Span to Klafter Conversion Calculator: Free Online Tool
Convert spans to klafter with our free online length converter.
Span to Klafter Calculator
How to Use the Calculator:
- Enter the value you want to convert in the 'From' field (Span).
- The converted value in Klafter will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Span to Klafter
Converting Span to Klafter involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Span = 0.120538 klafterExample Calculation:
Convert 10 spans: 10 × 0.120538 = 1.205378 klafter
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
What is a Span and a Klafter?
The Span is an ancient unit of length based on the distance across an outstretched human hand, measured from the tip of the thumb to the tip of the little finger (or sometimes the index finger). As an anthropomorphic unit, its length was inherently variable, depending on the size of an individual's hand.
Historically, it was often defined in relation to other body-based units:
- Typically considered half a cubit.
- Often equated to 3 palms (where a palm is the width of the hand across the base of the fingers).
- Sometimes defined as 12 digits (fingerbreadths).
A common, though unofficial, modern estimate for a span is around 9 inches or approximately 22.86 centimeters (cm).
The Klafter is a historical unit of length originating from Central Europe, particularly prominent in German-speaking regions like Austria, Bavaria, Prussia, and Switzerland. It is conceptually similar to the fathom, often defined by the span of a person's outstretched arms.
While its exact length varied significantly by region and time, a widely recognized standard, especially from the Austrian Empire, defines the Klafter as 6 Vienna feet (Wiener Fuß). This equates to approximately:
- 1.8965 meters (m)
- 6.222 feet (ft) (using the Vienna foot of ~0.31608 m)
The Klafter was also used as a unit of area (Quadratklafter or square Klafter) and volume (Kubikklafter or cubic Klafter), especially for measuring firewood (often called a Raummeter or Ster in this context, though volumes could vary). This page focuses on the linear Klafter.
Note: The Span is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Klafter belongs to the imperial/US customary system.
History of the Span and Klafter
The span is one of the oldest informal units of measurement, used by numerous ancient civilizations, including the Egyptians, Israelites, Greeks, and Romans, due to the convenience of using the human hand.
- Ancient Egypt & Mesopotamia: The span was used alongside the cubit and digit. The relationship (often 1 span = 1/2 cubit) was fundamental in their systems.
- Biblical References: The span is mentioned in the Bible (e.g., Exodus 28:16 describing the High Priest's breastplate, Goliath's height in some interpretations).
- Ancient Greece & Rome: Used as a practical subdivision of the cubit.
- Medieval Europe: Continued in informal use and sometimes appeared in texts defining lengths. In England, it was often standardized (unofficially) as 9 inches.
Like other anthropomorphic units, the span fell out of official use with the development and adoption of more standardized systems like the Imperial (inches, feet) and Metric (meters) systems, which provided necessary precision for trade, science, and industry.
The term "Klafter" likely derives from Old High German klāftra, related to the act of embracing or grasping, reflecting its origin as an anthropometric unit based on arm span.
- Regional Variations: Before widespread standardization and metrication, the length of the Klafter differed across various German states and Swiss cantons. For example, the Prussian Klafter was slightly different from the Austrian one.
- Standardization Efforts: Attempts were made to standardize measures, with the Austrian system (based on the Wiener Fuß) becoming influential. The definition of 1 Klafter = 6 Fuß (feet) = 72 Zoll (inches) was common, but the length of the Fuß itself varied.
- Dual Use (Length & Volume): The Klafter was notably used for measuring stacked firewood. A Klafter Holz typically referred to a stack of wood 1 Klafter high, 1 Klafter wide, and a specific log length (often 3 or 4 feet), representing a volume unit.
- Metrication: The Klafter became obsolete following the adoption of the metric system across Central Europe, primarily during the latter half of the 19th century (e.g., Germany 1872, Austria 1876).
Common Uses for spans and klafter
Explore the typical applications for both Span (imperial/US) and Klafter (imperial/US) to understand their common contexts.
Common Uses for spans
The span is now obsolete for precise or official measurements but is still encountered or used in specific contexts:
- Informal Estimation: Used for quick, rough measurements of moderate lengths where precision is not critical (e.g., gardening, crafts, estimating object sizes).
- Historical Texts: Found in ancient and medieval documents, requiring understanding for interpretation.
- Anthropology & Archaeology: Relevant when studying historical measurement systems or interpreting dimensions from ancient sites.
- Figurative Language: Can be used metaphorically to denote a small distance or extent ("life span").
- Understanding Historical Units: Key to grasping the relationship between units like the digit, palm, and cubit in ancient systems.
Common Uses for klafter
Historically, the Klafter served various measurement needs:
- Forestry: Measuring timber lengths and, crucially, the volume of stacked firewood.
- Mining: Measuring the depth of shafts and the length of tunnels.
- Construction: Measuring building dimensions, rope lengths, and materials.
- Surveying: Measuring land distances and areas (Quadratklafter), although units like the Ruthe (rod) were also common for land.
