Pace to Klafter Conversion Calculator: Free Online Tool
Convert paces to klafter with our free online length converter.
Pace to Klafter Calculator
How to Use the Calculator:
- Enter the value you want to convert in the 'From' field (Pace).
- The converted value in Klafter will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Pace to Klafter
Converting Pace to Klafter involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Pace = 0.401793 klafterExample Calculation:
Convert 10 paces: 10 × 0.401793 = 4.017928 klafter
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
What is a Pace and a Klafter?
The Pace is a unit of length based on the distance covered by a human step. Its definition is highly variable and depends heavily on context, often referring to either a single step or a double step.
- Single Step Pace: Often informally estimated as the distance from the heel of one foot to the heel of the next foot in a normal walking stride. Common estimations range from 2.5 to 3 feet (ft) or approximately 0.75 to 0.9 meters (m). This is sometimes simply called a 'step' or 'stride'.
- Double Step Pace (Roman Pace): Historically, the most significant definition was the Roman passus, which measured the distance from the heel of one foot to the point where the same foot touches the ground again (i.e., two steps). This was standardized as 5 Roman feet, roughly 1.48 meters or 4.86 feet.
Due to its inherent variability and dependence on individual gait and terrain, the pace is not a standardized unit for precise measurement.
The Klafter is a historical unit of length originating from Central Europe, particularly prominent in German-speaking regions like Austria, Bavaria, Prussia, and Switzerland. It is conceptually similar to the fathom, often defined by the span of a person's outstretched arms.
While its exact length varied significantly by region and time, a widely recognized standard, especially from the Austrian Empire, defines the Klafter as 6 Vienna feet (Wiener Fuß). This equates to approximately:
- 1.8965 meters (m)
- 6.222 feet (ft) (using the Vienna foot of ~0.31608 m)
The Klafter was also used as a unit of area (Quadratklafter or square Klafter) and volume (Kubikklafter or cubic Klafter), especially for measuring firewood (often called a Raummeter or Ster in this context, though volumes could vary). This page focuses on the linear Klafter.
Note: The Pace is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Klafter belongs to the imperial/US customary system.
History of the Pace and Klafter
The pace is one of the most ancient and intuitive units of length, used across numerous cultures due to its direct link to human locomotion.
- Ancient Rome: The Romans formalized the passus (double step) as 5 pedes (Roman feet). This unit was fundamental to their system, with 1000 passus forming the Roman mile (mille passus), which heavily influenced the definition of the mile in later systems.
- Military Usage: Throughout history, armies used paces (both single and double) for marching cadence, estimating distances, and measuring fortifications or camp layouts. Standardized step lengths were often drilled.
- Informal Measurement: Before widespread standardized rulers and tapes, pacing was a common way for individuals to estimate lengths and distances for land, construction, or travel.
The pace gradually fell out of official use with the rise of standardized systems like the Imperial system (feet, yards) and the Metric system (meters), which offered greater precision and consistency.
The term "Klafter" likely derives from Old High German klāftra, related to the act of embracing or grasping, reflecting its origin as an anthropometric unit based on arm span.
- Regional Variations: Before widespread standardization and metrication, the length of the Klafter differed across various German states and Swiss cantons. For example, the Prussian Klafter was slightly different from the Austrian one.
- Standardization Efforts: Attempts were made to standardize measures, with the Austrian system (based on the Wiener Fuß) becoming influential. The definition of 1 Klafter = 6 Fuß (feet) = 72 Zoll (inches) was common, but the length of the Fuß itself varied.
- Dual Use (Length & Volume): The Klafter was notably used for measuring stacked firewood. A Klafter Holz typically referred to a stack of wood 1 Klafter high, 1 Klafter wide, and a specific log length (often 3 or 4 feet), representing a volume unit.
- Metrication: The Klafter became obsolete following the adoption of the metric system across Central Europe, primarily during the latter half of the 19th century (e.g., Germany 1872, Austria 1876).
Common Uses for paces and klafter
Explore the typical applications for both Pace (imperial/US) and Klafter (imperial/US) to understand their common contexts.
Common Uses for paces
While obsolete for official measurements, the pace still finds some use:
- Rough Estimation: Used informally to get a quick approximation of distances, such as the length of a room, a garden plot, or walking distances in hiking or orienteering.
- Military & Marching Bands: Concepts related to pace length and cadence remain relevant in drilling and formation marching.
- Historical Context: Understanding the pace (especially the Roman passus) is crucial for interpreting historical texts, military accounts, and measurements related to ancient structures or distances.
- Exercise & Fitness: Step counters (pedometers) measure activity in terms of steps, which are essentially single paces.
Common Uses for klafter
Historically, the Klafter served various measurement needs:
- Forestry: Measuring timber lengths and, crucially, the volume of stacked firewood.
- Mining: Measuring the depth of shafts and the length of tunnels.
- Construction: Measuring building dimensions, rope lengths, and materials.
- Surveying: Measuring land distances and areas (Quadratklafter), although units like the Ruthe (rod) were also common for land.
- Nautical: Sometimes used similarly to a fathom for measuring water depth or rope lengths, though less common than the English fathom in maritime contexts.
Today, its use is confined to historical records, architectural studies, forestry history, and understanding old land deeds or documents.
Frequently Asked Questions
Questions About Pace (pace)
How long is a pace?
