Finger to Li (Chinese) Conversion Calculator: Free Online Tool

Convert fingers to li with our free online length converter.

Finger to Li (Chinese) Calculator

Finger
Li (Chinese)

How to Use the Calculator:

  1. Enter the value you want to convert in the 'From' field (Finger).
  2. The converted value in Li (Chinese) will appear automatically in the 'To' field.
  3. Use the dropdown menus to select different units within the Length category.
  4. Click the swap button (⇌) to reverse the conversion direction.

How to Convert Finger to Li (Chinese)

Converting Finger to Li (Chinese) involves multiplying the value by a specific conversion factor, as shown in the formula below.

Formula:

1 Finger = 0.0002286 li

Example Calculation:

Convert 10 fingers: 10 × 0.0002286 = 0.002286 li

Disclaimer: For Reference Only

These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.

Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.

What is a Finger and a Li (Chinese)?

The Finger (sometimes finger's breadth, though this can be confusingly similar to the 'digit') is an archaic English unit of length. Its definition was inconsistent, leading to significant ambiguity. Two primary definitions existed:

  1. As 1/8th of a yard: This was a common definition, equating the finger to:

    • 4.5 inches (in)
    • 1/2 of a quarter-yard (or "quarter")
    • 0.1143 meters (m)
    • 11.43 centimeters (cm)
  2. As 1/16th of a yard: This definition made the finger identical to another unit called the nail, equating it to:

    • 2.25 inches (in)
    • 0.05715 meters (m)
    • 5.715 centimeters (cm)

The term likely originated from anthropomorphic measurement but became tied to fractions of the standard yard, particularly in the context of measuring cloth. It is distinct from, and generally longer than, the unit called a digit (typically ~0.75 inches).

The Li (里) is a traditional Chinese unit of distance, often translated as the "Chinese mile". It represents a significantly longer distance than the Chi (Chinese foot) and was historically the primary unit for measuring travel distances and land divisions over large areas.

Traditionally, the Li was defined in relation to smaller units like the Bu (步 - pace) or the Zhang (丈), and ultimately the Chi (尺). Common historical relationships included:

  • 1 Li = 300 or 360 Bu
  • 1 Bu = 5 or 6 Chi
  • Therefore, 1 Li could equal 1500 or 1800 Chi.
  • Alternatively, 1 Li = 150 Zhang (since 1 Zhang = 10 Chi).

Like other traditional Chinese units, its exact length varied considerably across different dynasties and regions. The modern standardized value, adopted for convenience and integration with the metric system, defines the Li as exactly 500 meters (0.5 kilometers).

Note: The Finger is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Li (Chinese) belongs to the imperial/US customary system.

History of the Finger and Li (Chinese)

The finger was used historically in England, primarily from the medieval period into the early modern era. Its main application was in the measurement of cloth, alongside other specialized units like the nail (often 2.25 inches) and the ell (often 45 inches).

The existence of multiple definitions (4.5 inches vs. 2.25 inches) highlights the lack of strict standardization for many older units. The 2.25-inch finger was identical to the nail, suggesting the terms might have been used interchangeably in some contexts or that one definition arose from confusion with the other.

Compared to more fundamental units like the inch, foot, yard, or even the digit and palm, the "finger" as a distinct unit (especially the 4.5-inch version) appears less frequently in historical records. Its usage declined significantly with the standardization of the Imperial system (which favored inches and yards) and the later adoption of the metric system. It is now entirely obsolete.

The Li has been a fundamental unit of distance in China for thousands of years, used since at least the Zhou Dynasty (c. 1046–256 BC). Its length was not constant, often changing with administrative reforms or shifts in the standard length of the base unit, the Chi.

  • Early Dynasties: The length fluctuated. For example, during the Han Dynasty, based on a Chi of ~23.1 cm and a definition of 1 Li = 300 Bu = 1800 Chi, the Li would have been approximately 415.8 meters. Other periods might have used different definitions or Chi lengths, leading to Li values ranging roughly from 300 to over 500 meters.
  • Standardization Efforts: Various dynasties attempted to standardize measurements, but regional variations often persisted. The Li was crucial for imperial administration, defining tax districts, postal routes, and military logistics.
  • 20th Century Standardization: Following the establishment of the Republic of China, efforts were made to align traditional units with the metric system. In 1929, alongside the standardization of the Chi as 1/3 meter, the Li was officially defined as 1500 Chi, which resulted in exactly 500 meters (0.5 kilometers). This standard was maintained by the People's Republic of China.

