Pace to Mile Converter
Convert paces to miles with our free online length converter.
Quick Answer
1 Pace = 0.000473 miles
Formula: Pace Γ conversion factor = Mile
Use the calculator below for instant, accurate conversions.
Our Accuracy Guarantee
All conversion formulas on UnitsConverter.io have been verified against NIST (National Institute of Standards and Technology) guidelines and international SI standards. Our calculations are accurate to 10 decimal places for standard conversions and use arbitrary precision arithmetic for astronomical units.
Pace to Mile Calculator
How to Use the Pace to Mile Calculator:
- Enter the value you want to convert in the 'From' field (Pace).
- The converted value in Mile will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (β) to reverse the conversion direction.
How to Convert Pace to Mile: Step-by-Step Guide
Converting Pace to Mile involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Pace = 0.000473485 milesExample Calculation:
Convert 10 paces: 10 Γ 0.000473485 = 0.00473485 miles
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
Need to convert to other length units?
View all Length conversions βWhat is a Pace and a Mile?
The Pace is a unit of length based on the distance covered by a human step. Its definition is highly variable and depends heavily on context, often referring to either a single step or a double step.
- Single Step Pace: Often informally estimated as the distance from the heel of one foot to the heel of the next foot in a normal walking stride. Common estimations range from 2.5 to 3 feet (ft) or approximately 0.75 to 0.9 meters (m). This is sometimes simply called a 'step' or 'stride'.
- Double Step Pace (Roman Pace): Historically, the most significant definition was the Roman passus, which measured the distance from the heel of one foot to the point where the same foot touches the ground again (i.e., two steps). This was standardized as 5 Roman feet, roughly 1.48 meters or 4.86 feet.
Due to its inherent variability and dependence on individual gait and terrain, the pace is not a standardized unit for precise measurement.
The mile (symbol: mi or sometimes mi.) is a unit of length defined as exactly 5,280 feet, which equals 1,760 yards or 1,609.344 meters in the metric system.
Standard Mile (Statute Mile)
In the United States, the statute mile (land mile) is the standard distance measurement for:
- Road distances: "Exit 42, 3 miles"
- Speed limits: "Speed Limit 65 mph" (miles per hour)
- Vehicle odometers: Car mileage readings
- Real estate: "Located 2 miles from the beach"
- Running races: The classic mile race, 5K (3.1 miles), 10K (6.2 miles), marathon (26.2 miles)
- Property records: Land surveys, real estate listings, school district boundaries
Important Distinctions: Types of Miles
When Americans say "mile," they almost always mean the statute mile (5,280 feet). However, there are other types of miles:
1. Statute Mile (Land Mile):
- 5,280 feet or 1,609.344 meters
- Standard mile used on land for roads, running, and general measurement
- Used in US, UK (roads), Myanmar
2. Nautical Mile:
- 6,076 feet or 1,852 meters
- Used in maritime and aviation contexts
- One nautical mile = one minute of latitude on Earth (1/60th of a degree)
- Approximately 15% longer than statute mile
- Speed: measured in knots (nautical miles per hour)
3. Survey Mile (US):
- Historically used in US land surveys before 1959
- Slightly different from international mile (difference ~2 parts per million)
- 1 US survey mile = 5,280 US survey feet = 1,609.347 meters (vs. 1,609.344 international)
- Rarely encountered today outside historical property records
- Some older property boundaries still reference survey miles
Why 5,280 Feet? The Furlong Explanation
The number 5,280 seems arbitrary, but it has historical logic:
Furlong Division:
- A furlong is an old English unit = 660 feet (220 yards)
- Etymology: "furrow long"βthe distance a team of oxen could plow before needing rest
- 8 furlongs = 1 mile β 8 Γ 660 = 5,280 feet
- Made the mile extremely practical for agricultural land measurement
Elizabethan Standardization (1593):
- Queen Elizabeth I's statute defined mile = 8 furlongs
- Reconciled competing systems:
- Agricultural furlongs (essential for land surveys)
- Traditional Roman-derived mile lengths (~5,000 feet)
- Cementing the 5,280-foot standard that persists 430+ years later
Divisibility advantages:
- 5,280 is divisible by: 1, 2, 3, 4, 5, 6, 8, 10, 11, 12, 15, 16, 20, 22, 24, 30, 32, 33, 40, 44, 48, 60, 66, 80, 88, 96, 110, 120, 132, 160, 176, 220, 240, 264, 330, 352, 440, 480, 528, 660, 880, 1056, 1320, 1760, 2640, 5280
- Makes fractions (1/2, 1/4, 1/8, 1/10 mile) easy whole numbers in feet
Note: The Pace is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Mile belongs to the imperial/US customary system.
