Rope to Span Converter
Convert ropes to spans with our free online length converter.
Quick Answer
1 Rope = 26.666667 spans
Formula: Rope × conversion factor = Span
Use the calculator below for instant, accurate conversions.
Our Accuracy Guarantee
All conversion formulas on UnitsConverter.io have been verified against NIST (National Institute of Standards and Technology) guidelines and international SI standards. Our calculations are accurate to 10 decimal places for standard conversions and use arbitrary precision arithmetic for astronomical units.
Rope to Span Calculator
How to Use the Rope to Span Calculator:
- Enter the value you want to convert in the 'From' field (Rope).
- The converted value in Span will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Rope to Span: Step-by-Step Guide
Converting Rope to Span involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Rope = 26.66667 spansExample Calculation:
Convert 10 ropes: 10 × 26.66667 = 266.6667 spans
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
Need to convert to other length units?
View all Length conversions →What is a Rope and a Span?
The Rope is an historical English unit of length, primarily used in surveying and sometimes in building or architecture. Its length was typically defined as 20 feet.
This equates to:
- 6.096 meters (m)
- Approximately 6.67 yards (yd)
Unlike more standardized surveying units like the chain, the rope's length could sometimes vary by region or specific use, but 20 feet is the most commonly cited value.
The Span is an ancient unit of length based on the distance across an outstretched human hand, measured from the tip of the thumb to the tip of the little finger (or sometimes the index finger). As an anthropomorphic unit, its length was inherently variable, depending on the size of an individual's hand.
Historically, it was often defined in relation to other body-based units:
- Typically considered half a cubit.
- Often equated to 3 palms (where a palm is the width of the hand across the base of the fingers).
- Sometimes defined as 12 digits (fingerbreadths).
A common, though unofficial, modern estimate for a span is around 9 inches or approximately 22.86 centimeters (cm).
Note: The Rope is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Span belongs to the imperial/US customary system.
History of the Rope and Span
The origin of the Rope unit likely stems directly from the use of actual ropes of a predetermined length for measuring land or distances in medieval England and potentially earlier. Before the widespread adoption of more durable and precise measuring tools like metal chains (such as Gunter's chain, introduced in the 17th century), knotted or marked ropes served as practical, albeit less accurate, instruments for surveyors.
The length of 20 feet provided a convenient measure for certain types of land division or construction layout. However, ropes were susceptible to stretching, shrinking (when wet), and wear, leading to inconsistencies. This lack of precision contributed to its gradual replacement by the rod (16.5 feet) and the chain (66 feet) for official surveying work. The Rope unit fell into obsolescence as measurement standards became more rigorous and legally defined.
The span is one of the oldest informal units of measurement, used by numerous ancient civilizations, including the Egyptians, Israelites, Greeks, and Romans, due to the convenience of using the human hand.
- Ancient Egypt & Mesopotamia: The span was used alongside the cubit and digit. The relationship (often 1 span = 1/2 cubit) was fundamental in their systems.
- Biblical References: The span is mentioned in the Bible (e.g., Exodus 28:16 describing the High Priest's breastplate, Goliath's height in some interpretations).
- Ancient Greece & Rome: Used as a practical subdivision of the cubit.
- Medieval Europe: Continued in informal use and sometimes appeared in texts defining lengths. In England, it was often standardized (unofficially) as 9 inches.
Like other anthropomorphic units, the span fell out of official use with the development and adoption of more standardized systems like the Imperial (inches, feet) and Metric (meters) systems, which provided necessary precision for trade, science, and industry.
Common Uses and Applications: ropes vs spans
Explore the typical applications for both Rope (imperial/US) and Span (imperial/US) to understand their common contexts.
Common Uses for ropes
The Rope is now an obsolete unit, but historically it was used for:
- Land Surveying: Measuring property boundaries, fields, and plots of land, particularly in older or less formal surveys.
- Building and Construction: Laying out foundations or measuring lengths in large-scale construction projects in historical contexts.
- Agriculture: Estimating field sizes or row lengths.
- Nautical Measurement (Less Common): Occasionally, "rope" might refer to specific lengths used on ships, but this is distinct from the land surveying unit and often context-dependent (similar to a "cable length").
When to Use spans
The span is now obsolete for precise or official measurements but is still encountered or used in specific contexts:
- Informal Estimation: Used for quick, rough measurements of moderate lengths where precision is not critical (e.g., gardening, crafts, estimating object sizes).
- Historical Texts: Found in ancient and medieval documents, requiring understanding for interpretation.
- Anthropology & Archaeology: Relevant when studying historical measurement systems or interpreting dimensions from ancient sites.
- Figurative Language: Can be used metaphorically to denote a small distance or extent ("life span").
