Span to Arpent Conversion Calculator: Free Online Tool
Convert spans to arpents with our free online length converter.
Span to Arpent Calculator
How to Use the Calculator:
- Enter the value you want to convert in the 'From' field (Span).
- The converted value in Arpent will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Span to Arpent
Converting Span to Arpent involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Span = 0.00390963 arpentsExample Calculation:
Convert 10 spans: 10 × 0.00390963 = 0.0390963 arpents
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
What is a Span and a Arpent?
The Span is an ancient unit of length based on the distance across an outstretched human hand, measured from the tip of the thumb to the tip of the little finger (or sometimes the index finger). As an anthropomorphic unit, its length was inherently variable, depending on the size of an individual's hand.
Historically, it was often defined in relation to other body-based units:
- Typically considered half a cubit.
- Often equated to 3 palms (where a palm is the width of the hand across the base of the fingers).
- Sometimes defined as 12 digits (fingerbreadths).
A common, though unofficial, modern estimate for a span is around 9 inches or approximately 22.86 centimeters (cm).
The Arpent is a historical French unit used primarily for measuring land area, but also sometimes used as a unit of length. As a unit of length, the arpent typically referred to the side length of a square arpent of land.
Its precise length varied significantly by region and time period in France and its colonies. A commonly cited value, particularly associated with the arpent de Paris, is based on 180 French feet (pieds du Roi), which equates to approximately:
- 58.47 meters (m)
- 191.8 feet (ft)
Other variations existed, such as the arpent commun (based on 200 French feet, ~64.97 m) and the arpent d'ordonnance (based on 220 French feet, ~71.47 m).
Note: The Span is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Arpent belongs to the imperial/US customary system.
History of the Span and Arpent
The span is one of the oldest informal units of measurement, used by numerous ancient civilizations, including the Egyptians, Israelites, Greeks, and Romans, due to the convenience of using the human hand.
- Ancient Egypt & Mesopotamia: The span was used alongside the cubit and digit. The relationship (often 1 span = 1/2 cubit) was fundamental in their systems.
- Biblical References: The span is mentioned in the Bible (e.g., Exodus 28:16 describing the High Priest's breastplate, Goliath's height in some interpretations).
- Ancient Greece & Rome: Used as a practical subdivision of the cubit.
- Medieval Europe: Continued in informal use and sometimes appeared in texts defining lengths. In England, it was often standardized (unofficially) as 9 inches.
Like other anthropomorphic units, the span fell out of official use with the development and adoption of more standardized systems like the Imperial (inches, feet) and Metric (meters) systems, which provided necessary precision for trade, science, and industry.
The term "arpent" likely derives from the Gaulish arepennis, meaning "end of a field," suggesting its origins relate to agricultural land measurement, possibly representing the amount of land that could be plowed in a day. It became a fundamental unit for land surveying in France during the medieval period and remained in use until the adoption of the metric system following the French Revolution.
- Regional Variations: Before standardization efforts, the length (and thus area) of the arpent varied considerably across different regions of France. Key variations included:
- Arpent de Paris: Based on a perche (rod) of 18 pieds du Roi (French feet), with the linear arpent (side of the square) being 10 perches, totaling 180 pieds (~58.47 m). The area was 32,400 square pieds.
- Arpent Commun: Based on a perche of 20 pieds, linear arpent of 200 pieds (~64.97 m). Area: 40,000 square pieds.
- Arpent d'Ordonnance (or Arpent des Eaux et Forêts): Based on a perche of 22 pieds, linear arpent of 220 pieds (~71.47 m). Area: 48,400 square pieds. Used primarily for royal forests.
- Colonial Usage: The arpent was exported to French colonies, notably:
- New France (Quebec, Canada): The arpent de Paris became the standard for land grants along the St. Lawrence River, shaping the characteristic long, narrow farm plots (rangs).
- Louisiana (USA): The French arpent (usually the arpent de Paris) was used for land measurement before and sometimes after the Louisiana Purchase. Its legacy persists in land titles and some place names.
- Metrication: The metric system officially replaced the arpent and other traditional units in France in the late 18th and early 19th centuries, though its use lingered in practice and historical records.
Common Uses for spans and arpents
Explore the typical applications for both Span (imperial/US) and Arpent (imperial/US) to understand their common contexts.
Common Uses for spans
The span is now obsolete for precise or official measurements but is still encountered or used in specific contexts:
- Informal Estimation: Used for quick, rough measurements of moderate lengths where precision is not critical (e.g., gardening, crafts, estimating object sizes).
- Historical Texts: Found in ancient and medieval documents, requiring understanding for interpretation.
- Anthropology & Archaeology: Relevant when studying historical measurement systems or interpreting dimensions from ancient sites.
- Figurative Language: Can be used metaphorically to denote a small distance or extent ("life span").
- Understanding Historical Units: Key to grasping the relationship between units like the digit, palm, and cubit in ancient systems.
Common Uses for arpents
The Arpent (both linear and area) is now largely obsolete for practical measurement but remains historically significant:
- Historical Land Surveys: Essential for interpreting old maps, deeds, and land grants in France, Quebec, Louisiana, and other areas formerly under French control (e.g., parts of the US Midwest like Missouri, Illinois, Indiana).
