cm) was noticeably shorter than the Danish and Norwegian Alen (both ≈62.8 cm).
- All were typically defined as 2 local fot (feet), but the length of the fot itself varied between the countries.
Is the Aln related to the English Ell?
Yes, both the Aln/Alen and the English Ell are historical units of length derived from the concept of the cubit or forearm length (Latin ulna). However, their standardized lengths differed significantly. The most common English Ell was 45 inches (1.143 m), much longer than any standard Scandinavian Aln/Alen.
Is the Aln/Alen still used today?
No, the Aln/Alen is obsolete. It was officially replaced by the meter in Sweden, Denmark, and Norway during the metrication process in the late 19th and early 20th centuries. Its use today is purely historical.
Is the Aln an SI unit?
No, the Aln/Alen is not an SI unit. It is a traditional unit from the historical Scandinavian systems of measurement. The SI base unit for length is the meter (m).
Conversion Table: Finger to Aln
| Finger (finger) | Aln (aln) |
|---|---|
| 1 | 0.192 |
| 5 | 0.962 |
| 10 | 1.924 |
| 25 | 4.811 |
| 50 | 9.621 |
| 100 | 19.242 |
| 500 | 96.212 |
| 1,000 | 192.424 |
All Length Conversions
Other Units from Length
- Meter (m)
- Kilometer (km)
- Hectometer (hm)
- Decimeter (dm)
- Centimeter (cm)
- Millimeter (mm)
- Inch (in)
- Foot (ft)
- Yard (yd)
- Mile (mi)
- Nautical Mile (NM)
- Micrometer (μm)
- Nanometer (nm)
- Light Year (ly)
- Astronomical Unit (AU)
- Parsec (pc)
- Angstrom (Å)
- Point (Typography) (pt)
- Mil/Thou (mil)
- Fathom (fath)
- Furlong (fur)
- Link (Gunter's) (li)
- Pace (pace)
- Span (span)
- Digit (digit)
- Cable Length (cb)
- Ell (ell)
- Roman Mile (m.p.)
- Stadion (stadion)
- Chi (Chinese) (chi)
- Shaku (Japanese) (shaku)
- Li (Chinese) (li)
- Toise (toise)
- Bolt (bolt)
- Rope (rope)
- Smoot (smoot)
- Sajene (sajene)
- Ken (ken)
- Wa (wa)
- Vara (vara)
- Cubit (Royal/Egyptian) (cubit)
- Versta (versta)
- Arpent (arpent)
- Ri (Japanese) (ri)
- Klafter (klafter)
- Yojana (yojana)
- Skein (skein)