Span to Cubit (Royal/Egyptian) Conversion Calculator: Free Online Tool
Convert spans to cubits with our free online length converter.
Span to Cubit (Royal/Egyptian) Calculator
How to Use the Calculator:
- Enter the value you want to convert in the 'From' field (Span).
- The converted value in Cubit (Royal/Egyptian) will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Span to Cubit (Royal/Egyptian)
Converting Span to Cubit (Royal/Egyptian) involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Span = 0.437094 cubitsExample Calculation:
Convert 10 spans: 10 × 0.437094 = 4.370937 cubits
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
What is a Span and a Cubit (Royal/Egyptian)?
The Span is an ancient unit of length based on the distance across an outstretched human hand, measured from the tip of the thumb to the tip of the little finger (or sometimes the index finger). As an anthropomorphic unit, its length was inherently variable, depending on the size of an individual's hand.
Historically, it was often defined in relation to other body-based units:
- Typically considered half a cubit.
- Often equated to 3 palms (where a palm is the width of the hand across the base of the fingers).
- Sometimes defined as 12 digits (fingerbreadths).
A common, though unofficial, modern estimate for a span is around 9 inches or approximately 22.86 centimeters (cm).
The Royal Cubit (Ancient Egyptian: meh nesut) was the primary ancient Egyptian standard unit of linear measure. It was based on the length of the forearm from the elbow to the tip of the extended middle finger, plus the width of the palm. It is considered one of the earliest attested standard units of measurement.
The Royal Cubit was typically divided into 7 palms (shesep), with each palm further divided into 4 digits or fingers (djeba), totaling 28 digits. Its length varied slightly over time and location but is generally accepted to be approximately 52.3 to 52.9 centimeters (about 20.6 to 20.8 inches). A common average value used is 0.524 meters.
A shorter Common Cubit or Short Cubit (Ancient Egyptian: meh sherer) also existed, measuring 6 palms (24 digits), approximately 45 cm.
Note: The Span is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Cubit (Royal/Egyptian) belongs to the imperial/US customary system.
History of the Span and Cubit (Royal/Egyptian)
The span is one of the oldest informal units of measurement, used by numerous ancient civilizations, including the Egyptians, Israelites, Greeks, and Romans, due to the convenience of using the human hand.
- Ancient Egypt & Mesopotamia: The span was used alongside the cubit and digit. The relationship (often 1 span = 1/2 cubit) was fundamental in their systems.
- Biblical References: The span is mentioned in the Bible (e.g., Exodus 28:16 describing the High Priest's breastplate, Goliath's height in some interpretations).
- Ancient Greece & Rome: Used as a practical subdivision of the cubit.
- Medieval Europe: Continued in informal use and sometimes appeared in texts defining lengths. In England, it was often standardized (unofficially) as 9 inches.
Like other anthropomorphic units, the span fell out of official use with the development and adoption of more standardized systems like the Imperial (inches, feet) and Metric (meters) systems, which provided necessary precision for trade, science, and industry.
The Royal Cubit emerged very early in Egyptian history, likely during the Predynastic or Early Dynastic Period (before 3000 BCE). Its standardization was crucial for the large-scale construction projects undertaken by the pharaohs.
- Early Standardization: It represents one of history's first successful attempts at creating and maintaining a standard unit of length, essential for architectural precision and administrative consistency.
- Cubit Rods: Physical standards, known as cubit rods, were created from durable materials like wood, slate, or granite. These rods were often inscribed with subdivisions (palms, digits, and sometimes fractions of digits) and sometimes bore dedications or official insignia. Examples have been found in tombs, such as that of Tutankhamun, and likely served as official benchmarks.
- Monumental Construction: The Royal Cubit was the fundamental unit used in the design and construction of temples, palaces, and most famously, the pyramids. The precise dimensions of structures like the Great Pyramid of Giza reflect careful measurement using this standard.
- Longevity: The Royal Cubit remained the standard measure in Egypt for millennia, from the Old Kingdom through the Ptolemaic period and into Roman times, demonstrating remarkable stability.
Common Uses for spans and cubits
Explore the typical applications for both Span (imperial/US) and Cubit (Royal/Egyptian) (imperial/US) to understand their common contexts.
Common Uses for spans
The span is now obsolete for precise or official measurements but is still encountered or used in specific contexts:
- Informal Estimation: Used for quick, rough measurements of moderate lengths where precision is not critical (e.g., gardening, crafts, estimating object sizes).
- Historical Texts: Found in ancient and medieval documents, requiring understanding for interpretation.
- Anthropology & Archaeology: Relevant when studying historical measurement systems or interpreting dimensions from ancient sites.
- Figurative Language: Can be used metaphorically to denote a small distance or extent ("life span").
- Understanding Historical Units: Key to grasping the relationship between units like the digit, palm, and cubit in ancient systems.
Common Uses for cubits
The Royal Cubit was integral to many aspects of ancient Egyptian society:
- Architecture and Construction: Defining building dimensions, column heights, room layouts, and overall structural proportions.
- Land Surveying: Measuring fields for agriculture, taxation, and property boundaries, especially after the annual Nile flood receded.
- Record Keeping: Used in administrative documents, inventories, and calculations.
- Craftsmanship: Measuring materials like stone blocks, timber, rope, and textiles.
- Art and Iconography: Used to establish proportions in statues and reliefs according to canonical rules.
