Mile to Cable Length Converter

Convert miles to cable lengths with our free online length converter.

Quick Answer

1 Mile = 8.689762 cable lengths

Formula: Mile Γ— conversion factor = Cable Length

Use the calculator below for instant, accurate conversions.

Our Accuracy Guarantee

All conversion formulas on UnitsConverter.io have been verified against NIST (National Institute of Standards and Technology) guidelines and international SI standards. Our calculations are accurate to 10 decimal places for standard conversions and use arbitrary precision arithmetic for astronomical units.

Last verified: February 2026Reviewed by: Sam Mathew, Software Engineer

Mile to Cable Length Calculator

How to Use the Mile to Cable Length Calculator:

  1. Enter the value you want to convert in the 'From' field (Mile).
  2. The converted value in Cable Length will appear automatically in the 'To' field.
  3. Use the dropdown menus to select different units within the Length category.
  4. Click the swap button (β‡Œ) to reverse the conversion direction.
Share:

How to Convert Mile to Cable Length: Step-by-Step Guide

Converting Mile to Cable Length involves multiplying the value by a specific conversion factor, as shown in the formula below.

Formula:

1 Mile = 8.689762 cable lengths

Example Calculation:

Convert 10 miles: 10 Γ— 8.689762 = 86.89762 cable lengths

Disclaimer: For Reference Only

These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.

Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.

What is a Mile and a Cable Length?

The mile (symbol: mi or sometimes mi.) is a unit of length defined as exactly 5,280 feet, which equals 1,760 yards or 1,609.344 meters in the metric system.

Standard Mile (Statute Mile)

In the United States, the statute mile (land mile) is the standard distance measurement for:

  • Road distances: "Exit 42, 3 miles"
  • Speed limits: "Speed Limit 65 mph" (miles per hour)
  • Vehicle odometers: Car mileage readings
  • Real estate: "Located 2 miles from the beach"
  • Running races: The classic mile race, 5K (3.1 miles), 10K (6.2 miles), marathon (26.2 miles)
  • Property records: Land surveys, real estate listings, school district boundaries

Important Distinctions: Types of Miles

When Americans say "mile," they almost always mean the statute mile (5,280 feet). However, there are other types of miles:

1. Statute Mile (Land Mile):

  • 5,280 feet or 1,609.344 meters
  • Standard mile used on land for roads, running, and general measurement
  • Used in US, UK (roads), Myanmar

2. Nautical Mile:

  • 6,076 feet or 1,852 meters
  • Used in maritime and aviation contexts
  • One nautical mile = one minute of latitude on Earth (1/60th of a degree)
  • Approximately 15% longer than statute mile
  • Speed: measured in knots (nautical miles per hour)

3. Survey Mile (US):

  • Historically used in US land surveys before 1959
  • Slightly different from international mile (difference ~2 parts per million)
  • 1 US survey mile = 5,280 US survey feet = 1,609.347 meters (vs. 1,609.344 international)
  • Rarely encountered today outside historical property records
  • Some older property boundaries still reference survey miles

Why 5,280 Feet? The Furlong Explanation

The number 5,280 seems arbitrary, but it has historical logic:

Furlong Division:

  • A furlong is an old English unit = 660 feet (220 yards)
  • Etymology: "furrow long"β€”the distance a team of oxen could plow before needing rest
  • 8 furlongs = 1 mile β†’ 8 Γ— 660 = 5,280 feet
  • Made the mile extremely practical for agricultural land measurement

Elizabethan Standardization (1593):

  • Queen Elizabeth I's statute defined mile = 8 furlongs
  • Reconciled competing systems:
    • Agricultural furlongs (essential for land surveys)
    • Traditional Roman-derived mile lengths (~5,000 feet)
  • Cementing the 5,280-foot standard that persists 430+ years later

Divisibility advantages:

  • 5,280 is divisible by: 1, 2, 3, 4, 5, 6, 8, 10, 11, 12, 15, 16, 20, 22, 24, 30, 32, 33, 40, 44, 48, 60, 66, 80, 88, 96, 110, 120, 132, 160, 176, 220, 240, 264, 330, 352, 440, 480, 528, 660, 880, 1056, 1320, 1760, 2640, 5280
  • Makes fractions (1/2, 1/4, 1/8, 1/10 mile) easy whole numbers in feet

A Cable Length (symbol cb), often shortened to cable, is a nautical unit of length, traditionally related to the length of a ship's anchor cable. While its exact length has varied historically and geographically, it is now most commonly defined internationally as one-tenth of a nautical mile (1/10 NM).

