Link (Gunter's) to Skein Converter
Convert links to skeins with our free online length converter.
Quick Answer
1 Link (Gunter's) = 0.001833 skeins
Formula: Link (Gunter's) × conversion factor = Skein
Use the calculator below for instant, accurate conversions.
Our Accuracy Guarantee
All conversion formulas on UnitsConverter.io have been verified against NIST (National Institute of Standards and Technology) guidelines and international SI standards. Our calculations are accurate to 10 decimal places for standard conversions and use arbitrary precision arithmetic for astronomical units.
Link (Gunter's) to Skein Calculator
How to Use the Link (Gunter's) to Skein Calculator:
- Enter the value you want to convert in the 'From' field (Link (Gunter's)).
- The converted value in Skein will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Link (Gunter's) to Skein: Step-by-Step Guide
Converting Link (Gunter's) to Skein involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Link (Gunter's) = 0.00183333 skeinsExample Calculation:
Convert 10 links: 10 × 0.00183333 = 0.0183333 skeins
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
Need to convert to other length units?
View all Length conversions →What is a Link (Gunter's) and a Skein?
The Link, specifically Gunter's Link (symbol li), is a unit of length historically used in surveying, particularly within the imperial and U.S. customary systems. It is defined as exactly 1/100th of a Gunter's chain.
One Gunter's link is equivalent to:
- 0.01 Gunter's chains
- 7.92 inches (in)
- 0.66 feet (ft) (exactly 2/3 of a foot)
- 0.22 yards (yd)
- 0.04 rods (also called poles or perches)
- 0.201168 meters (m) (exactly)
- 20.1168 centimeters (cm)
A Gunter's chain itself measures 66 feet, 22 yards, 4 rods, or 20.1168 meters.
A Skein is a traditional unit of length primarily used for measuring yarn or thread. It represents a specific length of yarn coiled into a loop, often then twisted for packaging and sale.
The length of a skein is highly variable and depends significantly on the type of fiber (e.g., cotton, wool, linen), the region, and the specific yarn count system being used. There is no single universal standard.
Common historical or industry-specific standard lengths include:
- Cotton Skein (or Hank): 840 yards (≈ 768.1 meters)
- Worsted Wool Skein (or Hank): 560 yards (≈ 512.1 meters)
- Linen Skein (or Lea): 300 yards (≈ 274.3 meters)
For the purpose of this converter, a Skein is defined as:
- Exactly 120 yards (yd)
- Exactly 109.728 meters (m)
- Exactly 360 feet (ft)
This value (120 yards) corresponds to a Lea, a unit often associated with linen and sometimes used as a subdivision or specific standard in certain yarn count systems.
Note: The Link (Gunter's) is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Skein belongs to the imperial/US customary system.
History of the Link (Gunter's) and Skein
The link, as part of Gunter's chain, was devised by the English clergyman and mathematician Edmund Gunter around 1620. He introduced a measuring chain that was 66 feet long and divided into 100 links. This system was revolutionary for surveyors because its decimal nature (100 links per chain) simplified calculations, especially for area. Land area could be easily calculated in square chains and then converted to acres, as 10 square chains equal exactly 1 acre. Gunter's chain and its links became the standard tools for land surveying in England and later throughout the British Empire and the United States for centuries.
The practice of winding yarn into standardized lengths like skeins or hanks dates back centuries. It originated as a practical way to manage, measure, dye, trade, and store yarn. Standardizing the length allowed spinners, weavers, and merchants to calculate material quantities and costs more reliably.
Different textile industries and regions developed their own specific standards for skein lengths. These standards became intrinsically linked to yarn count systems (e.g., Cotton Count (Ne), Worsted Count (Nw), Linen Count (NeL)), which define the fineness (thickness) of yarn based on the length per unit weight (e.g., the number of 840-yard hanks per pound for cotton).
While metric units (meters, kilograms) are now standard for trade, the historical skein lengths remain relevant for understanding yarn counts and for crafts like knitting and crochet where yarn is still often sold in skeins or hanks labeled with length and weight.
Common Uses and Applications: links vs skeins
Explore the typical applications for both Link (Gunter's) (imperial/US) and Skein (imperial/US) to understand their common contexts.
Common Uses for links
The Gunter's link is now largely obsolete but was historically significant:
- Land Surveying: It was the fundamental unit for measuring property boundaries and land parcels in English-speaking countries for over 300 years.
- Cartography: Used in creating maps and plats based on surveys.
- Land Records: Measurements in links (and chains) frequently appear in older property deeds, historical surveys, and legal descriptions of land. Understanding the link is crucial for interpreting these documents.
- Agriculture: The system was tied to the definition of the acre, a common unit of land area.
Its use declined dramatically with the adoption of the metric system and the advent of more precise surveying technologies like steel tapes, theodolites, Electronic Distance Measurement (EDM), and GPS.
When to Use skeins
Historically and currently, the skein (or the concept of a standard yarn length) is used in:
- Textile Industry: Calculating yarn yield, planning weaving or knitting projects, and defining yarn counts.
- Yarn Sales: Yarn for handcrafts (knitting, crochet) is commonly sold in skeins or hanks, usually labeled with weight, length (in yards or meters), and fiber type.
- Dyeing: Skeins are a convenient form for dyeing batches of yarn evenly.
- Historical Context: Understanding older textile production methods, trade practices, and calculations.
Additional Unit Information
About Link (Gunter's) (li)
How long is a Gunter's Link?
One Gunter's Link is equal to:
- 7.92 inches
- 0.66 feet (2/3 ft)
- 0.201168 meters
- 20.1168 centimeters
How many links are in a Gunter's chain?
There are exactly 100 links in one Gunter's chain.