- Religious and Funerary Contexts: Cubit rods were sometimes included in tomb equipment, possibly symbolizing order and correctness or serving a practical purpose in the afterlife.
- Historical Texts: The term "cubit" appears in various ancient texts, including the Bible, though the specific length intended (Egyptian Royal, common, Babylonian, etc.) can be context-dependent.
Frequently Asked Questions
Questions About Span (span)
How long is a span?
There is no single, universally fixed length for a span because it's based on human hand size. However:
- A common historical and modern estimate is 9 inches (in).
- This is approximately 22.86 centimeters (cm) or 0.2286 meters (m).
- Historically, it was often defined as half a cubit, which varied (e.g., a common cubit of ~18 inches would yield a 9-inch span).
What is the relationship between a span and a cubit?
In many historical systems, a span was considered half (1/2) of a cubit. Since cubits themselves varied (e.g., common cubit vs. royal cubit), the exact length of the span derived this way also varied.
What is the relationship between a span and a palm or digit?
Common relationships, though varying by system, were:
- 1 span ≈ 3 palms (where a palm is the width of the hand).
- 1 span ≈ 12 digits (where a digit is the width of a finger).
Is the span an SI unit?
No, the span is not an SI unit. It is an ancient, non-standardized, anthropomorphic unit. The SI base unit for length is the meter (m).
Is the span still used today?
The span is not used for any official, scientific, or commercial measurements. Its use is limited to informal estimations, historical context, and figurative language. People might still use their own hand span for a quick size check.
Where does the name 'span' come from?
The word "span" comes from Old English spann, related to the verb spannan, meaning "to stretch, extend, or connect". This directly reflects the action of stretching the hand to measure the unit.
About Cubit (Royal/Egyptian) (cubit)
How was the Royal Cubit standardized?
Standardization was achieved through the creation and maintenance of master cubit rods. These physical exemplars, often made of durable stone like granite, were likely kept in major temples or administrative centers. Officials and craftsmen would use copies made from these masters for practical work. The rods themselves were meticulously marked with the primary divisions of 7 palms and 28 digits, often including finer subdivisions. This system ensured consistency across large projects and different regions of the kingdom.
What is the difference between a short cubit and a royal cubit?
The two main cubit measures in ancient Egypt were:
- Short Cubit (meh sherer): Measured 6 palms (24 digits), approximately 44.7 to 45 cm (around 17.6 inches). It represented the distance from the elbow to the tip of the thumb or closed fist. It was likely used for more common, everyday measurements of cloth, goods, or smaller objects.
- Royal Cubit (meh nesut): Measured 7 palms (28 digits), approximately 52.3 to 52.9 cm (around 20.6 inches). It was the length from the elbow to the tip of the middle finger plus one palm width. This was the official standard used for monumental architecture, land surveying, and significant state projects. It likely held a higher status and was associated with the pharaoh and divine order.
How long was the Royal Cubit?
The Royal Cubit was approximately:
- 0.523 to 0.529 meters (m)
- 52.3 to 52.9 centimeters (cm)
- 20.6 to 20.8 inches (in)
- Roughly 1.72 feet (ft)
A value of 0.524 m is often used as a representative average.
Is the Cubit still used today?
No, the ancient Egyptian Cubit (both Royal and short) is obsolete. It has not been in practical use for centuries, having been replaced by other measurement systems and ultimately by the metric system. Its relevance today is purely historical, archaeological, and academic.
Is the Cubit an SI unit?
No, the Cubit is not an SI unit. It is an ancient, traditional unit of measurement originating in Egypt. The SI base unit for length is the meter (m).
Conversion Table: Span to Cubit (Royal/Egyptian)
| Span (span) | Cubit (Royal/Egyptian) (cubit) |
|---|---|
| 1 | 0.437 |
| 5 | 2.186 |
| 10 | 4.371 |
| 25 | 10.927 |
| 50 | 21.855 |
| 100 | 43.709 |
| 500 | 218.547 |
| 1,000 | 437.094 |
All Length Conversions
Other Units from Length
- Meter (m)
- Kilometer (km)
- Hectometer (hm)
- Decimeter (dm)
- Centimeter (cm)
- Millimeter (mm)
- Inch (in)
- Foot (ft)
- Yard (yd)
- Mile (mi)
- Nautical Mile (NM)
- Micrometer (μm)
- Nanometer (nm)
- Light Year (ly)
- Astronomical Unit (AU)
- Parsec (pc)
- Angstrom (Å)
- Point (Typography) (pt)
- Mil/Thou (mil)
- Fathom (fath)
- Furlong (fur)
- Link (Gunter's) (li)
- Pace (pace)
- Digit (digit)
- Cable Length (cb)
- Ell (ell)
- Finger (finger)
- Roman Mile (m.p.)
- Stadion (stadion)
- Chi (Chinese) (chi)
- Shaku (Japanese) (shaku)
- Li (Chinese) (li)
- Toise (toise)
- Bolt (bolt)
- Rope (rope)
- Smoot (smoot)
- Sajene (sajene)
- Ken (ken)
- Wa (wa)
- Vara (vara)
- Aln (aln)
- Versta (versta)
- Arpent (arpent)
- Ri (Japanese) (ri)
- Klafter (klafter)
- Yojana (yojana)
- Skein (skein)