This standard definition equates to:

  • 185.2 meters (m)
  • Approximately 607.61 feet (ft)
  • Approximately 202.54 yards (yd)

Other historical definitions based on the fathom also exist.

Note: The Mile is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Cable Length belongs to the imperial/US customary system.

History of the Mile and Cable Length

of the Mile

1. Roman Origins: Mille Passus (Ancient Rome, ~500 BCE - 476 CE)

The word "mile" derives from the Latin "mille passus", meaning "a thousand paces."

Roman pace (passus):

  • Distance from where one foot left the ground to where the same foot landed again
  • Essentially two steps (left step + right step = 1 pace)
  • Approximately 5 Roman feet per pace

Roman mile:

  • 1,000 paces = approximately 5,000 Roman feet
  • Modern equivalent: ~4,850-5,000 modern feet (Roman foot β‰ˆ 11.65 inches)
  • Roman roads throughout empire marked with milestones (miliarium) at one-mile intervals
  • Milestones showed distance to Rome ("All roads lead to Rome")

Roman road system:

  • Over 250,000 miles of roads at empire's peak
  • Standardized mile markers enabled trade, military logistics, taxation
  • Many modern European roads follow ancient Roman routes

2. Medieval Variation (476 CE - 1593)

After the fall of the Roman Empire (476 CE), mile lengths varied dramatically across regions:

England:

  • Miles ranged from 5,000 to 6,000 feet depending on region and purpose
  • London mile, merchant mile, agricultural mile all differed
  • Created confusion for trade, land ownership, taxation

Scotland:

  • Scottish mile = approximately 5,952 feet (about 13% longer than modern statute mile)
  • Remained in use until Scotland adopted English statute mile (18th century)

Ireland:

  • Irish mile = approximately 6,720 feet (about 27% longer than statute mile)
  • Used until Irish Free State adopted statute mile (1826)

Germanic regions:

  • Various "meile" lengths: Prussian mile ~24,000 feet, Bavarian mile ~27,000 feet
  • Some exceeded 4-5 modern statute miles in length
  • Created massive confusion for international trade

Why such variation?

  • No central authority after Rome's fall
  • Local rulers set own standards
  • Miles based on local geographic features (e.g., distance between towns)
  • Agricultural needs varied by region (different furlong lengths)

3. 1593: Elizabethan Standardization

Queen Elizabeth I's Statute (1593):

  • English Parliament passed Act during Elizabeth I's reign
  • Defined statute mile as exactly 8 furlongs or 5,280 feet
  • Became legal standard throughout England, Wales, later entire British Empire

Why this specific definition?

  1. Reconciled competing systems:
    • Traditional mile lengths (Roman-derived ~5,000 feet)
    • Agricultural furlongs (660 feet, critical for land surveys)
  2. Agricultural economy:
    • England's economy heavily agricultural in 1590s
    • Land measurement = taxation, property rights, inheritance
    • Furlong-based system essential for open field system farming
  3. Mathematical convenience:
    • 8 furlongs = easy subdivision (1/2 mile = 4 furlongs, 1/4 mile = 2 furlongs)
    • 5,280 feet highly divisible (see "Why 5,280 Feet?" section)

Spread through British Empire:

  • England β†’ British colonies (American colonies, India, Australia, Canada, etc.)
  • By 1800s, statute mile used across most English-speaking world
  • Became embedded in American infrastructure during colonial period

4. 1959: International Yard and Pound Agreement

Background:

  • By 1950s, slight variations existed between US and British yard/foot definitions
  • Caused problems for international engineering, aviation, scientific collaboration
  • Difference tiny (~2 parts per million) but mattered for precision work

Agreement (July 1, 1959):

  • Participating countries: US, UK, Canada, Australia, New Zealand, South Africa
  • Defined 1 yard = exactly 0.9144 meters (based on metric system)
  • Automatically defined 1 foot = exactly 0.3048 meters
  • 1 mile = exactly 1,609.344 meters (5,280 Γ— 0.3048)

Impact:

  • Eliminated tiny measurement variations between English-speaking countries
  • Anchored imperial units to metric system for first time
  • Enabled precise conversions for international trade, aviation, engineering
  • US survey mile retained for legacy land surveys (pre-1959 property records)

