Li (Chinese) to Parsec Conversion Calculator: Free Online Tool
Convert li to parsecs with our free online length converter.
Li (Chinese) to Parsec Calculator
How to Use the Calculator:
- Enter the value you want to convert in the 'From' field (Li (Chinese)).
- The converted value in Parsec will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Li (Chinese) to Parsec
Converting Li (Chinese) to Parsec involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Li (Chinese) = 1.6204e-14 parsecs
Example Calculation:
Convert 10 li: 10 × 1.6204e-14 = 1.6204e-13 parsecs
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
What is a Li (Chinese) and a Parsec?
The Li (里) is a traditional Chinese unit of distance, often translated as the "Chinese mile". It represents a significantly longer distance than the Chi (Chinese foot) and was historically the primary unit for measuring travel distances and land divisions over large areas.
Traditionally, the Li was defined in relation to smaller units like the Bu (步 - pace) or the Zhang (丈), and ultimately the Chi (尺). Common historical relationships included:
- 1 Li = 300 or 360 Bu
- 1 Bu = 5 or 6 Chi
- Therefore, 1 Li could equal 1500 or 1800 Chi.
- Alternatively, 1 Li = 150 Zhang (since 1 Zhang = 10 Chi).
Like other traditional Chinese units, its exact length varied considerably across different dynasties and regions. The modern standardized value, adopted for convenience and integration with the metric system, defines the Li as exactly 500 meters (0.5 kilometers).
The Parsec (symbol pc) is a unit of length used to measure the enormous distances to astronomical objects outside the Solar System. One parsec is defined as the distance at which one astronomical unit (AU) – the average distance between the Earth and the Sun – subtends an angle of one arcsecond (1/3600th of a degree). This corresponds to approximately:
- 3.0857 × 10¹⁶ meters (m)
- 30.857 trillion kilometers (km)
- 19.174 trillion miles (mi)
- 206,264.8 astronomical units (AU)
- 3.26156 light-years (ly)
It is derived directly from the method of trigonometric parallax used by astronomers to measure stellar distances.
Note: The Li (Chinese) is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Parsec belongs to the imperial/US customary system.
History of the Li (Chinese) and Parsec
The Li has been a fundamental unit of distance in China for thousands of years, used since at least the Zhou Dynasty (c. 1046–256 BC). Its length was not constant, often changing with administrative reforms or shifts in the standard length of the base unit, the Chi.
- Early Dynasties: The length fluctuated. For example, during the Han Dynasty, based on a Chi of ~23.1 cm and a definition of 1 Li = 300 Bu = 1800 Chi, the Li would have been approximately 415.8 meters. Other periods might have used different definitions or Chi lengths, leading to Li values ranging roughly from 300 to over 500 meters.
- Standardization Efforts: Various dynasties attempted to standardize measurements, but regional variations often persisted. The Li was crucial for imperial administration, defining tax districts, postal routes, and military logistics.
- 20th Century Standardization: Following the establishment of the Republic of China, efforts were made to align traditional units with the metric system. In 1929, alongside the standardization of the Chi as 1/3 meter, the Li was officially defined as 1500 Chi, which resulted in exactly 500 meters (0.5 kilometers). This standard was maintained by the People's Republic of China.
The Li's historical significance lies in its role as the standard measure for long distances, shaping perceptions of geography and travel within China and neighboring East Asian cultures influenced by the Chinese system.
The concept of measuring stellar distances via parallax existed long before the unit itself. The term "parsec" was coined by the British astronomer Herbert Hall Turner in 1913. He sought a convenient unit for astronomers that directly reflected the observational method. The name is a portmanteau derived from "parallax of one arcsecond". It quickly gained acceptance within the astronomical community due to its practical connection to parallax measurements, which were (and still are) a fundamental way to determine distances to nearby stars.
Common Uses for li and parsecs
Explore the typical applications for both Li (Chinese) (imperial/US) and Parsec (imperial/US) to understand their common contexts.
Common Uses for li
While officially replaced by the kilometer for most purposes, the Li retains significance:
- Historical Measurement: Essential for understanding distances mentioned in historical texts, maps, administrative records, travelogues, and descriptions of large-scale projects like the Great Wall or canal systems.
- Geographical Names: Many place names in China incorporate "Li" (e.g., 十里堡 - Shilibao, "Ten Li Fort"), often reflecting historical distances or significance, even if the modern distance doesn't match precisely.
- Cultural References: The Li features prominently in Chinese idioms, proverbs, literature, and poetry, often symbolizing long journeys or vast distances. A famous example is 千里之行,始於足下 (qiān lǐ zhī xíng, shǐ yú zú xià - "A journey of a thousand li begins with a single step").
- Informal Usage: In some rural areas or among older generations, "Li" might still be used informally to refer to a distance of approximately half a kilometer. It can also be used colloquially as a direct synonym for 0.5 km.
- Mapping: Older maps and surveys frequently used the Li.
Common Uses for parsecs
The parsec is the preferred unit of distance in professional astronomy and astrophysics:
- Stellar Distances: Measuring distances to nearby stars using parallax.
- Galactic Structure: Describing distances within the Milky Way galaxy (often using kiloparsecs, kpc, where 1 kpc = 1000 pc). For example, the Sun is about 8 kpc from the Galactic Center.
- Extragalactic Distances: Measuring distances to other galaxies and galaxy clusters (often using megaparsecs, Mpc, where 1 Mpc = 1,000,000 pc). The Hubble constant, describing the expansion of the universe, is typically expressed in (km/s)/Mpc.