There is no single standard length for a "pace".
- An informal single step pace is often estimated at 2.5 to 3 feet (0.75 to 0.9 meters).
- The historical Roman pace (passus) was a double step, standardized at 5 Roman feet (approx. 1.48 meters or 4.86 feet). Always clarify which definition is being used.
What is the difference between a pace and a Roman pace?
A "pace" is ambiguous. It can mean a single step (variable length, ~2.5-3 ft) or a double step. The Roman pace (passus) specifically refers to the double step standardized at 5 Roman feet (~1.48 m).
What is the difference between a pace and a step or stride?
Often, "step" or "stride" refers to the distance covered by a single movement of one foot forward (heel-to-heel or toe-to-toe). "Pace" can mean this, but it can also refer to the Roman double step (passus). The ambiguity makes "step" or "stride" slightly clearer when referring to a single foot movement.
How many paces are in a mile?
This depends on the definition of "pace":
- Using the Roman pace (passus): The Roman mile (mille passus) was defined as 1000 paces (double steps).
- Using an informal single step pace: If we estimate a single step pace at 2.5 feet, a statute mile (5280 feet) would contain 5280 / 2.5 = 2112 single paces. If estimated at 3 feet, it would be 5280 / 3 = 1760 single paces. This is highly approximate.
Is the pace an SI unit?
No, the pace is not an SI unit. It is an ancient, non-standardized, anthropomorphic unit. The SI unit for length is the meter (m).
Is the pace still used today?
The pace is not used for any official, scientific, or trade measurements today due to its lack of standardization. Its use is confined to informal distance estimation, historical study, and contexts like military drilling or fitness tracking (as steps).
About Klafter (klafter)
How long is a Klafter?
The length varied, but the most common standard, based on the Austrian system, is:
- Exactly 6 Vienna Feet (Wiener Fuß)
- Approximately 1.8965 meters
- Approximately 6.222 feet
Other historical values might range roughly from 1.7 to 1.95 meters depending on the specific regional "foot" standard used.
Is a Klafter the same as a fathom?
Conceptually, they are very similar, both derived from the span of outstretched arms. Numerically, they are close but distinct.
- Klafter (Austrian): ~1.8965 meters / ~6.222 feet
- Fathom (International): Exactly 1.8288 meters / 6 feet
So, the common Austrian Klafter was slightly longer than the standard fathom.
What were the main related units in the Austrian system?
The Klafter was part of a system:
- 1 Klafter = 6 Fuß (Vienna Foot or Wiener Schuh)
- 1 Fuß = 12 Zoll (Vienna Inch or Wiener Zoll)
- 1 Zoll ≈ 2.634 cm / 1.037 inches
- 1 Fuß ≈ 31.608 cm / 12.444 inches / 1.037 feet
Where was the Klafter primarily used?
It was used across Central Europe, notably in:
- Austria-Hungary
- Southern German states (Bavaria, Württemberg)
- Prussia (with a slightly different length)
- Switzerland
- Other parts of the Holy Roman Empire and subsequent German Confederation.
Is the Klafter still used today?
No, the Klafter is obsolete for practical measurements. It was replaced by the meter during metrication in the 19th century. Its relevance is purely historical.
How does a Klafter compare to a meter or foot?
- A Klafter (~1.9 m) is almost twice as long as a meter. (1 Klafter ≈ 1.9 m)
- A Klafter (~6.2 ft) is significantly longer than a standard foot. (1 Klafter ≈ 6.2 ft)
Is the Klafter an SI unit?
No, the Klafter is not an SI unit. It is a traditional unit from historical Central European measurement systems. The SI base unit for length is the meter (m).
Conversion Table: Pace to Klafter
| Pace (pace) | Klafter (klafter) |
|---|---|
| 1 | 0.402 |
| 5 | 2.009 |
| 10 | 4.018 |
| 25 | 10.045 |
| 50 | 20.09 |
| 100 | 40.179 |
| 500 | 200.896 |
| 1,000 | 401.793 |
All Length Conversions
Other Units from Length
- Meter (m)
- Kilometer (km)
- Hectometer (hm)
- Decimeter (dm)
- Centimeter (cm)
- Millimeter (mm)
- Inch (in)
- Foot (ft)
- Yard (yd)
- Mile (mi)
- Nautical Mile (NM)
- Micrometer (μm)
- Nanometer (nm)
- Light Year (ly)
- Astronomical Unit (AU)
- Parsec (pc)
- Angstrom (Å)
- Point (Typography) (pt)
- Mil/Thou (mil)
- Fathom (fath)
- Furlong (fur)
- Link (Gunter's) (li)
- Span (span)
- Digit (digit)
- Cable Length (cb)
- Ell (ell)
- Finger (finger)
- Roman Mile (m.p.)
- Stadion (stadion)
- Chi (Chinese) (chi)
- Shaku (Japanese) (shaku)
- Li (Chinese) (li)
- Toise (toise)
- Bolt (bolt)
- Rope (rope)
- Smoot (smoot)
- Sajene (sajene)
- Ken (ken)
- Wa (wa)
- Vara (vara)
- Aln (aln)
- Cubit (Royal/Egyptian) (cubit)
- Versta (versta)
- Arpent (arpent)
- Ri (Japanese) (ri)
- Yojana (yojana)
- Skein (skein)