Link (Gunter's) to Vara Converter
Convert links to varas with our free online length converter.
Quick Answer
1 Link (Gunter's) = 0.24 varas
Formula: Link (Gunter's) × conversion factor = Vara
Use the calculator below for instant, accurate conversions.
Our Accuracy Guarantee
All conversion formulas on UnitsConverter.io have been verified against NIST (National Institute of Standards and Technology) guidelines and international SI standards. Our calculations are accurate to 10 decimal places for standard conversions and use arbitrary precision arithmetic for astronomical units.
Link (Gunter's) to Vara Calculator
How to Use the Link (Gunter's) to Vara Calculator:
- Enter the value you want to convert in the 'From' field (Link (Gunter's)).
- The converted value in Vara will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Link (Gunter's) to Vara: Step-by-Step Guide
Converting Link (Gunter's) to Vara involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Link (Gunter's) = 0.24 varasExample Calculation:
Convert 10 links: 10 × 0.24 = 2.4 varas
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
Need to convert to other length units?
View all Length conversions →What is a Link (Gunter's) and a Vara?
The Link, specifically Gunter's Link (symbol li), is a unit of length historically used in surveying, particularly within the imperial and U.S. customary systems. It is defined as exactly 1/100th of a Gunter's chain.
One Gunter's link is equivalent to:
- 0.01 Gunter's chains
- 7.92 inches (in)
- 0.66 feet (ft) (exactly 2/3 of a foot)
- 0.22 yards (yd)
- 0.04 rods (also called poles or perches)
- 0.201168 meters (m) (exactly)
- 20.1168 centimeters (cm)
A Gunter's chain itself measures 66 feet, 22 yards, 4 rods, or 20.1168 meters.
The Vara (Spanish and Portuguese for "rod" or "pole") is a traditional Iberian unit of length, roughly comparable to the English yard. Its precise length varied significantly depending on the region and historical period, reflecting local customs and lack of centralized standardization before the metric era.
Commonly cited values include:
- Castilian Vara (Vara de Castilla): Approximately 83.59 centimeters (cm) or 32.91 inches (in). This was arguably the most influential standard in Spain and many of its colonies.
- Portuguese Vara: Typically longer, around 110 cm or 43.3 inches.
- Texas Vara: Legally defined in Texas as exactly 33 1/3 inches (approximately 84.67 cm).
Other regional variations existed throughout Spain, Portugal, Latin America, and other territories under their influence.
Note: The Link (Gunter's) is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Vara belongs to the imperial/US customary system.
History of the Link (Gunter's) and Vara
The link, as part of Gunter's chain, was devised by the English clergyman and mathematician Edmund Gunter around 1620. He introduced a measuring chain that was 66 feet long and divided into 100 links. This system was revolutionary for surveyors because its decimal nature (100 links per chain) simplified calculations, especially for area. Land area could be easily calculated in square chains and then converted to acres, as 10 square chains equal exactly 1 acre. Gunter's chain and its links became the standard tools for land surveying in England and later throughout the British Empire and the United States for centuries.
The Vara likely originated from Roman units like the virga and became a fundamental measure in Spain and Portugal during the Middle Ages. Its use spread extensively through colonization from the 15th century onwards, becoming the standard for land measurement and trade in vast territories across the Americas (including areas now part of the US like Texas, California, Florida), Africa, and Asia.
Despite attempts to standardize, such as establishing the Vara de Castilla (sometimes associated with Burgos), enforcement across diverse and distant colonies was inconsistent. This led to the development and persistence of numerous local Varas, often differing slightly based on regional decrees or customary usage. For example:
- The Mexican Vara was later standardized at approximately 83.8 cm, very close to the Castilian.
- The Texas Vara was given its specific legal definition (33 1/3 inches) which remains crucial for interpreting historical land grants in the state.
The adoption of the metric system, beginning in the 19th century, gradually led to the official obsolescence of the Vara in most countries. However, its historical importance, particularly in land records, ensures its continued relevance.
Common Uses and Applications: links vs varas
Explore the typical applications for both Link (Gunter's) (imperial/US) and Vara (imperial/US) to understand their common contexts.