- Cosmology: Discussing large-scale structures and distances in the universe (using Mpc and sometimes gigaparsecs, Gpc, where 1 Gpc = 1000 Mpc).
Frequently Asked Questions
Questions About Li (Chinese) (li)
How long is a Li?
The length of the Li varied significantly throughout history, typically ranging from about 400 to over 500 meters. The modern standardized value (since 1929) is:
- Exactly 500 meters (m)
- Exactly 0.5 kilometers (km)
- Approximately 0.3107 miles (mi)
- Approximately 1640.42 feet (ft)
- Approximately 546.81 yards (yd)
How was the Li historically defined?
It was typically defined based on smaller units:
- 1 Li = 300 or 360 Bu (步 - paces)
- Since 1 Bu was often 5 or 6 Chi (尺 - Chinese feet), this meant *1 Li = 1500 or 1800 Chi.
- Alternatively, 1 Li = 150 Zhang (丈), where 1 Zhang = 10 Chi. The variation depended on the specific dynasty, region, and the prevailing standard length of the Chi.
How does the Li relate to the Kilometer?
The modern standardized Li is defined directly in relation to the kilometer:
- 1 Li = 0.5 Kilometers
- 1 Kilometer = 2 Li
Is the Li an SI unit?
No, the Li is not an SI unit. It is a traditional Chinese unit of distance. The SI base unit for length is the meter (m), and the commonly used unit for larger distances is the kilometer (km).
Is the Li still used today?
Officially, China uses the metric system (kilometers and meters) for all legal, commercial, scientific, and administrative purposes. However, the Li continues to be used in:
- Historical and cultural contexts.
- Geographical place names.
- Idioms and literature.
- Informal conversation, often meaning exactly 0.5 km.
Is this related to the surveying Link (li)?
No, they are completely different and unrelated units, despite the similar symbol in some contexts.
- The Chinese Li (里) is a traditional unit of distance, standardized at 500 meters.
- The Gunter's Link (li) is a historical surveying unit from the imperial system, equal to 0.201168 meters (or 7.92 inches).
About Parsec (pc)
What does 'Parsec' stand for?
Parsec is a blend of "parallax of one arcsecond". It represents the distance at which the parallax angle of a star is exactly one second of arc.
How is a parsec defined?
It's defined based on trigonometry. Imagine a right-angled triangle in space where the short side is the Earth-Sun distance (1 AU). The parsec is the length of the adjacent side when the angle at the distant star (the parallax angle) is exactly one arcsecond.
Is a Parsec bigger than a Light Year?
Yes, one parsec is significantly larger than one light-year.
- 1 Parsec ≈ 3.26 light-years
How many meters or kilometers are in a parsec?
One parsec is approximately:
- 3.0857 × 10¹⁶ meters
- 30.857 trillion kilometers
How many Astronomical Units (AU) are in a parsec?
One parsec is equal to approximately 206,265 AU. This number arises directly from the definition involving radians and arcseconds (specifically, the number of arcseconds in a radian).
Why do astronomers use parsecs instead of light-years?
While both are used, parsecs are often preferred in professional contexts because:
- Direct Observational Link: The parsec is derived directly from the parallax angle, a primary method for measuring distance.
- Historical Convention: It became the standard unit early in the development of stellar distance measurement.
- Convenience: Multiples like kpc and Mpc provide convenient scales for galactic and extragalactic distances.
- Definition Stability: The definition of a light-year depends slightly on the definition of a "year" (e.g., Julian year), whereas the parsec is based on the fixed AU and geometric angles.
Is the parsec an SI unit?
No, the parsec is not an SI unit. The SI unit for length is the meter (m). However, the parsec (along with the astronomical unit and light-year) is recognized by the International Astronomical Union (IAU) and is widely accepted for use in astronomy.
Conversion Table: Li (Chinese) to Parsec
Li (Chinese) (li) | Parsec (pc) |
---|---|
1 | 0 |
5 | 0 |
10 | 0 |
25 | 0 |
50 | 0 |
100 | 0 |
500 | 0 |
1,000 | 0 |
All Length Conversions
Other Units from Length
- Meter (m)
- Kilometer (km)
- Hectometer (hm)
- Decimeter (dm)
- Centimeter (cm)
- Millimeter (mm)
- Inch (in)
- Foot (ft)
- Yard (yd)
- Mile (mi)
- Nautical Mile (NM)
- Micrometer (μm)
- Nanometer (nm)
- Light Year (ly)
- Astronomical Unit (AU)
- Angstrom (Å)
- Point (Typography) (pt)
- Mil/Thou (mil)
- Fathom (fath)
- Furlong (fur)
- Link (Gunter's) (li)
- Pace (pace)
- Span (span)
- Digit (digit)
- Cable Length (cb)
- Ell (ell)
- Finger (finger)
- Roman Mile (m.p.)
- Stadion (stadion)
- Chi (Chinese) (chi)
- Shaku (Japanese) (shaku)
- Toise (toise)
- Bolt (bolt)
- Rope (rope)
- Smoot (smoot)
- Sajene (sajene)
- Ken (ken)
- Wa (wa)
- Vara (vara)
- Aln (aln)
- Cubit (Royal/Egyptian) (cubit)
- Versta (versta)
- Arpent (arpent)
- Ri (Japanese) (ri)
- Klafter (klafter)
- Yojana (yojana)
- Skein (skein)