Today:

  • International mile (1,609.344 meters) universally used
  • US survey mile exists only in historical documents
  • Metric system standard for science; mile persists for US/UK roads

5. Modern Usage and Metrication Resistance

Countries still using miles (2025):

  • United States: All road signs, speed limits, odometers in miles/mph
  • United Kingdom: Road signs and speed limits in miles/mph (other measurements metric)
  • Myanmar (Burma): Officially uses miles, though metric adoption increasing

Countries that switched from miles to kilometers:

  • Canada: Converted 1970s (gradual process, completed by 1980)
  • Australia: Converted 1970s (metric conversion 1970-1988)
  • New Zealand: Converted 1970s
  • Ireland: Converted 2005 (last EU country to switch road signs)
  • South Africa: Converted 1970s

Why US hasn't converted:

  1. Infrastructure investment: Millions of road signs, billions of dollars to replace
  2. Vehicle fleet: 250+ million vehicles with mph speedometers
  3. Public resistance: Multiple metrication attempts (1970s Metric Conversion Act) failed
  4. Economic factors: No compelling economic advantage (US economy functions fine with miles)
  5. Cultural identity: Miles seen as part of American tradition

US Metric Conversion Act (1975):

  • Made metric system "preferred" for US trade and commerce
  • Made conversion voluntary, not mandatory
  • Created US Metric Board (later disbanded)
  • Resulted in "soft metrication" (2-liter soda bottles, 100m races) but not roads

The unit originated from the practical length of a ship's anchor cable (or "shot" of chain) used in the age of sail. Anchor cables were typically manufactured in standard lengths that could be shackled together. This length provided a convenient unit for measuring distances related to anchoring and maneuvering close to shore or other vessels.

However, the length was not universally standardized:

  • In the British Royal Navy, a cable was traditionally defined as 100 fathoms (equivalent to 600 feet or 182.88 meters).
  • In the U.S. Navy, it was often defined as 120 fathoms (equivalent to 720 feet or 219.456 meters).

With the international adoption of the nautical mile (defined as 1852 meters), defining the cable as exactly one-tenth of this value (185.2 m) created a convenient, decimal-based relationship and became the most common modern standard, sometimes referred to as the "international cable length".

Common Uses and Applications: miles vs cable lengths

Explore the typical applications for both Mile (imperial/US) and Cable Length (imperial/US) to understand their common contexts.

Common Uses for miles

and Applications

1. Trip Planning and Navigation

Road trip calculations:

  • Distance: "It's 450 miles to Los Angeles"
  • Time estimate: 450 miles Γ· 60 mph average = 7.5 hours driving
  • Fuel needed: 450 miles Γ· 25 mpg = 18 gallons
  • Fuel cost: 18 gallons Γ— $4/gallon = $72

GPS navigation:

  • Displays distances in miles for US users
  • "In 2.3 miles, turn right"
  • "Arrive at destination in 14 miles, 18 minutes"
  • Route comparison: "Route A: 45 miles, 52 min" vs. "Route B: 38 miles, 58 min (toll road)"

Range anxiety (electric vehicles):

  • EV range: 250-350 miles typical
  • Plan charging stops for long trips: "Supercharger 180 miles ahead"

2. Speed and Velocity Measurement

Miles per hour (mph):

  • Residential: 25 mph speed limit (1 mile in 2.4 minutes)
  • Highway: 65 mph (1 mile per minute approximately)
  • Mental math: 60 mph = exactly 1 mile per minute

Speeding tickets:

  • Fines often based on mph over limit: "15 mph over = $150 fine, 25 mph over = $300"
  • Reckless driving threshold: Often 20+ mph over limit or >80 mph

Sports:

  • Baseball pitch speed: 90 mph fastball
  • Tennis serve: 120+ mph
  • Golf ball: 170+ mph off driver

3. Fitness Tracking and Health

Daily step goals:

  • 10,000 steps/day = approximately 4-5 miles walked
  • Average person: 2,000-2,500 steps per mile
  • Taller individuals: 1,800-2,200 steps per mile

Calorie burn (walking):

  • 100 calories per mile (rule of thumb, varies by weight/pace)
  • 150 lb person walking 3 mph: ~80-100 calories per mile
  • Running: ~100-150 calories per mile depending on weight/pace

Fitness tracker displays:

