Klafter to Cubit (Royal/Egyptian) Conversion Calculator: Free Online Tool
Convert klafter to cubits with our free online length converter.
Klafter to Cubit (Royal/Egyptian) Calculator
How to Use the Calculator:
- Enter the value you want to convert in the 'From' field (Klafter).
- The converted value in Cubit (Royal/Egyptian) will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Klafter to Cubit (Royal/Egyptian)
Converting Klafter to Cubit (Royal/Egyptian) involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Klafter = 3.626195 cubitsExample Calculation:
Convert 10 klafter: 10 × 3.626195 = 36.26195 cubits
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
What is a Klafter and a Cubit (Royal/Egyptian)?
The Klafter is a historical unit of length originating from Central Europe, particularly prominent in German-speaking regions like Austria, Bavaria, Prussia, and Switzerland. It is conceptually similar to the fathom, often defined by the span of a person's outstretched arms.
While its exact length varied significantly by region and time, a widely recognized standard, especially from the Austrian Empire, defines the Klafter as 6 Vienna feet (Wiener Fuß). This equates to approximately:
- 1.8965 meters (m)
- 6.222 feet (ft) (using the Vienna foot of ~0.31608 m)
The Klafter was also used as a unit of area (Quadratklafter or square Klafter) and volume (Kubikklafter or cubic Klafter), especially for measuring firewood (often called a Raummeter or Ster in this context, though volumes could vary). This page focuses on the linear Klafter.
The Royal Cubit (Ancient Egyptian: meh nesut) was the primary ancient Egyptian standard unit of linear measure. It was based on the length of the forearm from the elbow to the tip of the extended middle finger, plus the width of the palm. It is considered one of the earliest attested standard units of measurement.
The Royal Cubit was typically divided into 7 palms (shesep), with each palm further divided into 4 digits or fingers (djeba), totaling 28 digits. Its length varied slightly over time and location but is generally accepted to be approximately 52.3 to 52.9 centimeters (about 20.6 to 20.8 inches). A common average value used is 0.524 meters.
A shorter Common Cubit or Short Cubit (Ancient Egyptian: meh sherer) also existed, measuring 6 palms (24 digits), approximately 45 cm.
Note: The Klafter is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Cubit (Royal/Egyptian) belongs to the imperial/US customary system.
History of the Klafter and Cubit (Royal/Egyptian)
The term "Klafter" likely derives from Old High German klāftra, related to the act of embracing or grasping, reflecting its origin as an anthropometric unit based on arm span.
- Regional Variations: Before widespread standardization and metrication, the length of the Klafter differed across various German states and Swiss cantons. For example, the Prussian Klafter was slightly different from the Austrian one.
- Standardization Efforts: Attempts were made to standardize measures, with the Austrian system (based on the Wiener Fuß) becoming influential. The definition of 1 Klafter = 6 Fuß (feet) = 72 Zoll (inches) was common, but the length of the Fuß itself varied.
- Dual Use (Length & Volume): The Klafter was notably used for measuring stacked firewood. A Klafter Holz typically referred to a stack of wood 1 Klafter high, 1 Klafter wide, and a specific log length (often 3 or 4 feet), representing a volume unit.
- Metrication: The Klafter became obsolete following the adoption of the metric system across Central Europe, primarily during the latter half of the 19th century (e.g., Germany 1872, Austria 1876).
The Royal Cubit emerged very early in Egyptian history, likely during the Predynastic or Early Dynastic Period (before 3000 BCE). Its standardization was crucial for the large-scale construction projects undertaken by the pharaohs.
- Early Standardization: It represents one of history's first successful attempts at creating and maintaining a standard unit of length, essential for architectural precision and administrative consistency.
- Cubit Rods: Physical standards, known as cubit rods, were created from durable materials like wood, slate, or granite. These rods were often inscribed with subdivisions (palms, digits, and sometimes fractions of digits) and sometimes bore dedications or official insignia. Examples have been found in tombs, such as that of Tutankhamun, and likely served as official benchmarks.