The Li's historical significance lies in its role as the standard measure for long distances, shaping perceptions of geography and travel within China and neighboring East Asian cultures influenced by the Chinese system.

Common Uses for fingers and li

Explore the typical applications for both Finger (imperial/US) and Li (Chinese) (imperial/US) to understand their common contexts.

Common Uses for fingers

The finger is obsolete and has no modern practical application. Its relevance is primarily historical:

  • Historical Cloth Trade: Measurements in "fingers" might be encountered in older English documents, inventories, or tailor's records related to textiles. Understanding its potential ambiguity (4.5 vs 2.25 inches) is crucial.
  • Understanding Historical Units: Studying the finger helps illustrate the complexity and variability of pre-standardized measurement systems and the specific units used in the textile industry.
  • Rare & Obsolete: It was never as widespread or consistently defined as units like the inch, foot, or yard.

Common Uses for li

While officially replaced by the kilometer for most purposes, the Li retains significance:

  • Historical Measurement: Essential for understanding distances mentioned in historical texts, maps, administrative records, travelogues, and descriptions of large-scale projects like the Great Wall or canal systems.
  • Geographical Names: Many place names in China incorporate "Li" (e.g., 十里堡 - Shilibao, "Ten Li Fort"), often reflecting historical distances or significance, even if the modern distance doesn't match precisely.
  • Cultural References: The Li features prominently in Chinese idioms, proverbs, literature, and poetry, often symbolizing long journeys or vast distances. A famous example is 千里之行,始於足下 (qiān lǐ zhī xíng, shǐ yú zú xià - "A journey of a thousand li begins with a single step").
  • Informal Usage: In some rural areas or among older generations, "Li" might still be used informally to refer to a distance of approximately half a kilometer. It can also be used colloquially as a direct synonym for 0.5 km.
  • Mapping: Older maps and surveys frequently used the Li.

Frequently Asked Questions

Questions About Finger (finger)

How long is a Finger?

The length of a finger was not consistently defined. The two most common historical definitions in England were:

  • 4.5 inches (11.43 cm), equal to 1/8th of a yard.
  • 2.25 inches (5.715 cm), equal to 1/16th of a yard (and identical to the unit called a 'nail'). Context is essential when encountering this unit in historical texts.

Is a Finger the same as a Digit?

No. Although both terms relate to the human finger, they represented different historical units of length.

  • The Digit (or fingerbreadth) was typically much shorter, around 0.75 inches (approx. 1.9 cm), representing the width of a finger.
  • The Finger was significantly longer, either 4.5 inches or 2.25 inches, likely derived as a fraction of a yard rather than directly from finger anatomy in later usage.

What is the relationship between a Finger and a Nail?

The unit called a Nail was commonly defined as 1/16th of a yard (2.25 inches). Therefore:

  • One definition of the Finger (2.25 inches) was identical to the Nail.
  • The other common definition of the Finger (4.5 inches) was twice the length of a Nail.

Is the Finger an SI unit?

No, the finger is not an SI unit. It is an archaic, non-standardized unit primarily used historically in England. The SI base unit for length is the meter (m).

Is the Finger still used?

No, the finger as a unit of length is completely obsolete and is not used in any modern standard, scientific, or commercial measurements. Its relevance is purely historical.

Where does the name 'Finger' come from?

The name undoubtedly originates from the human finger. However, while the digit unit directly related to finger width, the 'Finger' unit (especially the 4.5-inch version) seems to have become a conventional term for a specific fraction (1/8th or 1/16th) of a yard, particularly in cloth measurement, losing its direct anatomical connection.

About Li (Chinese) (li)

How long is a Li?

The length of the Li varied significantly throughout history, typically ranging from about 400 to over 500 meters. The modern standardized value (since 1929) is:

  • Exactly 500 meters (m)
  • Exactly 0.5 kilometers (km)
  • Approximately 0.3107 miles (mi)
  • Approximately 1640.42 feet (ft)
  • Approximately 546.81 yards (yd)

How was the Li historically defined?