History of the Pace and Mile
The pace is one of the most ancient and intuitive units of length, used across numerous cultures due to its direct link to human locomotion.
- Ancient Rome: The Romans formalized the passus (double step) as 5 pedes (Roman feet). This unit was fundamental to their system, with 1000 passus forming the Roman mile (mille passus), which heavily influenced the definition of the mile in later systems.
- Military Usage: Throughout history, armies used paces (both single and double) for marching cadence, estimating distances, and measuring fortifications or camp layouts. Standardized step lengths were often drilled.
- Informal Measurement: Before widespread standardized rulers and tapes, pacing was a common way for individuals to estimate lengths and distances for land, construction, or travel.
The pace gradually fell out of official use with the rise of standardized systems like the Imperial system (feet, yards) and the Metric system (meters), which offered greater precision and consistency.
of the Mile
1. Roman Origins: Mille Passus (Ancient Rome, ~500 BCE - 476 CE)
The word "mile" derives from the Latin "mille passus", meaning "a thousand paces."
Roman pace (passus):
- Distance from where one foot left the ground to where the same foot landed again
- Essentially two steps (left step + right step = 1 pace)
- Approximately 5 Roman feet per pace
Roman mile:
- 1,000 paces = approximately 5,000 Roman feet
- Modern equivalent: ~4,850-5,000 modern feet (Roman foot β 11.65 inches)
- Roman roads throughout empire marked with milestones (miliarium) at one-mile intervals
- Milestones showed distance to Rome ("All roads lead to Rome")
Roman road system:
- Over 250,000 miles of roads at empire's peak
- Standardized mile markers enabled trade, military logistics, taxation
- Many modern European roads follow ancient Roman routes
2. Medieval Variation (476 CE - 1593)
After the fall of the Roman Empire (476 CE), mile lengths varied dramatically across regions:
England:
- Miles ranged from 5,000 to 6,000 feet depending on region and purpose
- London mile, merchant mile, agricultural mile all differed
- Created confusion for trade, land ownership, taxation
Scotland:
- Scottish mile = approximately 5,952 feet (about 13% longer than modern statute mile)
- Remained in use until Scotland adopted English statute mile (18th century)
Ireland:
- Irish mile = approximately 6,720 feet (about 27% longer than statute mile)
- Used until Irish Free State adopted statute mile (1826)
Germanic regions:
- Various "meile" lengths: Prussian mile ~24,000 feet, Bavarian mile ~27,000 feet
- Some exceeded 4-5 modern statute miles in length
- Created massive confusion for international trade
Why such variation?
- No central authority after Rome's fall
- Local rulers set own standards
- Miles based on local geographic features (e.g., distance between towns)
- Agricultural needs varied by region (different furlong lengths)
3. 1593: Elizabethan Standardization
Queen Elizabeth I's Statute (1593):
- English Parliament passed Act during Elizabeth I's reign
- Defined statute mile as exactly 8 furlongs or 5,280 feet
- Became legal standard throughout England, Wales, later entire British Empire
Why this specific definition?
