Finger to Cable Length Conversion Calculator: Free Online Tool
Convert fingers to cable lengths with our free online length converter.
Finger to Cable Length Calculator
How to Use the Calculator:
- Enter the value you want to convert in the 'From' field (Finger).
- The converted value in Cable Length will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Finger to Cable Length
Converting Finger to Cable Length involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Finger = 0.000617171 cable lengthsExample Calculation:
Convert 10 fingers: 10 × 0.000617171 = 0.00617171 cable lengths
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
What is a Finger and a Cable Length?
The Finger (sometimes finger's breadth, though this can be confusingly similar to the 'digit') is an archaic English unit of length. Its definition was inconsistent, leading to significant ambiguity. Two primary definitions existed:
-
As 1/8th of a yard: This was a common definition, equating the finger to:
- 4.5 inches (in)
- 1/2 of a quarter-yard (or "quarter")
- 0.1143 meters (m)
- 11.43 centimeters (cm)
-
As 1/16th of a yard: This definition made the finger identical to another unit called the nail, equating it to:
- 2.25 inches (in)
- 0.05715 meters (m)
- 5.715 centimeters (cm)
The term likely originated from anthropomorphic measurement but became tied to fractions of the standard yard, particularly in the context of measuring cloth. It is distinct from, and generally longer than, the unit called a digit (typically ~0.75 inches).
A Cable Length (symbol cb), often shortened to cable, is a nautical unit of length, traditionally related to the length of a ship's anchor cable. While its exact length has varied historically and geographically, it is now most commonly defined internationally as one-tenth of a nautical mile (1/10 NM).
This standard definition equates to:
- 185.2 meters (m)
- Approximately 607.61 feet (ft)
- Approximately 202.54 yards (yd)
Other historical definitions based on the fathom also exist.
Note: The Finger is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Cable Length belongs to the imperial/US customary system.
History of the Finger and Cable Length
The finger was used historically in England, primarily from the medieval period into the early modern era. Its main application was in the measurement of cloth, alongside other specialized units like the nail (often 2.25 inches) and the ell (often 45 inches).
The existence of multiple definitions (4.5 inches vs. 2.25 inches) highlights the lack of strict standardization for many older units. The 2.25-inch finger was identical to the nail, suggesting the terms might have been used interchangeably in some contexts or that one definition arose from confusion with the other.
Compared to more fundamental units like the inch, foot, yard, or even the digit and palm, the "finger" as a distinct unit (especially the 4.5-inch version) appears less frequently in historical records. Its usage declined significantly with the standardization of the Imperial system (which favored inches and yards) and the later adoption of the metric system. It is now entirely obsolete.
The unit originated from the practical length of a ship's anchor cable (or "shot" of chain) used in the age of sail. Anchor cables were typically manufactured in standard lengths that could be shackled together. This length provided a convenient unit for measuring distances related to anchoring and maneuvering close to shore or other vessels.
However, the length was not universally standardized:
- In the British Royal Navy, a cable was traditionally defined as 100 fathoms (equivalent to 600 feet or 182.88 meters).
- In the U.S. Navy, it was often defined as 120 fathoms (equivalent to 720 feet or 219.456 meters).
With the international adoption of the nautical mile (defined as 1852 meters), defining the cable as exactly one-tenth of this value (185.2 m) created a convenient, decimal-based relationship and became the most common modern standard, sometimes referred to as the "international cable length".
Common Uses for fingers and cable lengths
Explore the typical applications for both Finger (imperial/US) and Cable Length (imperial/US) to understand their common contexts.
Common Uses for fingers
The finger is obsolete and has no modern practical application. Its relevance is primarily historical:
- Historical Cloth Trade: Measurements in "fingers" might be encountered in older English documents, inventories, or tailor's records related to textiles. Understanding its potential ambiguity (4.5 vs 2.25 inches) is crucial.
- Understanding Historical Units: Studying the finger helps illustrate the complexity and variability of pre-standardized measurement systems and the specific units used in the textile industry.
- Rare & Obsolete: It was never as widespread or consistently defined as units like the inch, foot, or yard.
Common Uses for cable lengths
The cable length, particularly the 1/10 NM definition, remains in use in specific maritime contexts:
- Nautical Navigation & Ship Handling: Measuring short distances at sea, such as the distance between ships in formation, distance off a navigational hazard, distance to a pier, estimating anchor drag, or describing the scope (length) of anchor cable paid out.
- Hydrographic Surveying: Historically used on nautical charts, although meters are now the primary international standard for depth and short distances on modern charts.
- Naval Terminology: Persists in naval traditions and communications for describing close ranges.
- Historical Context: Encountered in older maritime texts, logs, charts, and naval records.
Frequently Asked Questions
Questions About Finger (finger)
How long is a Finger?