- Understanding Historical Units: Key to grasping the relationship between units like the digit, palm, and cubit in ancient systems.
Additional Unit Information
About Rope (rope)
How long is a Rope?
The most common definition for the historical English Rope unit is 20 feet, which is exactly 6.096 meters.
How does the Rope compare to other surveying units?
- Rod (or Pole, Perch): 1 Rod = 16.5 feet. Therefore, 1 Rope ≈ 1.21 Rods.
- Gunter's Chain: 1 Chain = 66 feet = 4 Rods. Therefore, 1 Chain = 3.3 Ropes.
- Foot: 1 Rope = 20 feet.
- Yard: 1 Rope ≈ 6.67 yards.
Was the Rope a standardized unit?
No, it was not rigorously standardized like later units such as the foot or the Gunter's chain. While 20 feet was a common value, variations could exist, and the physical nature of a rope made it inherently less precise than metal instruments.
Is the Rope unit still used today?
No, the Rope as a formal unit of length is obsolete. Modern surveying uses meters, feet, and occasionally chains or rods in specific legal contexts (like older land deeds in the US), but not the Rope.
Is the Rope an SI unit?
No, the Rope is not an SI unit. It is a traditional English unit. The SI base unit for length is the meter (m).
About Span (span)
How long is a span?
There is no single, universally fixed length for a span because it's based on human hand size. However:
- A common historical and modern estimate is 9 inches (in).
- This is approximately 22.86 centimeters (cm) or 0.2286 meters (m).
- Historically, it was often defined as half a cubit, which varied (e.g., a common cubit of ~18 inches would yield a 9-inch span).
What is the relationship between a span and a cubit?
In many historical systems, a span was considered half (1/2) of a cubit. Since cubits themselves varied (e.g., common cubit vs. royal cubit), the exact length of the span derived this way also varied.
What is the relationship between a span and a palm or digit?
Common relationships, though varying by system, were:
- 1 span ≈ 3 palms (where a palm is the width of the hand).
- 1 span ≈ 12 digits (where a digit is the width of a finger).
Is the span an SI unit?
No, the span is not an SI unit. It is an ancient, non-standardized, anthropomorphic unit. The SI base unit for length is the meter (m).
Is the span still used today?
The span is not used for any official, scientific, or commercial measurements. Its use is limited to informal estimations, historical context, and figurative language. People might still use their own hand span for a quick size check.
Where does the name 'span' come from?
The word "span" comes from Old English spann, related to the verb spannan, meaning "to stretch, extend, or connect". This directly reflects the action of stretching the hand to measure the unit.
Conversion Table: Rope to Span
| Rope (rope) | Span (span) |
|---|---|
| 0.5 | 13.333 |
| 1 | 26.667 |
| 1.5 | 40 |
| 2 | 53.333 |
| 5 | 133.333 |
| 10 | 266.667 |
| 25 | 666.667 |
| 50 | 1,333.333 |
| 100 | 2,666.667 |
| 250 | 6,666.667 |
| 500 | 13,333.333 |
| 1,000 | 26,666.667 |
People Also Ask
How do I convert Rope to Span?
To convert Rope to Span, enter the value in Rope in the calculator above. The conversion will happen automatically. Use our free online converter for instant and accurate results. You can also visit our length converter page to convert between other units in this category.
Learn more →What is the conversion factor from Rope to Span?
The conversion factor depends on the specific relationship between Rope and Span. You can find the exact conversion formula and factor on this page. Our calculator handles all calculations automatically. See the conversion table above for common values.
Can I convert Span back to Rope?
Yes! You can easily convert Span back to Rope by using the swap button (⇌) in the calculator above, or by visiting our Span to Rope converter page. You can also explore other length conversions on our category page.
Learn more →What are common uses for Rope and Span?
Rope and Span are both standard units used in length measurements. They are commonly used in various applications including engineering, construction, cooking, and scientific research. Browse our length converter for more conversion options.
For more length conversion questions, visit our FAQ page or explore our conversion guides.
Helpful Conversion Guides
Learn more about unit conversion with our comprehensive guides:
📚 How to Convert Units
Step-by-step guide to unit conversion with practical examples.
🔢 Conversion Formulas
Essential formulas for length and other conversions.
⚖️ Metric vs Imperial
Understand the differences between measurement systems.
⚠️ Common Mistakes
Learn about frequent errors and how to avoid them.
All Length Conversions
Other Length Units and Conversions
Explore other length units and their conversion options:
Verified Against Authority Standards
All conversion formulas have been verified against international standards and authoritative sources to ensure maximum accuracy and reliability.
National Institute of Standards and Technology — Official US standards for length measurements
Bureau International des Poids et Mesures — International System of Units official documentation
Last verified: December 3, 2025