Sajene to Point (Typography) Conversion Calculator: Free Online Tool
Convert sajenes to points with our free online length converter.
Sajene to Point (Typography) Calculator
How to Use the Calculator:
- Enter the value you want to convert in the 'From' field (Sajene).
- The converted value in Point (Typography) will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Sajene to Point (Typography)
Converting Sajene to Point (Typography) involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Sajene = 6047.996 pointsExample Calculation:
Convert 10 sajenes: 10 × 6047.996 = 6.0480e+4 points
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
What is a Sajene and a Point (Typography)?
The Sajene (Russian: сажень or саже́нь, IPA: [ˈsaʐɨnʲ] or [sɐˈʐɛnʲ]) is an historical Russian unit of length. It was a fundamental unit in the traditional Russian system of measures.
The standard or "state" Sajene (kazyonnaya sazhen) was legally defined as:
- 3 Arshins (another Russian unit)
- 7 English Feet (after Peter the Great's reforms aligned some Russian units with English standards)
- 84 English Inches
This equates to:
- Exactly 2.1336 meters (m)
- Exactly 7 feet (ft)
- Exactly 84 inches (in)
The Sajene was subdivided as follows:
- 1 Sajene = 3 Arshins
- 1 Arshin = 16 Vershoks (meaning 1 Sajene = 48 Vershoks)
A point is a unit of length used in typography. The desktop publishing point (DTP point or PostScript point) is defined as 1/72 of an international inch (approximately 0.3527 mm).
Note: The Sajene is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Point (Typography) belongs to the imperial/US customary system.
History of the Sajene and Point (Typography)
The Sajene was used in Russia for centuries, likely originating from an anthropomorphic measurement related to the span of outstretched arms or a person's reach, similar to the fathom in other systems. The name itself may derive from Slavic roots related to reaching or stretching.
While informal variations existed, the unit was standardized over time, notably under Peter the Great (reigned 1682–1725), who aligned the Arshin with 28 English inches, thereby fixing the standard Sajene at exactly 7 English feet (2.1336 m).
The Sajene remained a primary unit for larger measurements in Russia until the metric system was adopted following the Russian Revolution. The metric system became compulsory in the USSR on January 1, 1925, rendering the Sajene and other traditional units obsolete for official use.
Typographic points evolved from historical printing practices. The DTP point standardized previous variations for digital use.
Common Uses for sajenes and points
Explore the typical applications for both Sajene (imperial/US) and Point (Typography) (imperial/US) to understand their common contexts.
Common Uses for sajenes
The Sajene is now obsolete but was historically essential in various fields in Russia:
- Land Surveying: Measuring land plots, distances, and property boundaries.
- Architecture and Construction: Specifying dimensions of buildings, structures, and materials like timber.
- Shipbuilding: Measuring lengths related to ship design and construction.
- Rope Making: Measuring lengths of rope.
- Cartography: Used in mapmaking and geographical measurements.
- Folk Measurement: Appeared in everyday language and descriptions of distance or height.
Common Uses for points
- Specifying font sizes
- Measuring line spacing (leading) and other typographic elements
Frequently Asked Questions
Questions About Sajene (sajene)
How long is a Sajene?
The standard Russian Sajene (kazyonnaya sazhen) is exactly:
- 2.1336 meters
- 7 English feet
- 84 English inches
- 3 Arshins
What were the subdivisions of the Sajene?
The Sajene was divided into smaller traditional Russian units:
- 1 Sajene = 3 Arshins
- 1 Arshin = 16 Vershoks
- Therefore, 1 Sajene = 48 Vershoks.
Were there different types of Sajene?
Yes, besides the standard "state" Sajene (7 feet), two other common variations based on body measurements existed historically, though their lengths were less standardized:
- Makhovaya Sajene (Маховая сажень - "swinging" or "sweeping" Sajene): The distance between the fingertips of a person's outstretched arms, roughly equivalent to a fathom (approx. 1.76 meters or 5.77 feet).
- Kosaya Sajene (Косая сажень - "oblique" Sajene): The distance from the toes of one foot to the fingertips of the opposite arm raised diagonally upwards (approx. 2.48 meters or 8.14 feet). This was often used idiomatically to describe someone tall and broad-shouldered.
The kazyonnaya sazhen (7 feet) was the official standard used for legal and technical purposes.
How does the Sajene compare to a Meter or Fathom?
- 1 Sajene = 2.1336 meters
- 1 Meter ≈ 0.4687 Sajenes
- The standard Sajene (2.1336 m / 7 ft) is slightly longer than the standard English fathom (1.8288 m / 6 ft). The Makhovaya Sajene (~1.76 m) was closer in concept and length to the fathom.
Is the Sajene an SI unit?
No, the Sajene is not an SI unit. It is a traditional unit from the historical Russian system of measurement. The SI base unit for length is the meter (m).
Is the Sajene still used today?
No, the Sajene is obsolete and not used in modern measurements in Russia or elsewhere. It was officially replaced by the metric system in 1925. Its significance today is purely historical, found in old texts, documents, literature, and descriptions of historical sites or objects.
About Point (Typography) (pt)
How many points are in an inch?
In modern desktop publishing, there are exactly 72 points (pt) in 1 inch (in).
What is the difference between a point and a pixel?
A point (pt) is a unit of physical length (1/72 inch), typically used for print. A pixel (px) is a unit of digital display resolution and its physical size can vary depending on the screen's pixel density (PPI).
What does 12 pt font mean?
It means the height of the font characters (specifically, the 'em square', which includes space above and below the letters) is 12 points, or 12/72 = 1/6th of an inch.
Conversion Table: Sajene to Point (Typography)
| Sajene (sajene) | Point (Typography) (pt) |
|---|---|
| 1 | 6,047.996 |
| 5 | 30,239.981 |
| 10 | 60,479.962 |
| 25 | 151,199.905 |
| 50 | 302,399.81 |
| 100 | 604,799.619 |
| 500 | 3,023,998.095 |
| 1,000 | 6,047,996.19 |
All Length Conversions
Other Units from Length
- Meter (m)
- Kilometer (km)
- Hectometer (hm)
- Decimeter (dm)
- Centimeter (cm)
- Millimeter (mm)
- Inch (in)
- Foot (ft)
- Yard (yd)
- Mile (mi)
- Nautical Mile (NM)
- Micrometer (μm)
- Nanometer (nm)
- Light Year (ly)
- Astronomical Unit (AU)
- Parsec (pc)
- Angstrom (Å)
- Mil/Thou (mil)
- Fathom (fath)
- Furlong (fur)
- Link (Gunter's) (li)
- Pace (pace)
- Span (span)
- Digit (digit)
- Cable Length (cb)
- Ell (ell)
- Finger (finger)
- Roman Mile (m.p.)
- Stadion (stadion)
- Chi (Chinese) (chi)
- Shaku (Japanese) (shaku)
- Li (Chinese) (li)
- Toise (toise)
- Bolt (bolt)
- Rope (rope)
- Smoot (smoot)
- Ken (ken)
- Wa (wa)
- Vara (vara)
- Aln (aln)
- Cubit (Royal/Egyptian) (cubit)
- Versta (versta)
- Arpent (arpent)
- Ri (Japanese) (ri)
- Klafter (klafter)
- Yojana (yojana)
- Skein (skein)