Finger to Bolt Conversion Calculator: Free Online Tool
Convert fingers to bolts with our free online length converter.
Finger to Bolt Calculator
How to Use the Calculator:
- Enter the value you want to convert in the 'From' field (Finger).
- The converted value in Bolt will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Finger to Bolt
Converting Finger to Bolt involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Finger = 0.00375 boltsExample Calculation:
Convert 10 fingers: 10 × 0.00375 = 0.0375 bolts
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
What is a Finger and a Bolt?
The Finger (sometimes finger's breadth, though this can be confusingly similar to the 'digit') is an archaic English unit of length. Its definition was inconsistent, leading to significant ambiguity. Two primary definitions existed:
-
As 1/8th of a yard: This was a common definition, equating the finger to:
- 4.5 inches (in)
- 1/2 of a quarter-yard (or "quarter")
- 0.1143 meters (m)
- 11.43 centimeters (cm)
-
As 1/16th of a yard: This definition made the finger identical to another unit called the nail, equating it to:
- 2.25 inches (in)
- 0.05715 meters (m)
- 5.715 centimeters (cm)
The term likely originated from anthropomorphic measurement but became tied to fractions of the standard yard, particularly in the context of measuring cloth. It is distinct from, and generally longer than, the unit called a digit (typically ~0.75 inches).
A Bolt is a commercial unit of length primarily used for measuring rolls of cloth or fabric. Unlike standardized units like the meter or yard, the length of a bolt is not fixed and can vary significantly depending on the type of material, the manufacturer, the country of origin, and trade customs.
Common lengths often associated with a bolt include:
- 40 yards (approximately 36.58 meters) - Frequently cited, especially for cottons and silks in the US.
- 100 yards (approximately 91.44 meters) - Often used for heavier fabrics like canvas.
- Other lengths such as 30, 50, 60, or 120 yards may also be encountered.
The bolt represents a quantity convenient for wholesale trade, manufacturing, and inventory management rather than a precise scientific measurement.
Note: The Finger is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Bolt belongs to the imperial/US customary system.
History of the Finger and Bolt
The finger was used historically in England, primarily from the medieval period into the early modern era. Its main application was in the measurement of cloth, alongside other specialized units like the nail (often 2.25 inches) and the ell (often 45 inches).
The existence of multiple definitions (4.5 inches vs. 2.25 inches) highlights the lack of strict standardization for many older units. The 2.25-inch finger was identical to the nail, suggesting the terms might have been used interchangeably in some contexts or that one definition arose from confusion with the other.
Compared to more fundamental units like the inch, foot, yard, or even the digit and palm, the "finger" as a distinct unit (especially the 4.5-inch version) appears less frequently in historical records. Its usage declined significantly with the standardization of the Imperial system (which favored inches and yards) and the later adoption of the metric system. It is now entirely obsolete.
The concept of the bolt emerged from the practical needs of the textile industry. As cloth production scaled up, manufacturers and merchants needed a standardized way to handle, store, and trade large quantities of fabric. Winding cloth onto a roll or board (the "bolt") provided a convenient package.
The length associated with a bolt likely developed through trade customs specific to different types of fabric and regions. There was never a universal legal standard defining its length, leading to the wide variations seen historically and currently. While retail sales shifted towards measurement by the yard or meter, the bolt remained a useful unit in wholesale and industrial contexts. Even with the global adoption of the metric system, the term "bolt" persists in the textile trade as a reference to a full roll of fabric, though the exact length is usually specified separately in yards or meters.
Common Uses for fingers and bolts
Explore the typical applications for both Finger (imperial/US) and Bolt (imperial/US) to understand their common contexts.
Common Uses for fingers
The finger is obsolete and has no modern practical application. Its relevance is primarily historical:
- Historical Cloth Trade: Measurements in "fingers" might be encountered in older English documents, inventories, or tailor's records related to textiles. Understanding its potential ambiguity (4.5 vs 2.25 inches) is crucial.
- Understanding Historical Units: Studying the finger helps illustrate the complexity and variability of pre-standardized measurement systems and the specific units used in the textile industry.
- Rare & Obsolete: It was never as widespread or consistently defined as units like the inch, foot, or yard.
Common Uses for bolts
The bolt is almost exclusively used within the textile industry:
- Wholesale Trade: Fabric manufacturers sell cloth to distributors or large buyers in bolts.
- Manufacturing: Clothing and upholstery manufacturers purchase fabric by the bolt for production runs.
- Inventory Management: Textile mills, warehouses, and large retailers manage stock using bolts as units.
- Industrial Fabrics: Suppliers of canvas, vinyl, and other industrial textiles often sell material by the bolt.