How long is a Gunter's Chain?
One Gunter's chain is equal to:
- 100 links
- 66 feet
- 22 yards
- 4 rods (or poles, perches)
- 1/10th of a furlong
- 1/80th of a statute mile
- 20.1168 meters
How does the link relate to the acre?
The link is directly related to the acre through the Gunter's chain. An acre is defined as 10 square chains. Since 1 chain = 100 links:
- 1 acre = 10 × (100 links)² = 10 × 10,000 square links = 100,000 square links. This decimal relationship greatly simplified area calculations for surveyors using the chain.
Is the link an SI unit?
No, the Gunter's link is not an SI unit. It is part of the traditional imperial and U.S. customary systems. The corresponding SI unit for length is the meter (m).
Is the Gunter's link still used today?
No, the Gunter's link is rarely used in modern surveying practice. Its primary relevance today is in historical contexts, particularly when interpreting old land deeds, surveys, and maps created using Gunter's system. Modern surveying relies on meters or feet, measured with advanced electronic equipment.
Why was it called a 'link'?
It was called a 'link' because Gunter's chain was literally constructed from 100 physical metal links connected by rings. Each link served as a unit of measurement.
About Skein (skein)
How long is a skein?
The length varies greatly! There is no single universal value. Common standards include:
- Cotton: 840 yards (≈ 768 m)
- Worsted Wool: 560 yards (≈ 512 m)
- Linen (Lea): 300 yards (≈ 274 m)
- Value used in this converter: 120 yards (≈ 110 m), representing a specific standard sometimes called a Lea.
Always check the specific fiber type or context when dealing with skeins.
How is a skein different from a hank or a ball of yarn?
- Skein / Hank: These terms are often used interchangeably. They refer to yarn wound into a large loop, which is usually twisted for sale. This form is good for dyeing and storage but must be wound into a ball before use to prevent tangling.
- Ball: Yarn wound into a spherical or oval shape, ready for direct use in knitting or crocheting.
Sometimes "skein" is used informally to refer to any package of yarn.
What is yarn count and how does it relate to skeins?
Yarn count is a measure of the fineness (thickness) of yarn. Most systems define it based on length per unit weight. Standard skein/hank lengths are fundamental to these systems. For example:
- Cotton Count (Ne): The number of 840-yard hanks that weigh one pound. Higher Ne means finer yarn.
- Worsted Count (Nw): The number of 560-yard hanks that weigh one pound.
- Linen Count (NeL or Lea): The number of 300-yard leas that weigh one pound.
Is the Skein an SI unit?
No, the Skein is not an SI unit. It is a traditional, variable unit used in the textile industry. The SI base unit for length is the meter (m). Yarn length is typically measured in meters or yards in modern contexts.
Conversion Table: Link (Gunter's) to Skein
| Link (Gunter's) (li) | Skein (skein) |
|---|---|
| 0.5 | 0.001 |
| 1 | 0.002 |
| 1.5 | 0.003 |
| 2 | 0.004 |
| 5 | 0.009 |
| 10 | 0.018 |
| 25 | 0.046 |
| 50 | 0.092 |
| 100 | 0.183 |
| 250 | 0.458 |
| 500 | 0.917 |
| 1,000 | 1.833 |
People Also Ask
How do I convert Link (Gunter's) to Skein?
To convert Link (Gunter's) to Skein, enter the value in Link (Gunter's) in the calculator above. The conversion will happen automatically. Use our free online converter for instant and accurate results. You can also visit our length converter page to convert between other units in this category.
Learn more →What is the conversion factor from Link (Gunter's) to Skein?
The conversion factor depends on the specific relationship between Link (Gunter's) and Skein. You can find the exact conversion formula and factor on this page. Our calculator handles all calculations automatically. See the conversion table above for common values.
Can I convert Skein back to Link (Gunter's)?
Yes! You can easily convert Skein back to Link (Gunter's) by using the swap button (⇌) in the calculator above, or by visiting our Skein to Link (Gunter's) converter page. You can also explore other length conversions on our category page.
Learn more →What are common uses for Link (Gunter's) and Skein?
Link (Gunter's) and Skein are both standard units used in length measurements. They are commonly used in various applications including engineering, construction, cooking, and scientific research. Browse our length converter for more conversion options.
For more length conversion questions, visit our FAQ page or explore our conversion guides.
Helpful Conversion Guides
Learn more about unit conversion with our comprehensive guides:
📚 How to Convert Units
Step-by-step guide to unit conversion with practical examples.
🔢 Conversion Formulas
Essential formulas for length and other conversions.
⚖️ Metric vs Imperial
Understand the differences between measurement systems.
⚠️ Common Mistakes
Learn about frequent errors and how to avoid them.
All Length Conversions
Other Length Units and Conversions
Explore other length units and their conversion options:
- Meter (m) • Link (Gunter's) to Meter
- Kilometer (km) • Link (Gunter's) to Kilometer
- Hectometer (hm) • Link (Gunter's) to Hectometer
- Decimeter (dm) • Link (Gunter's) to Decimeter
- Centimeter (cm) • Link (Gunter's) to Centimeter
- Millimeter (mm) • Link (Gunter's) to Millimeter
- Inch (in) • Link (Gunter's) to Inch
- Foot (ft) • Link (Gunter's) to Foot
- Yard (yd) • Link (Gunter's) to Yard
- Mile (mi) • Link (Gunter's) to Mile
Verified Against Authority Standards
All conversion formulas have been verified against international standards and authoritative sources to ensure maximum accuracy and reliability.
National Institute of Standards and Technology — Official US standards for length measurements
Bureau International des Poids et Mesures — International System of Units official documentation
Last verified: February 19, 2026