- Reconciled competing systems:
- Traditional mile lengths (Roman-derived ~5,000 feet)
- Agricultural furlongs (660 feet, critical for land surveys)
- Agricultural economy:
- England's economy heavily agricultural in 1590s
- Land measurement = taxation, property rights, inheritance
- Furlong-based system essential for open field system farming
- Mathematical convenience:
- 8 furlongs = easy subdivision (1/2 mile = 4 furlongs, 1/4 mile = 2 furlongs)
- 5,280 feet highly divisible (see "Why 5,280 Feet?" section)
Spread through British Empire:
- England β British colonies (American colonies, India, Australia, Canada, etc.)
- By 1800s, statute mile used across most English-speaking world
- Became embedded in American infrastructure during colonial period
4. 1959: International Yard and Pound Agreement
Background:
- By 1950s, slight variations existed between US and British yard/foot definitions
- Caused problems for international engineering, aviation, scientific collaboration
- Difference tiny (~2 parts per million) but mattered for precision work
Agreement (July 1, 1959):
- Participating countries: US, UK, Canada, Australia, New Zealand, South Africa
- Defined 1 yard = exactly 0.9144 meters (based on metric system)
- Automatically defined 1 foot = exactly 0.3048 meters
- 1 mile = exactly 1,609.344 meters (5,280 Γ 0.3048)
Impact:
- Eliminated tiny measurement variations between English-speaking countries
- Anchored imperial units to metric system for first time
- Enabled precise conversions for international trade, aviation, engineering
- US survey mile retained for legacy land surveys (pre-1959 property records)
Today:
- International mile (1,609.344 meters) universally used
- US survey mile exists only in historical documents
- Metric system standard for science; mile persists for US/UK roads
5. Modern Usage and Metrication Resistance
Countries still using miles (2025):
- United States: All road signs, speed limits, odometers in miles/mph
- United Kingdom: Road signs and speed limits in miles/mph (other measurements metric)
- Myanmar (Burma): Officially uses miles, though metric adoption increasing
Countries that switched from miles to kilometers:
- Canada: Converted 1970s (gradual process, completed by 1980)
- Australia: Converted 1970s (metric conversion 1970-1988)
- New Zealand: Converted 1970s
- Ireland: Converted 2005 (last EU country to switch road signs)
- South Africa: Converted 1970s
Why US hasn't converted:
- Infrastructure investment: Millions of road signs, billions of dollars to replace
- Vehicle fleet: 250+ million vehicles with mph speedometers
- Public resistance: Multiple metrication attempts (1970s Metric Conversion Act) failed
- Economic factors: No compelling economic advantage (US economy functions fine with miles)
- Cultural identity: Miles seen as part of American tradition
US Metric Conversion Act (1975):
- Made metric system "preferred" for US trade and commerce
- Made conversion voluntary, not mandatory
- Created US Metric Board (later disbanded)
- Resulted in "soft metrication" (2-liter soda bottles, 100m races) but not roads
Common Uses and Applications: paces vs miles
Explore the typical applications for both Pace (imperial/US) and Mile (imperial/US) to understand their common contexts.
Common Uses for paces
While obsolete for official measurements, the pace still finds some use:
- Rough Estimation: Used informally to get a quick approximation of distances, such as the length of a room, a garden plot, or walking distances in hiking or orienteering.
- Military & Marching Bands: Concepts related to pace length and cadence remain relevant in drilling and formation marching.
- Historical Context: Understanding the pace (especially the Roman passus) is crucial for interpreting historical texts, military accounts, and measurements related to ancient structures or distances.
- Exercise & Fitness: Step counters (pedometers) measure activity in terms of steps, which are essentially single paces.