It is generally not used for retail sales to consumers, where fabric is typically measured and cut to specific lengths (yards or meters) from the bolt.
Frequently Asked Questions
Questions About Finger (finger)
How long is a Finger?
The length of a finger was not consistently defined. The two most common historical definitions in England were:
- 4.5 inches (11.43 cm), equal to 1/8th of a yard.
- 2.25 inches (5.715 cm), equal to 1/16th of a yard (and identical to the unit called a 'nail'). Context is essential when encountering this unit in historical texts.
Is a Finger the same as a Digit?
No. Although both terms relate to the human finger, they represented different historical units of length.
- The Digit (or fingerbreadth) was typically much shorter, around 0.75 inches (approx. 1.9 cm), representing the width of a finger.
- The Finger was significantly longer, either 4.5 inches or 2.25 inches, likely derived as a fraction of a yard rather than directly from finger anatomy in later usage.
What is the relationship between a Finger and a Nail?
The unit called a Nail was commonly defined as 1/16th of a yard (2.25 inches). Therefore:
- One definition of the Finger (2.25 inches) was identical to the Nail.
- The other common definition of the Finger (4.5 inches) was twice the length of a Nail.
Is the Finger an SI unit?
No, the finger is not an SI unit. It is an archaic, non-standardized unit primarily used historically in England. The SI base unit for length is the meter (m).
Is the Finger still used?
No, the finger as a unit of length is completely obsolete and is not used in any modern standard, scientific, or commercial measurements. Its relevance is purely historical.
Where does the name 'Finger' come from?
The name undoubtedly originates from the human finger. However, while the digit unit directly related to finger width, the 'Finger' unit (especially the 4.5-inch version) seems to have become a conventional term for a specific fraction (1/8th or 1/16th) of a yard, particularly in cloth measurement, losing its direct anatomical connection.
About Bolt (bolt)
How long is a bolt of cloth?
There is no single standard length. It depends heavily on the fabric type and manufacturer. Common lengths include:
- 40 yards (~36.58 m)
- 100 yards (~91.44 m)
- Other lengths like 30, 50, 60, or 120 yards are also possible. Always check the specific product information for the actual length of a particular bolt.
How many yards are in a bolt?
Commonly 40 yards or 100 yards, but this is highly variable.
How many meters are in a bolt?
Based on common yard lengths:
- A 40-yard bolt is approximately 36.58 meters.
- A 100-yard bolt is approximately 91.44 meters.
Is the bolt a standardized unit?
No, it is not a standardized unit of length like the yard or meter. It's a commercial trade unit whose length varies.
Is the bolt still used today?
Yes, the term "bolt" is still widely used in the wholesale textile industry and manufacturing contexts to refer to a full roll of fabric, although the precise length is usually specified in yards or meters.
Is this related to the fastener "bolt"?
No, the bolt unit for cloth is completely unrelated to the metal fastener known as a bolt. They share the same name but have entirely different meanings and origins.
Conversion Table: Finger to Bolt
| Finger (finger) | Bolt (bolt) |
|---|---|
| 1 | 0.004 |
| 5 | 0.019 |
| 10 | 0.038 |
| 25 | 0.094 |
| 50 | 0.188 |
| 100 | 0.375 |
| 500 | 1.875 |
| 1,000 | 3.75 |
All Length Conversions
Other Units from Length
- Meter (m)
- Kilometer (km)
- Hectometer (hm)
- Decimeter (dm)
- Centimeter (cm)
- Millimeter (mm)
- Inch (in)
- Foot (ft)
- Yard (yd)
- Mile (mi)
- Nautical Mile (NM)
- Micrometer (μm)
- Nanometer (nm)
- Light Year (ly)
- Astronomical Unit (AU)
- Parsec (pc)
- Angstrom (Å)
- Point (Typography) (pt)
- Mil/Thou (mil)
- Fathom (fath)
- Furlong (fur)
- Link (Gunter's) (li)
- Pace (pace)
- Span (span)
- Digit (digit)
- Cable Length (cb)
- Ell (ell)
- Roman Mile (m.p.)
- Stadion (stadion)
- Chi (Chinese) (chi)
- Shaku (Japanese) (shaku)
- Li (Chinese) (li)
- Toise (toise)
- Rope (rope)
- Smoot (smoot)
- Sajene (sajene)
- Ken (ken)
- Wa (wa)
- Vara (vara)
- Aln (aln)
- Cubit (Royal/Egyptian) (cubit)
- Versta (versta)
- Arpent (arpent)
- Ri (Japanese) (ri)
- Klafter (klafter)
- Yojana (yojana)
- Skein (skein)