Klafter to Bolt Converter
Convert klafter to bolts with our free online length converter.
Quick Answer
1 Klafter = 0.062221 bolts
Formula: Klafter × conversion factor = Bolt
Use the calculator below for instant, accurate conversions.
Our Accuracy Guarantee
All conversion formulas on UnitsConverter.io have been verified against NIST (National Institute of Standards and Technology) guidelines and international SI standards. Our calculations are accurate to 10 decimal places for standard conversions and use arbitrary precision arithmetic for astronomical units.
Klafter to Bolt Calculator
How to Use the Klafter to Bolt Calculator:
- Enter the value you want to convert in the 'From' field (Klafter).
- The converted value in Bolt will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Klafter to Bolt: Step-by-Step Guide
Converting Klafter to Bolt involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Klafter = 0.0622211 boltsExample Calculation:
Convert 10 klafter: 10 × 0.0622211 = 0.622211 bolts
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
Need to convert to other length units?
View all Length conversions →What is a Klafter and a Bolt?
The Klafter is a historical unit of length originating from Central Europe, particularly prominent in German-speaking regions like Austria, Bavaria, Prussia, and Switzerland. It is conceptually similar to the fathom, often defined by the span of a person's outstretched arms.
While its exact length varied significantly by region and time, a widely recognized standard, especially from the Austrian Empire, defines the Klafter as 6 Vienna feet (Wiener Fuß). This equates to approximately:
- 1.8965 meters (m)
- 6.222 feet (ft) (using the Vienna foot of ~0.31608 m)
The Klafter was also used as a unit of area (Quadratklafter or square Klafter) and volume (Kubikklafter or cubic Klafter), especially for measuring firewood (often called a Raummeter or Ster in this context, though volumes could vary). This page focuses on the linear Klafter.
A Bolt is a commercial unit of length primarily used for measuring rolls of cloth or fabric. Unlike standardized units like the meter or yard, the length of a bolt is not fixed and can vary significantly depending on the type of material, the manufacturer, the country of origin, and trade customs.
Common lengths often associated with a bolt include:
- 40 yards (approximately 36.58 meters) - Frequently cited, especially for cottons and silks in the US.
- 100 yards (approximately 91.44 meters) - Often used for heavier fabrics like canvas.
- Other lengths such as 30, 50, 60, or 120 yards may also be encountered.
The bolt represents a quantity convenient for wholesale trade, manufacturing, and inventory management rather than a precise scientific measurement.
Note: The Klafter is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Bolt belongs to the imperial/US customary system.
History of the Klafter and Bolt
The term "Klafter" likely derives from Old High German klāftra, related to the act of embracing or grasping, reflecting its origin as an anthropometric unit based on arm span.
- Regional Variations: Before widespread standardization and metrication, the length of the Klafter differed across various German states and Swiss cantons. For example, the Prussian Klafter was slightly different from the Austrian one.
- Standardization Efforts: Attempts were made to standardize measures, with the Austrian system (based on the Wiener Fuß) becoming influential. The definition of 1 Klafter = 6 Fuß (feet) = 72 Zoll (inches) was common, but the length of the Fuß itself varied.
- Dual Use (Length & Volume): The Klafter was notably used for measuring stacked firewood. A Klafter Holz typically referred to a stack of wood 1 Klafter high, 1 Klafter wide, and a specific log length (often 3 or 4 feet), representing a volume unit.
- Metrication: The Klafter became obsolete following the adoption of the metric system across Central Europe, primarily during the latter half of the 19th century (e.g., Germany 1872, Austria 1876).
The concept of the bolt emerged from the practical needs of the textile industry. As cloth production scaled up, manufacturers and merchants needed a standardized way to handle, store, and trade large quantities of fabric. Winding cloth onto a roll or board (the "bolt") provided a convenient package.
The length associated with a bolt likely developed through trade customs specific to different types of fabric and regions. There was never a universal legal standard defining its length, leading to the wide variations seen historically and currently. While retail sales shifted towards measurement by the yard or meter, the bolt remained a useful unit in wholesale and industrial contexts. Even with the global adoption of the metric system, the term "bolt" persists in the textile trade as a reference to a full roll of fabric, though the exact length is usually specified separately in yards or meters.
Common Uses and Applications: klafter vs bolts
Explore the typical applications for both Klafter (imperial/US) and Bolt (imperial/US) to understand their common contexts.
Common Uses for klafter
Historically, the Klafter served various measurement needs:
- Forestry: Measuring timber lengths and, crucially, the volume of stacked firewood.
- Mining: Measuring the depth of shafts and the length of tunnels.
- Construction: Measuring building dimensions, rope lengths, and materials.
- Surveying: Measuring land distances and areas (Quadratklafter), although units like the Ruthe (rod) were also common for land.
- Nautical: Sometimes used similarly to a fathom for measuring water depth or rope lengths, though less common than the English fathom in maritime contexts.
Today, its use is confined to historical records, architectural studies, forestry history, and understanding old land deeds or documents.
When to Use bolts
The bolt is almost exclusively used within the textile industry:
- Wholesale Trade: Fabric manufacturers sell cloth to distributors or large buyers in bolts.
- Manufacturing: Clothing and upholstery manufacturers purchase fabric by the bolt for production runs.
- Inventory Management: Textile mills, warehouses, and large retailers manage stock using bolts as units.
- Industrial Fabrics: Suppliers of canvas, vinyl, and other industrial textiles often sell material by the bolt.
It is generally not used for retail sales to consumers, where fabric is typically measured and cut to specific lengths (yards or meters) from the bolt.
Additional Unit Information
About Klafter (klafter)
How long is a Klafter?