  • Daily distance: "You walked 3.2 miles today"
  • Weekly total: "18.5 miles this week"
  • Monthly challenges: "Walk 100 miles in September"

4. Land Measurement and Surveying

Section-township system (US land surveys):

  • Section: 1 square mile = 640 acres
  • Township: 36 square miles (6 miles Γ— 6 miles grid)
  • Used in most US states for property descriptions

Rural property:

  • "40-acre parcel with 0.5 miles of river frontage"
  • "Quarter section" = 0.25 square miles = 160 acres

Easements and rights-of-way:

  • "Pipeline easement extends 5 miles across property"
  • "Utility right-of-way 20 feet wide, 2 miles long"

5. Emergency Services and Safety

911 response zones:

  • Fire stations: Typically serve 5-10 mile radius
  • Ambulance response: Target <8 minutes = ~3-4 mile radius at urban speeds
  • Police patrols: Beat areas often 5-15 square miles

Evacuation orders:

  • Mandatory evacuation: "All residents within 5 miles of refinery must evacuate"
  • Wildfire evacuations: "Residents within 10 miles ordered to leave"

Warning systems:

  • Tornado warning: Typically covers 5-10 mile path
  • Flash flood warning: Watershed areas (drainage basins, measured in square miles)

6. Business and Commerce

Delivery radius:

  • Food delivery: Typically 3-5 mile radius from restaurant
  • Same-day delivery: Amazon, Walmart often 10-20 mile radius from fulfillment center
  • Service area: Plumbers, electricians often advertise "20-mile service radius"

Trade area analysis:

  • Primary trade area: 1-3 miles (70-80% of customers)
  • Secondary trade area: 3-7 miles (15-20% of customers)
  • Tertiary trade area: >7 miles (5-10% of customers)

Franchise territories:

  • Fast food franchises: Often granted 3-5 mile exclusive territory

7. Military and Defense

Weapons ranges:

  • Small arms: <1 mile effective range
  • Artillery: 10-30 miles depending on system
  • Cruise missiles: 1,000+ miles

Territorial waters:

  • Territorial sea: 12 nautical miles from coastline (13.8 statute miles)
  • Contiguous zone: 24 nautical miles (27.6 statute miles)
  • Exclusive Economic Zone (EEZ): 200 nautical miles (230 statute miles)

When to Use cable lengths

The cable length, particularly the 1/10 NM definition, remains in use in specific maritime contexts:

  • Nautical Navigation & Ship Handling: Measuring short distances at sea, such as the distance between ships in formation, distance off a navigational hazard, distance to a pier, estimating anchor drag, or describing the scope (length) of anchor cable paid out.
  • Hydrographic Surveying: Historically used on nautical charts, although meters are now the primary international standard for depth and short distances on modern charts.
  • Naval Terminology: Persists in naval traditions and communications for describing close ranges.
  • Historical Context: Encountered in older maritime texts, logs, charts, and naval records.

Additional Unit Information

About Cable Length (cb)

What are the different values for a cable length?

The value depends on the definition being used:

  • International Standard: 1 cable = 1/10 nautical mile = 185.2 meters β‰ˆ 607.61 feet. (Most common modern definition)
  • British Traditional: 1 cable = 100 fathoms = 182.88 meters = 600 feet.
  • US Traditional: 1 cable = 120 fathoms = 219.456 meters = 720 feet.

Always clarify which definition is intended if precision is critical, though the 1/10 NM version is generally assumed today unless otherwise specified.

How many meters are in a standard cable length?

The internationally recognized standard cable length is exactly 185.2 meters.

How many feet are in a standard cable length?

The internationally recognized standard cable length is approximately 607.61 feet. The traditional British cable was 600 ft, and the traditional US cable was 720 ft.

Is the cable length related to the nautical mile?

Yes, the most common modern definition establishes a direct relationship: 1 cable length = 1/10 nautical mile.

Is the cable length an SI unit?

No, the cable length is not an SI unit. It is a traditional nautical unit derived from maritime practice and later linked to the nautical mile. The corresponding SI unit for length is the meter (m).

Is the cable length still used today?

Yes, while meters and nautical miles are standard for most navigation, the cable length (especially the 1/10 NM definition) is still actively used in specific maritime applications like anchoring, close maneuvering, naval operations, and sometimes in recreational boating contexts. It serves as a convenient subdivision of the nautical mile.