The length of a finger was not consistently defined. The two most common historical definitions in England were:
- 4.5 inches (11.43 cm), equal to 1/8th of a yard.
- 2.25 inches (5.715 cm), equal to 1/16th of a yard (and identical to the unit called a 'nail'). Context is essential when encountering this unit in historical texts.
Is a Finger the same as a Digit?
No. Although both terms relate to the human finger, they represented different historical units of length.
- The Digit (or fingerbreadth) was typically much shorter, around 0.75 inches (approx. 1.9 cm), representing the width of a finger.
- The Finger was significantly longer, either 4.5 inches or 2.25 inches, likely derived as a fraction of a yard rather than directly from finger anatomy in later usage.
What is the relationship between a Finger and a Nail?
The unit called a Nail was commonly defined as 1/16th of a yard (2.25 inches). Therefore:
- One definition of the Finger (2.25 inches) was identical to the Nail.
- The other common definition of the Finger (4.5 inches) was twice the length of a Nail.
Is the Finger an SI unit?
No, the finger is not an SI unit. It is an archaic, non-standardized unit primarily used historically in England. The SI base unit for length is the meter (m).
Is the Finger still used?
No, the finger as a unit of length is completely obsolete and is not used in any modern standard, scientific, or commercial measurements. Its relevance is purely historical.
Where does the name 'Finger' come from?
The name undoubtedly originates from the human finger. However, while the digit unit directly related to finger width, the 'Finger' unit (especially the 4.5-inch version) seems to have become a conventional term for a specific fraction (1/8th or 1/16th) of a yard, particularly in cloth measurement, losing its direct anatomical connection.
About Cable Length (cb)
What are the different values for a cable length?
The value depends on the definition being used:
- International Standard: 1 cable = 1/10 nautical mile = 185.2 meters ≈ 607.61 feet. (Most common modern definition)
- British Traditional: 1 cable = 100 fathoms = 182.88 meters = 600 feet.
- US Traditional: 1 cable = 120 fathoms = 219.456 meters = 720 feet.
Always clarify which definition is intended if precision is critical, though the 1/10 NM version is generally assumed today unless otherwise specified.
How many meters are in a standard cable length?
The internationally recognized standard cable length is exactly 185.2 meters.
How many feet are in a standard cable length?
The internationally recognized standard cable length is approximately 607.61 feet. The traditional British cable was 600 ft, and the traditional US cable was 720 ft.
Is the cable length related to the nautical mile?
Yes, the most common modern definition establishes a direct relationship: 1 cable length = 1/10 nautical mile.
Is the cable length an SI unit?
No, the cable length is not an SI unit. It is a traditional nautical unit derived from maritime practice and later linked to the nautical mile. The corresponding SI unit for length is the meter (m).
Is the cable length still used today?
Yes, while meters and nautical miles are standard for most navigation, the cable length (especially the 1/10 NM definition) is still actively used in specific maritime applications like anchoring, close maneuvering, naval operations, and sometimes in recreational boating contexts. It serves as a convenient subdivision of the nautical mile.
Conversion Table: Finger to Cable Length
| Finger (finger) | Cable Length (cb) |
|---|---|
| 1 | 0.001 |
| 5 | 0.003 |
| 10 | 0.006 |
| 25 | 0.015 |
| 50 | 0.031 |
| 100 | 0.062 |
| 500 | 0.309 |
| 1,000 | 0.617 |
All Length Conversions
Other Units from Length
- Meter (m)
- Kilometer (km)
- Hectometer (hm)
- Decimeter (dm)
- Centimeter (cm)
- Millimeter (mm)
- Inch (in)
- Foot (ft)
- Yard (yd)
- Mile (mi)
- Nautical Mile (NM)
- Micrometer (μm)
- Nanometer (nm)
- Light Year (ly)
- Astronomical Unit (AU)
- Parsec (pc)
- Angstrom (Å)
- Point (Typography) (pt)
- Mil/Thou (mil)
- Fathom (fath)
- Furlong (fur)
- Link (Gunter's) (li)
- Pace (pace)
- Span (span)
- Digit (digit)
- Ell (ell)
- Roman Mile (m.p.)
- Stadion (stadion)
- Chi (Chinese) (chi)
- Shaku (Japanese) (shaku)
- Li (Chinese) (li)
- Toise (toise)
- Bolt (bolt)
- Rope (rope)
- Smoot (smoot)
- Sajene (sajene)
- Ken (ken)
- Wa (wa)
- Vara (vara)
- Aln (aln)
- Cubit (Royal/Egyptian) (cubit)
- Versta (versta)
- Arpent (arpent)
- Ri (Japanese) (ri)
- Klafter (klafter)
- Yojana (yojana)
- Skein (skein)