When to Use miles
and Applications
1. Trip Planning and Navigation
Road trip calculations:
- Distance: "It's 450 miles to Los Angeles"
- Time estimate: 450 miles Γ· 60 mph average = 7.5 hours driving
- Fuel needed: 450 miles Γ· 25 mpg = 18 gallons
- Fuel cost: 18 gallons Γ $4/gallon = $72
GPS navigation:
- Displays distances in miles for US users
- "In 2.3 miles, turn right"
- "Arrive at destination in 14 miles, 18 minutes"
- Route comparison: "Route A: 45 miles, 52 min" vs. "Route B: 38 miles, 58 min (toll road)"
Range anxiety (electric vehicles):
- EV range: 250-350 miles typical
- Plan charging stops for long trips: "Supercharger 180 miles ahead"
2. Speed and Velocity Measurement
Miles per hour (mph):
- Residential: 25 mph speed limit (1 mile in 2.4 minutes)
- Highway: 65 mph (1 mile per minute approximately)
- Mental math: 60 mph = exactly 1 mile per minute
Speeding tickets:
- Fines often based on mph over limit: "15 mph over = $150 fine, 25 mph over = $300"
- Reckless driving threshold: Often 20+ mph over limit or >80 mph
Sports:
- Baseball pitch speed: 90 mph fastball
- Tennis serve: 120+ mph
- Golf ball: 170+ mph off driver
3. Fitness Tracking and Health
Daily step goals:
- 10,000 steps/day = approximately 4-5 miles walked
- Average person: 2,000-2,500 steps per mile
- Taller individuals: 1,800-2,200 steps per mile
Calorie burn (walking):
- 100 calories per mile (rule of thumb, varies by weight/pace)
- 150 lb person walking 3 mph: ~80-100 calories per mile
- Running: ~100-150 calories per mile depending on weight/pace
Fitness tracker displays:
- Daily distance: "You walked 3.2 miles today"
- Weekly total: "18.5 miles this week"
- Monthly challenges: "Walk 100 miles in September"
4. Land Measurement and Surveying
Section-township system (US land surveys):
- Section: 1 square mile = 640 acres
- Township: 36 square miles (6 miles Γ 6 miles grid)
- Used in most US states for property descriptions
Rural property:
- "40-acre parcel with 0.5 miles of river frontage"
- "Quarter section" = 0.25 square miles = 160 acres
Easements and rights-of-way:
- "Pipeline easement extends 5 miles across property"
- "Utility right-of-way 20 feet wide, 2 miles long"
5. Emergency Services and Safety
911 response zones:
- Fire stations: Typically serve 5-10 mile radius
- Ambulance response: Target <8 minutes = ~3-4 mile radius at urban speeds
- Police patrols: Beat areas often 5-15 square miles
Evacuation orders:
- Mandatory evacuation: "All residents within 5 miles of refinery must evacuate"
- Wildfire evacuations: "Residents within 10 miles ordered to leave"
Warning systems:
- Tornado warning: Typically covers 5-10 mile path
- Flash flood warning: Watershed areas (drainage basins, measured in square miles)
6. Business and Commerce
Delivery radius:
- Food delivery: Typically 3-5 mile radius from restaurant
- Same-day delivery: Amazon, Walmart often 10-20 mile radius from fulfillment center
- Service area: Plumbers, electricians often advertise "20-mile service radius"
Trade area analysis:
- Primary trade area: 1-3 miles (70-80% of customers)
- Secondary trade area: 3-7 miles (15-20% of customers)
- Tertiary trade area: >7 miles (5-10% of customers)
Franchise territories:
- Fast food franchises: Often granted 3-5 mile exclusive territory
7. Military and Defense
Weapons ranges:
- Small arms: <1 mile effective range
- Artillery: 10-30 miles depending on system
- Cruise missiles: 1,000+ miles
Territorial waters:
- Territorial sea: 12 nautical miles from coastline (13.8 statute miles)
- Contiguous zone: 24 nautical miles (27.6 statute miles)
- Exclusive Economic Zone (EEZ): 200 nautical miles (230 statute miles)
Additional Unit Information
About Pace (pace)
How long is a pace?
There is no single standard length for a "pace".
- An informal single step pace is often estimated at 2.5 to 3 feet (0.75 to 0.9 meters).
- The historical Roman pace (passus) was a double step, standardized at 5 Roman feet (approx. 1.48 meters or 4.86 feet). Always clarify which definition is being used.
What is the difference between a pace and a Roman pace?