Common Uses for links
The Gunter's link is now largely obsolete but was historically significant:
- Land Surveying: It was the fundamental unit for measuring property boundaries and land parcels in English-speaking countries for over 300 years.
- Cartography: Used in creating maps and plats based on surveys.
- Land Records: Measurements in links (and chains) frequently appear in older property deeds, historical surveys, and legal descriptions of land. Understanding the link is crucial for interpreting these documents.
- Agriculture: The system was tied to the definition of the acre, a common unit of land area.
Its use declined dramatically with the adoption of the metric system and the advent of more precise surveying technologies like steel tapes, theodolites, Electronic Distance Measurement (EDM), and GPS.
When to Use varas
Historically, the Vara was a primary unit for:
- Land Surveying: Measuring property boundaries, town lots, roads, and vast land grants. It is frequently encountered in historical deeds and surveys throughout Latin America and the Southwestern United States.
- Trade and Commerce: Measuring textiles (cloth), rope, lumber, and other goods sold by length.
- Architecture and Construction: Laying out building foundations, measuring walls, and quantifying construction materials.
- Agriculture: Measuring field dimensions or distances for planting.
Its use today is almost entirely historical or related to the interpretation of old documents and land titles.
Additional Unit Information
About Link (Gunter's) (li)
How long is a Gunter's Link?
One Gunter's Link is equal to:
- 7.92 inches
- 0.66 feet (2/3 ft)
- 0.201168 meters
- 20.1168 centimeters
How many links are in a Gunter's chain?
There are exactly 100 links in one Gunter's chain.
How long is a Gunter's Chain?
One Gunter's chain is equal to:
- 100 links
- 66 feet
- 22 yards
- 4 rods (or poles, perches)
- 1/10th of a furlong
- 1/80th of a statute mile
- 20.1168 meters
How does the link relate to the acre?
The link is directly related to the acre through the Gunter's chain. An acre is defined as 10 square chains. Since 1 chain = 100 links:
- 1 acre = 10 × (100 links)² = 10 × 10,000 square links = 100,000 square links. This decimal relationship greatly simplified area calculations for surveyors using the chain.
Is the link an SI unit?
No, the Gunter's link is not an SI unit. It is part of the traditional imperial and U.S. customary systems. The corresponding SI unit for length is the meter (m).
Is the Gunter's link still used today?
No, the Gunter's link is rarely used in modern surveying practice. Its primary relevance today is in historical contexts, particularly when interpreting old land deeds, surveys, and maps created using Gunter's system. Modern surveying relies on meters or feet, measured with advanced electronic equipment.
Why was it called a 'link'?
It was called a 'link' because Gunter's chain was literally constructed from 100 physical metal links connected by rings. Each link served as a unit of measurement.
About Vara (vara)
Why does the length of a Vara vary so much?
The variation stems from several factors:
- Long History: The unit was used for centuries before rigorous international standards like the metric system existed.
- Decentralized Standards: Measurement standards were often set locally or regionally (by kingdom, province, or even city) rather than being effectively enforced across entire empires.
- Physical Standards: Early standards were often based on physical rods, which could vary slightly or degrade over time.
- Customary Usage: Local trade practices and customs often solidified specific lengths for the Vara in different areas. While influential standards like the Castilian Vara existed, practical enforcement across vast colonial territories was difficult, allowing regional variations to flourish and persist.
Is the Vara still used today?
Officially, the Vara has been superseded by the metric system in Spain, Portugal, and all Latin American countries. However, it remains highly relevant in specific contexts:
- Historical Land Records: It is essential for interpreting historical land surveys, deeds, and grants, particularly in Texas, California, New Mexico, Florida, and throughout Latin America. Legal property descriptions may still reference original measurements in Varas.
- Historical Research: Understanding the Vara is crucial for historians studying architecture, urban planning, trade, or agriculture in regions formerly under Spanish or Portuguese rule.
- Cultural Context: While not used for practical measurement, the term might appear in historical literature, place names, or cultural discussions. In very rare, localized instances, informal references might persist among older generations.
How long is a Vara?