- Legal Context: Land descriptions in some regions may still reference original measurements in arpents, requiring conversion for modern understanding.
- Historical Research: Understanding the arpent is crucial for historians studying agriculture, settlement patterns, and land tenure systems in French history and its colonial contexts.
- Unit of Area: While this page focuses on the length, the arpent is more commonly known and encountered as a unit of area (the square arpent).
Frequently Asked Questions
Questions About Span (span)
How long is a span?
There is no single, universally fixed length for a span because it's based on human hand size. However:
- A common historical and modern estimate is 9 inches (in).
- This is approximately 22.86 centimeters (cm) or 0.2286 meters (m).
- Historically, it was often defined as half a cubit, which varied (e.g., a common cubit of ~18 inches would yield a 9-inch span).
What is the relationship between a span and a cubit?
In many historical systems, a span was considered half (1/2) of a cubit. Since cubits themselves varied (e.g., common cubit vs. royal cubit), the exact length of the span derived this way also varied.
What is the relationship between a span and a palm or digit?
Common relationships, though varying by system, were:
- 1 span ≈ 3 palms (where a palm is the width of the hand).
- 1 span ≈ 12 digits (where a digit is the width of a finger).
Is the span an SI unit?
No, the span is not an SI unit. It is an ancient, non-standardized, anthropomorphic unit. The SI base unit for length is the meter (m).
Is the span still used today?
The span is not used for any official, scientific, or commercial measurements. Its use is limited to informal estimations, historical context, and figurative language. People might still use their own hand span for a quick size check.
Where does the name 'span' come from?
The word "span" comes from Old English spann, related to the verb spannan, meaning "to stretch, extend, or connect". This directly reflects the action of stretching the hand to measure the unit.
About Arpent (arpent)
Is the Arpent a unit of length or area?
The Arpent is primarily known as a unit of area, representing a specific parcel of land. However, a linear arpent also exists, defined as the side length of a square whose area is one arpent. This page focuses on the linear arpent. The relationship is direct: Area Arpent = (Linear Arpent)². Because the linear arpent varied, the area also varied.
Where is the Arpent still relevant?
The Arpent is not used for everyday measurements today. Its relevance is almost entirely historical and legal:
- Quebec (Canada): Crucial for understanding historical land division and property lines, especially the seigneurial system.
- Louisiana (USA): Important for interpreting land titles dating back to the French colonial period.
- France: Relevant for historical studies and understanding old documents.
- Other former French territories: May appear in historical records (e.g., Mauritius, parts of the US Midwest).
How long is a linear Arpent?
There is no single value, as it varied regionally. Common historical values include:
- Arpent de Paris: ~180 French feet ≈ 58.47 meters ≈ 191.8 feet (Most common in Quebec & Louisiana)
- Arpent Commun: ~200 French feet ≈ 64.97 meters ≈ 213.2 feet
- Arpent d'Ordonnance: ~220 French feet ≈ 71.47 meters ≈ 234.5 feet (Note: The French foot, pied du Roi, was slightly longer than the English foot, approx. 32.48 cm or 12.79 inches).
How does the linear Arpent compare to a Meter or Foot?
- The most common linear arpent (~58.47 m) is significantly longer than a meter. (1 Arpent ≈ 58.47 m)
- It is also much longer than a foot. (1 Arpent ≈ 191.8 ft)
Is the Arpent an SI unit?
No, the Arpent is not an SI unit. It is a traditional unit from the French system of measurements. The SI base unit for length is the meter (m), and the SI unit for area is the square meter (m²).
Conversion Table: Span to Arpent
| Span (span) | Arpent (arpent) |
|---|---|
| 1 | 0.004 |
| 5 | 0.02 |
| 10 | 0.039 |
| 25 | 0.098 |
| 50 | 0.196 |
| 100 | 0.391 |
| 500 | 1.955 |
| 1,000 | 3.91 |
All Length Conversions
Other Units from Length
- Meter (m)
- Kilometer (km)
- Hectometer (hm)
- Decimeter (dm)
- Centimeter (cm)
- Millimeter (mm)
- Inch (in)
- Foot (ft)
- Yard (yd)
- Mile (mi)
- Nautical Mile (NM)
- Micrometer (μm)
- Nanometer (nm)
- Light Year (ly)
- Astronomical Unit (AU)
- Parsec (pc)
- Angstrom (Å)
- Point (Typography) (pt)
- Mil/Thou (mil)
- Fathom (fath)
- Furlong (fur)
- Link (Gunter's) (li)
- Pace (pace)
- Digit (digit)
- Cable Length (cb)
- Ell (ell)
- Finger (finger)
- Roman Mile (m.p.)
- Stadion (stadion)
- Chi (Chinese) (chi)
- Shaku (Japanese) (shaku)
- Li (Chinese) (li)
- Toise (toise)
- Bolt (bolt)
- Rope (rope)
- Smoot (smoot)
- Sajene (sajene)
- Ken (ken)
- Wa (wa)
- Vara (vara)
- Aln (aln)
- Cubit (Royal/Egyptian) (cubit)
- Versta (versta)
- Ri (Japanese) (ri)
- Klafter (klafter)
- Yojana (yojana)
- Skein (skein)