A "pace" is ambiguous. It can mean a single step (variable length, ~2.5-3 ft) or a double step. The Roman pace (passus) specifically refers to the double step standardized at 5 Roman feet (~1.48 m).
What is the difference between a pace and a step or stride?
Often, "step" or "stride" refers to the distance covered by a single movement of one foot forward (heel-to-heel or toe-to-toe). "Pace" can mean this, but it can also refer to the Roman double step (passus). The ambiguity makes "step" or "stride" slightly clearer when referring to a single foot movement.
How many paces are in a mile?
This depends on the definition of "pace":
- Using the Roman pace (passus): The Roman mile (mille passus) was defined as 1000 paces (double steps).
- Using an informal single step pace: If we estimate a single step pace at 2.5 feet, a statute mile (5280 feet) would contain 5280 / 2.5 = 2112 single paces. If estimated at 3 feet, it would be 5280 / 3 = 1760 single paces. This is highly approximate.
Is the pace an SI unit?
No, the pace is not an SI unit. It is an ancient, non-standardized, anthropomorphic unit. The SI unit for length is the meter (m).
Is the pace still used today?
The pace is not used for any official, scientific, or trade measurements today due to its lack of standardization. Its use is confined to informal distance estimation, historical study, and contexts like military drilling or fitness tracking (as steps).
Conversion Table: Pace to Mile
| Pace (pace) | Mile (mi) |
|---|---|
| 0.5 | 0 |
| 1 | 0.001 |
| 1.5 | 0.001 |
| 2 | 0.001 |
| 5 | 0.002 |
| 10 | 0.005 |
| 25 | 0.012 |
| 50 | 0.024 |
| 100 | 0.047 |
| 250 | 0.118 |
| 500 | 0.237 |
| 1,000 | 0.474 |
People Also Ask
How do I convert Pace to Mile?
To convert Pace to Mile, enter the value in Pace in the calculator above. The conversion will happen automatically. Use our free online converter for instant and accurate results. You can also visit our length converter page to convert between other units in this category.
Learn more βWhat is the conversion factor from Pace to Mile?
The conversion factor depends on the specific relationship between Pace and Mile. You can find the exact conversion formula and factor on this page. Our calculator handles all calculations automatically. See the conversion table above for common values.
Can I convert Mile back to Pace?
Yes! You can easily convert Mile back to Pace by using the swap button (β) in the calculator above, or by visiting our Mile to Pace converter page. You can also explore other length conversions on our category page.
Learn more βWhat are common uses for Pace and Mile?
Pace and Mile are both standard units used in length measurements. They are commonly used in various applications including engineering, construction, cooking, and scientific research. Browse our length converter for more conversion options.
For more length conversion questions, visit our FAQ page or explore our conversion guides.
Helpful Conversion Guides
Learn more about unit conversion with our comprehensive guides:
π How to Convert Units
Step-by-step guide to unit conversion with practical examples.
π’ Conversion Formulas
Essential formulas for length and other conversions.
βοΈ Metric vs Imperial
Understand the differences between measurement systems.
β οΈ Common Mistakes
Learn about frequent errors and how to avoid them.
All Length Conversions
Other Length Units and Conversions
Explore other length units and their conversion options:
- Meter (m) β’ Pace to Meter
- Kilometer (km) β’ Pace to Kilometer
- Hectometer (hm) β’ Pace to Hectometer
- Decimeter (dm) β’ Pace to Decimeter
- Centimeter (cm) β’ Pace to Centimeter
- Millimeter (mm) β’ Pace to Millimeter
- Inch (in) β’ Pace to Inch
- Foot (ft) β’ Pace to Foot
- Yard (yd) β’ Pace to Yard
- Nautical Mile (NM) β’ Pace to Nautical Mile
Verified Against Authority Standards
All conversion formulas have been verified against international standards and authoritative sources to ensure maximum accuracy and reliability.
National Institute of Standards and Technology β Official US standards for length measurements
Bureau International des Poids et Mesures β International System of Units official documentation
Last verified: December 3, 2025