The length varied, but the most common standard, based on the Austrian system, is:
- Exactly 6 Vienna Feet (Wiener Fuß)
- Approximately 1.8965 meters
- Approximately 6.222 feet
Other historical values might range roughly from 1.7 to 1.95 meters depending on the specific regional "foot" standard used.
Is a Klafter the same as a fathom?
Conceptually, they are very similar, both derived from the span of outstretched arms. Numerically, they are close but distinct.
- Klafter (Austrian): ~1.8965 meters / ~6.222 feet
- Fathom (International): Exactly 1.8288 meters / 6 feet
So, the common Austrian Klafter was slightly longer than the standard fathom.
What were the main related units in the Austrian system?
The Klafter was part of a system:
- 1 Klafter = 6 Fuß (Vienna Foot or Wiener Schuh)
- 1 Fuß = 12 Zoll (Vienna Inch or Wiener Zoll)
- 1 Zoll ≈ 2.634 cm / 1.037 inches
- 1 Fuß ≈ 31.608 cm / 12.444 inches / 1.037 feet
Where was the Klafter primarily used?
It was used across Central Europe, notably in:
- Austria-Hungary
- Southern German states (Bavaria, Württemberg)
- Prussia (with a slightly different length)
- Switzerland
- Other parts of the Holy Roman Empire and subsequent German Confederation.
Is the Klafter still used today?
No, the Klafter is obsolete for practical measurements. It was replaced by the meter during metrication in the 19th century. Its relevance is purely historical.
How does a Klafter compare to a meter or foot?
- A Klafter (~1.9 m) is almost twice as long as a meter. (1 Klafter ≈ 1.9 m)
- A Klafter (~6.2 ft) is significantly longer than a standard foot. (1 Klafter ≈ 6.2 ft)
Is the Klafter an SI unit?
No, the Klafter is not an SI unit. It is a traditional unit from historical Central European measurement systems. The SI base unit for length is the meter (m).
About Bolt (bolt)
How long is a bolt of cloth?
There is no single standard length. It depends heavily on the fabric type and manufacturer. Common lengths include:
- 40 yards (~36.58 m)
- 100 yards (~91.44 m)
- Other lengths like 30, 50, 60, or 120 yards are also possible. Always check the specific product information for the actual length of a particular bolt.
How many yards are in a bolt?
Commonly 40 yards or 100 yards, but this is highly variable.
How many meters are in a bolt?
Based on common yard lengths:
- A 40-yard bolt is approximately 36.58 meters.
- A 100-yard bolt is approximately 91.44 meters.
Is the bolt a standardized unit?
No, it is not a standardized unit of length like the yard or meter. It's a commercial trade unit whose length varies.
Is the bolt still used today?
Yes, the term "bolt" is still widely used in the wholesale textile industry and manufacturing contexts to refer to a full roll of fabric, although the precise length is usually specified in yards or meters.
Is this related to the fastener "bolt"?
No, the bolt unit for cloth is completely unrelated to the metal fastener known as a bolt. They share the same name but have entirely different meanings and origins.
Conversion Table: Klafter to Bolt
| Klafter (klafter) | Bolt (bolt) |
|---|---|
| 0.5 | 0.031 |
| 1 | 0.062 |
| 1.5 | 0.093 |
| 2 | 0.124 |
| 5 | 0.311 |
| 10 | 0.622 |
| 25 | 1.556 |
| 50 | 3.111 |
| 100 | 6.222 |
| 250 | 15.555 |
| 500 | 31.111 |
| 1,000 | 62.221 |
People Also Ask
How do I convert Klafter to Bolt?
To convert Klafter to Bolt, enter the value in Klafter in the calculator above. The conversion will happen automatically. Use our free online converter for instant and accurate results. You can also visit our length converter page to convert between other units in this category.
Learn more →What is the conversion factor from Klafter to Bolt?
The conversion factor depends on the specific relationship between Klafter and Bolt. You can find the exact conversion formula and factor on this page. Our calculator handles all calculations automatically. See the conversion table above for common values.
Can I convert Bolt back to Klafter?
Yes! You can easily convert Bolt back to Klafter by using the swap button (⇌) in the calculator above, or by visiting our Bolt to Klafter converter page. You can also explore other length conversions on our category page.
Learn more →What are common uses for Klafter and Bolt?
Klafter and Bolt are both standard units used in length measurements. They are commonly used in various applications including engineering, construction, cooking, and scientific research. Browse our length converter for more conversion options.
For more length conversion questions, visit our FAQ page or explore our conversion guides.
Helpful Conversion Guides
Learn more about unit conversion with our comprehensive guides:
📚 How to Convert Units
Step-by-step guide to unit conversion with practical examples.
🔢 Conversion Formulas
Essential formulas for length and other conversions.
⚖️ Metric vs Imperial
Understand the differences between measurement systems.
⚠️ Common Mistakes
Learn about frequent errors and how to avoid them.
All Length Conversions
Other Length Units and Conversions
Explore other length units and their conversion options:
- Meter (m) • Klafter to Meter
- Kilometer (km) • Klafter to Kilometer
- Hectometer (hm) • Klafter to Hectometer
- Decimeter (dm) • Klafter to Decimeter
- Centimeter (cm) • Klafter to Centimeter
- Millimeter (mm) • Klafter to Millimeter
- Inch (in) • Klafter to Inch
- Foot (ft) • Klafter to Foot
- Yard (yd) • Klafter to Yard
- Mile (mi) • Klafter to Mile
Verified Against Authority Standards
All conversion formulas have been verified against international standards and authoritative sources to ensure maximum accuracy and reliability.
National Institute of Standards and Technology — Official US standards for length measurements
Bureau International des Poids et Mesures — International System of Units official documentation
Last verified: February 19, 2026