It was typically defined based on smaller units:

  • 1 Li = 300 or 360 Bu (步 - paces)
  • Since 1 Bu was often 5 or 6 Chi (尺 - Chinese feet), this meant *1 Li = 1500 or 1800 Chi.
  • Alternatively, 1 Li = 150 Zhang (丈), where 1 Zhang = 10 Chi. The variation depended on the specific dynasty, region, and the prevailing standard length of the Chi.

How does the Li relate to the Kilometer?

The modern standardized Li is defined directly in relation to the kilometer:

  • 1 Li = 0.5 Kilometers
  • 1 Kilometer = 2 Li

Is the Li an SI unit?

No, the Li is not an SI unit. It is a traditional Chinese unit of distance. The SI base unit for length is the meter (m), and the commonly used unit for larger distances is the kilometer (km).

Is the Li still used today?

Officially, China uses the metric system (kilometers and meters) for all legal, commercial, scientific, and administrative purposes. However, the Li continues to be used in:

  • Historical and cultural contexts.
  • Geographical place names.
  • Idioms and literature.
  • Informal conversation, often meaning exactly 0.5 km.

Is this related to the surveying Link (li)?

No, they are completely different and unrelated units, despite the similar symbol in some contexts.

  • The Chinese Li (里) is a traditional unit of distance, standardized at 500 meters.
  • The Gunter's Link (li) is a historical surveying unit from the imperial system, equal to 0.201168 meters (or 7.92 inches).

Conversion Table: Finger to Li (Chinese)

Finger (finger)Li (Chinese) (li)
10
50.001
100.002
250.006
500.011
1000.023
5000.114
1,0000.229

All Length Conversions

Meter to KilometerMeter to HectometerMeter to DecimeterMeter to CentimeterMeter to MillimeterMeter to InchMeter to FootMeter to YardMeter to MileMeter to Nautical MileMeter to MicrometerMeter to NanometerMeter to Light YearMeter to Astronomical UnitMeter to ParsecMeter to AngstromMeter to Point (Typography)Meter to Mil/ThouMeter to FathomMeter to FurlongMeter to Link (Gunter's)Meter to PaceMeter to SpanMeter to DigitMeter to Cable LengthMeter to EllMeter to FingerMeter to Roman MileMeter to StadionMeter to Chi (Chinese)Meter to Shaku (Japanese)Meter to Li (Chinese)Meter to ToiseMeter to BoltMeter to RopeMeter to SmootMeter to SajeneMeter to KenMeter to WaMeter to VaraMeter to AlnMeter to Cubit (Royal/Egyptian)Meter to VerstaMeter to ArpentMeter to Ri (Japanese)Meter to KlafterMeter to YojanaMeter to SkeinKilometer to MeterKilometer to HectometerKilometer to DecimeterKilometer to CentimeterKilometer to MillimeterKilometer to InchKilometer to FootKilometer to YardKilometer to MileKilometer to Nautical MileKilometer to MicrometerKilometer to NanometerKilometer to Light YearKilometer to Astronomical UnitKilometer to ParsecKilometer to AngstromKilometer to Point (Typography)Kilometer to Mil/ThouKilometer to FathomKilometer to FurlongKilometer to Link (Gunter's)Kilometer to PaceKilometer to SpanKilometer to DigitKilometer to Cable LengthKilometer to EllKilometer to FingerKilometer to Roman MileKilometer to StadionKilometer to Chi (Chinese)Kilometer to Shaku (Japanese)Kilometer to Li (Chinese)Kilometer to ToiseKilometer to BoltKilometer to RopeKilometer to SmootKilometer to SajeneKilometer to KenKilometer to WaKilometer to VaraKilometer to AlnKilometer to Cubit (Royal/Egyptian)Kilometer to VerstaKilometer to ArpentKilometer to Ri (Japanese)Kilometer to KlafterKilometer to YojanaKilometer to SkeinHectometer to MeterHectometer to KilometerHectometer to DecimeterHectometer to CentimeterHectometer to MillimeterHectometer to InchHectometer to FootHectometer to YardHectometer to MileHectometer to Nautical MileHectometer to MicrometerHectometer to NanometerHectometer to Light YearHectometer to Astronomical UnitHectometer to ParsecHectometer to AngstromHectometer to Point (Typography)Hectometer to Mil/ThouHectometer to FathomHectometer to FurlongHectometer to Link (Gunter's)Hectometer to PaceHectometer to SpanHectometer to Digit