There is no single universal length. You must consider the specific regional and historical context. Key values include:
- Castilian Vara (Spain): ~83.59 cm / ~32.91 inches
- Portuguese Vara: ~110 cm / ~43.3 inches
- Mexican Vara: ~83.8 cm / ~33.0 inches
- Texas Vara (USA): Exactly 33 1/3 inches / ~84.67 cm
How does the Vara compare to a Yard or Meter?
- Most common Varas (Castilian, Mexican, Texas) are shorter than both a meter (100 cm) and an English yard (91.44 cm / 36 inches).
- 1 Meter ≈ 1.18 to 1.20 Varas (Castilian/Texas)
- 1 Yard ≈ 1.09 to 1.10 Varas (Castilian/Texas)
- The Portuguese Vara (~1.1 m) is longer than both a meter and a yard.
- 1 Meter ≈ 0.91 Portuguese Varas
- 1 Yard ≈ 0.83 Portuguese Varas
Is the Vara an SI unit?
No, the Vara is not an SI unit. It is a traditional unit belonging to the historical Spanish and Portuguese systems of measurement. The SI base unit for length is the meter (m).
Conversion Table: Link (Gunter's) to Vara
| Link (Gunter's) (li) | Vara (vara) |
|---|---|
| 0.5 | 0.12 |
| 1 | 0.24 |
| 1.5 | 0.36 |
| 2 | 0.48 |
| 5 | 1.2 |
| 10 | 2.4 |
| 25 | 6 |
| 50 | 12 |
| 100 | 24 |
| 250 | 60 |
| 500 | 120 |
| 1,000 | 240 |
People Also Ask
How do I convert Link (Gunter's) to Vara?
To convert Link (Gunter's) to Vara, enter the value in Link (Gunter's) in the calculator above. The conversion will happen automatically. Use our free online converter for instant and accurate results. You can also visit our length converter page to convert between other units in this category.
Learn more →What is the conversion factor from Link (Gunter's) to Vara?
The conversion factor depends on the specific relationship between Link (Gunter's) and Vara. You can find the exact conversion formula and factor on this page. Our calculator handles all calculations automatically. See the conversion table above for common values.
Can I convert Vara back to Link (Gunter's)?
Yes! You can easily convert Vara back to Link (Gunter's) by using the swap button (⇌) in the calculator above, or by visiting our Vara to Link (Gunter's) converter page. You can also explore other length conversions on our category page.
Learn more →What are common uses for Link (Gunter's) and Vara?
Link (Gunter's) and Vara are both standard units used in length measurements. They are commonly used in various applications including engineering, construction, cooking, and scientific research. Browse our length converter for more conversion options.
For more length conversion questions, visit our FAQ page or explore our conversion guides.
Helpful Conversion Guides
Learn more about unit conversion with our comprehensive guides:
📚 How to Convert Units
Step-by-step guide to unit conversion with practical examples.
🔢 Conversion Formulas
Essential formulas for length and other conversions.
⚖️ Metric vs Imperial
Understand the differences between measurement systems.
⚠️ Common Mistakes
Learn about frequent errors and how to avoid them.
All Length Conversions
Other Length Units and Conversions
Explore other length units and their conversion options:
- Meter (m) • Link (Gunter's) to Meter
- Kilometer (km) • Link (Gunter's) to Kilometer
- Hectometer (hm) • Link (Gunter's) to Hectometer
- Decimeter (dm) • Link (Gunter's) to Decimeter
- Centimeter (cm) • Link (Gunter's) to Centimeter
- Millimeter (mm) • Link (Gunter's) to Millimeter
- Inch (in) • Link (Gunter's) to Inch
- Foot (ft) • Link (Gunter's) to Foot
- Yard (yd) • Link (Gunter's) to Yard
- Mile (mi) • Link (Gunter's) to Mile
Verified Against Authority Standards
All conversion formulas have been verified against international standards and authoritative sources to ensure maximum accuracy and reliability.
National Institute of Standards and Technology — Official US standards for length measurements
Bureau International des Poids et Mesures — International System of Units official documentation
Last verified: February 19, 2026