- Monumental Construction: The Royal Cubit was the fundamental unit used in the design and construction of temples, palaces, and most famously, the pyramids. The precise dimensions of structures like the Great Pyramid of Giza reflect careful measurement using this standard.
- Longevity: The Royal Cubit remained the standard measure in Egypt for millennia, from the Old Kingdom through the Ptolemaic period and into Roman times, demonstrating remarkable stability.
Common Uses for klafter and cubits
Explore the typical applications for both Klafter (imperial/US) and Cubit (Royal/Egyptian) (imperial/US) to understand their common contexts.
Common Uses for klafter
Historically, the Klafter served various measurement needs:
- Forestry: Measuring timber lengths and, crucially, the volume of stacked firewood.
- Mining: Measuring the depth of shafts and the length of tunnels.
- Construction: Measuring building dimensions, rope lengths, and materials.
- Surveying: Measuring land distances and areas (Quadratklafter), although units like the Ruthe (rod) were also common for land.
- Nautical: Sometimes used similarly to a fathom for measuring water depth or rope lengths, though less common than the English fathom in maritime contexts.
Today, its use is confined to historical records, architectural studies, forestry history, and understanding old land deeds or documents.
Common Uses for cubits
The Royal Cubit was integral to many aspects of ancient Egyptian society:
- Architecture and Construction: Defining building dimensions, column heights, room layouts, and overall structural proportions.
- Land Surveying: Measuring fields for agriculture, taxation, and property boundaries, especially after the annual Nile flood receded.
- Record Keeping: Used in administrative documents, inventories, and calculations.
- Craftsmanship: Measuring materials like stone blocks, timber, rope, and textiles.
- Art and Iconography: Used to establish proportions in statues and reliefs according to canonical rules.
- Religious and Funerary Contexts: Cubit rods were sometimes included in tomb equipment, possibly symbolizing order and correctness or serving a practical purpose in the afterlife.
- Historical Texts: The term "cubit" appears in various ancient texts, including the Bible, though the specific length intended (Egyptian Royal, common, Babylonian, etc.) can be context-dependent.
Frequently Asked Questions
Questions About Klafter (klafter)
How long is a Klafter?
The length varied, but the most common standard, based on the Austrian system, is:
- Exactly 6 Vienna Feet (Wiener Fuß)
- Approximately 1.8965 meters
- Approximately 6.222 feet
Other historical values might range roughly from 1.7 to 1.95 meters depending on the specific regional "foot" standard used.
Is a Klafter the same as a fathom?
Conceptually, they are very similar, both derived from the span of outstretched arms. Numerically, they are close but distinct.
- Klafter (Austrian): ~1.8965 meters / ~6.222 feet
- Fathom (International): Exactly 1.8288 meters / 6 feet
So, the common Austrian Klafter was slightly longer than the standard fathom.
What were the main related units in the Austrian system?
The Klafter was part of a system:
- 1 Klafter = 6 Fuß (Vienna Foot or Wiener Schuh)
- 1 Fuß = 12 Zoll (Vienna Inch or Wiener Zoll)
- 1 Zoll ≈ 2.634 cm / 1.037 inches
- 1 Fuß ≈ 31.608 cm / 12.444 inches / 1.037 feet
Where was the Klafter primarily used?
It was used across Central Europe, notably in:
- Austria-Hungary
- Southern German states (Bavaria, Württemberg)
- Prussia (with a slightly different length)
- Switzerland
- Other parts of the Holy Roman Empire and subsequent German Confederation.
Is the Klafter still used today?
No, the Klafter is obsolete for practical measurements. It was replaced by the meter during metrication in the 19th century. Its relevance is purely historical.
How does a Klafter compare to a meter or foot?