Conversion Table: Mile to Cable Length

Mile (mi)Cable Length (cb)
0.54.345
18.69
1.513.035
217.38
543.449
1086.898
25217.244
50434.488
100868.976
2502,172.441
5004,344.881
1,0008,689.762

People Also Ask

How do I convert Mile to Cable Length?

To convert Mile to Cable Length, enter the value in Mile in the calculator above. The conversion will happen automatically. Use our free online converter for instant and accurate results. You can also visit our length converter page to convert between other units in this category.

Learn more β†’

What is the conversion factor from Mile to Cable Length?

The conversion factor depends on the specific relationship between Mile and Cable Length. You can find the exact conversion formula and factor on this page. Our calculator handles all calculations automatically. See the conversion table above for common values.

Can I convert Cable Length back to Mile?

Yes! You can easily convert Cable Length back to Mile by using the swap button (β‡Œ) in the calculator above, or by visiting our Cable Length to Mile converter page. You can also explore other length conversions on our category page.

Learn more β†’

What are common uses for Mile and Cable Length?

Mile and Cable Length are both standard units used in length measurements. They are commonly used in various applications including engineering, construction, cooking, and scientific research. Browse our length converter for more conversion options.

For more length conversion questions, visit our FAQ page or explore our conversion guides.

All Length Conversions

Meter to KilometerMeter to HectometerMeter to DecimeterMeter to CentimeterMeter to MillimeterMeter to InchMeter to FootMeter to YardMeter to MileMeter to Nautical MileMeter to MicrometerMeter to NanometerMeter to Light YearMeter to Astronomical UnitMeter to ParsecMeter to AngstromMeter to Point (Typography)Meter to Mil/ThouMeter to FathomMeter to FurlongMeter to Link (Gunter's)Meter to PaceMeter to SpanMeter to DigitMeter to Cable LengthMeter to EllMeter to FingerMeter to Roman MileMeter to StadionMeter to Chi (Chinese)Meter to Shaku (Japanese)Meter to Li (Chinese)Meter to ToiseMeter to BoltMeter to RopeMeter to SmootMeter to SajeneMeter to KenMeter to WaMeter to VaraMeter to AlnMeter to Cubit (Royal/Egyptian)Meter to VerstaMeter to ArpentMeter to Ri (Japanese)Meter to KlafterMeter to YojanaMeter to SkeinKilometer to MeterKilometer to HectometerKilometer to DecimeterKilometer to CentimeterKilometer to MillimeterKilometer to InchKilometer to FootKilometer to YardKilometer to MileKilometer to Nautical MileKilometer to MicrometerKilometer to NanometerKilometer to Light YearKilometer to Astronomical UnitKilometer to ParsecKilometer to AngstromKilometer to Point (Typography)Kilometer to Mil/ThouKilometer to FathomKilometer to FurlongKilometer to Link (Gunter's)Kilometer to PaceKilometer to SpanKilometer to DigitKilometer to Cable LengthKilometer to EllKilometer to FingerKilometer to Roman MileKilometer to StadionKilometer to Chi (Chinese)Kilometer to Shaku (Japanese)Kilometer to Li (Chinese)Kilometer to ToiseKilometer to BoltKilometer to RopeKilometer to SmootKilometer to SajeneKilometer to KenKilometer to WaKilometer to VaraKilometer to AlnKilometer to Cubit (Royal/Egyptian)Kilometer to VerstaKilometer to ArpentKilometer to Ri (Japanese)Kilometer to KlafterKilometer to YojanaKilometer to SkeinHectometer to MeterHectometer to KilometerHectometer to DecimeterHectometer to CentimeterHectometer to MillimeterHectometer to InchHectometer to FootHectometer to YardHectometer to MileHectometer to Nautical MileHectometer to MicrometerHectometer to NanometerHectometer to Light YearHectometer to Astronomical UnitHectometer to ParsecHectometer to AngstromHectometer to Point (Typography)Hectometer to Mil/ThouHectometer to FathomHectometer to FurlongHectometer to Link (Gunter's)Hectometer to PaceHectometer to SpanHectometer to Digit

Verified Against Authority Standards

All conversion formulas have been verified against international standards and authoritative sources to ensure maximum accuracy and reliability.

NIST Guide for the Use of SI

National Institute of Standards and Technology β€” Official US standards for length measurements

SI Brochure

Bureau International des Poids et Mesures β€” International System of Units official documentation

Last verified: February 19, 2026