- A Klafter (~1.9 m) is almost twice as long as a meter. (1 Klafter ≈ 1.9 m)
- A Klafter (~6.2 ft) is significantly longer than a standard foot. (1 Klafter ≈ 6.2 ft)
Is the Klafter an SI unit?
No, the Klafter is not an SI unit. It is a traditional unit from historical Central European measurement systems. The SI base unit for length is the meter (m).
About Cubit (Royal/Egyptian) (cubit)
How was the Royal Cubit standardized?
Standardization was achieved through the creation and maintenance of master cubit rods. These physical exemplars, often made of durable stone like granite, were likely kept in major temples or administrative centers. Officials and craftsmen would use copies made from these masters for practical work. The rods themselves were meticulously marked with the primary divisions of 7 palms and 28 digits, often including finer subdivisions. This system ensured consistency across large projects and different regions of the kingdom.
What is the difference between a short cubit and a royal cubit?
The two main cubit measures in ancient Egypt were:
- Short Cubit (meh sherer): Measured 6 palms (24 digits), approximately 44.7 to 45 cm (around 17.6 inches). It represented the distance from the elbow to the tip of the thumb or closed fist. It was likely used for more common, everyday measurements of cloth, goods, or smaller objects.
- Royal Cubit (meh nesut): Measured 7 palms (28 digits), approximately 52.3 to 52.9 cm (around 20.6 inches). It was the length from the elbow to the tip of the middle finger plus one palm width. This was the official standard used for monumental architecture, land surveying, and significant state projects. It likely held a higher status and was associated with the pharaoh and divine order.
How long was the Royal Cubit?
The Royal Cubit was approximately:
- 0.523 to 0.529 meters (m)
- 52.3 to 52.9 centimeters (cm)
- 20.6 to 20.8 inches (in)
- Roughly 1.72 feet (ft)
A value of 0.524 m is often used as a representative average.
Is the Cubit still used today?
No, the ancient Egyptian Cubit (both Royal and short) is obsolete. It has not been in practical use for centuries, having been replaced by other measurement systems and ultimately by the metric system. Its relevance today is purely historical, archaeological, and academic.
Is the Cubit an SI unit?
No, the Cubit is not an SI unit. It is an ancient, traditional unit of measurement originating in Egypt. The SI base unit for length is the meter (m).
Conversion Table: Klafter to Cubit (Royal/Egyptian)
| Klafter (klafter) | Cubit (Royal/Egyptian) (cubit) |
|---|---|
| 1 | 3.626 |
| 5 | 18.131 |
| 10 | 36.262 |
| 25 | 90.655 |
| 50 | 181.31 |
| 100 | 362.62 |
| 500 | 1,813.098 |
| 1,000 | 3,626.195 |
All Length Conversions
Other Units from Length
- Meter (m)
- Kilometer (km)
- Hectometer (hm)
- Decimeter (dm)
- Centimeter (cm)
- Millimeter (mm)
- Inch (in)
- Foot (ft)
- Yard (yd)
- Mile (mi)
- Nautical Mile (NM)
- Micrometer (μm)
- Nanometer (nm)
- Light Year (ly)
- Astronomical Unit (AU)
- Parsec (pc)
- Angstrom (Å)
- Point (Typography) (pt)
- Mil/Thou (mil)
- Fathom (fath)
- Furlong (fur)
- Link (Gunter's) (li)
- Pace (pace)
- Span (span)
- Digit (digit)
- Cable Length (cb)
- Ell (ell)
- Finger (finger)
- Roman Mile (m.p.)
- Stadion (stadion)
- Chi (Chinese) (chi)
- Shaku (Japanese) (shaku)
- Li (Chinese) (li)
- Toise (toise)
- Bolt (bolt)
- Rope (rope)
- Smoot (smoot)
- Sajene (sajene)
- Ken (ken)
- Wa (wa)
- Vara (vara)
- Aln (aln)
- Versta (versta)
- Arpent (arpent)
- Ri (Japanese) (ri)
- Yojana (yojana)
- Skein (skein)