- Nautical: Sometimes used similarly to a fathom for measuring water depth or rope lengths, though less common than the English fathom in maritime contexts.
Today, its use is confined to historical records, architectural studies, forestry history, and understanding old land deeds or documents.
Frequently Asked Questions
Questions About Span (span)
How long is a span?
There is no single, universally fixed length for a span because it's based on human hand size. However:
- A common historical and modern estimate is 9 inches (in).
- This is approximately 22.86 centimeters (cm) or 0.2286 meters (m).
- Historically, it was often defined as half a cubit, which varied (e.g., a common cubit of ~18 inches would yield a 9-inch span).
What is the relationship between a span and a cubit?
In many historical systems, a span was considered half (1/2) of a cubit. Since cubits themselves varied (e.g., common cubit vs. royal cubit), the exact length of the span derived this way also varied.
What is the relationship between a span and a palm or digit?
Common relationships, though varying by system, were:
- 1 span ≈ 3 palms (where a palm is the width of the hand).
- 1 span ≈ 12 digits (where a digit is the width of a finger).
Is the span an SI unit?
No, the span is not an SI unit. It is an ancient, non-standardized, anthropomorphic unit. The SI base unit for length is the meter (m).
Is the span still used today?
The span is not used for any official, scientific, or commercial measurements. Its use is limited to informal estimations, historical context, and figurative language. People might still use their own hand span for a quick size check.
Where does the name 'span' come from?
The word "span" comes from Old English spann, related to the verb spannan, meaning "to stretch, extend, or connect". This directly reflects the action of stretching the hand to measure the unit.
About Klafter (klafter)
How long is a Klafter?
The length varied, but the most common standard, based on the Austrian system, is:
- Exactly 6 Vienna Feet (Wiener Fuß)
- Approximately 1.8965 meters
- Approximately 6.222 feet
Other historical values might range roughly from 1.7 to 1.95 meters depending on the specific regional "foot" standard used.
Is a Klafter the same as a fathom?
Conceptually, they are very similar, both derived from the span of outstretched arms. Numerically, they are close but distinct.
- Klafter (Austrian): ~1.8965 meters / ~6.222 feet
- Fathom (International): Exactly 1.8288 meters / 6 feet
So, the common Austrian Klafter was slightly longer than the standard fathom.
What were the main related units in the Austrian system?
The Klafter was part of a system:
- 1 Klafter = 6 Fuß (Vienna Foot or Wiener Schuh)
- 1 Fuß = 12 Zoll (Vienna Inch or Wiener Zoll)
- 1 Zoll ≈ 2.634 cm / 1.037 inches
- 1 Fuß ≈ 31.608 cm / 12.444 inches / 1.037 feet
Where was the Klafter primarily used?
It was used across Central Europe, notably in:
- Austria-Hungary
- Southern German states (Bavaria, Württemberg)
- Prussia (with a slightly different length)
- Switzerland
- Other parts of the Holy Roman Empire and subsequent German Confederation.
Is the Klafter still used today?
No, the Klafter is obsolete for practical measurements. It was replaced by the meter during metrication in the 19th century. Its relevance is purely historical.
How does a Klafter compare to a meter or foot?
- A Klafter (~1.9 m) is almost twice as long as a meter. (1 Klafter ≈ 1.9 m)
- A Klafter (~6.2 ft) is significantly longer than a standard foot. (1 Klafter ≈ 6.2 ft)
Is the Klafter an SI unit?
No, the Klafter is not an SI unit. It is a traditional unit from historical Central European measurement systems. The SI base unit for length is the meter (m).
Conversion Table: Span to Klafter
| Span (span) | Klafter (klafter) |
|---|---|
| 1 | 0.121 |
| 5 | 0.603 |
| 10 | 1.205 |
| 25 | 3.013 |
| 50 | 6.027 |
| 100 | 12.054 |
| 500 | 60.269 |
| 1,000 | 120.538 |
All Length Conversions
Other Units from Length
- Meter (m)
- Kilometer (km)
- Hectometer (hm)
- Decimeter (dm)
- Centimeter (cm)
- Millimeter (mm)
- Inch (in)
- Foot (ft)
- Yard (yd)
- Mile (mi)
- Nautical Mile (NM)
- Micrometer (μm)
- Nanometer (nm)
- Light Year (ly)
- Astronomical Unit (AU)
- Parsec (pc)
- Angstrom (Å)
- Point (Typography) (pt)
- Mil/Thou (mil)
- Fathom (fath)
- Furlong (fur)
- Link (Gunter's) (li)
- Pace (pace)
- Digit (digit)
- Cable Length (cb)
- Ell (ell)
- Finger (finger)
- Roman Mile (m.p.)
- Stadion (stadion)
- Chi (Chinese) (chi)
- Shaku (Japanese) (shaku)
- Li (Chinese) (li)
- Toise (toise)
- Bolt (bolt)
- Rope (rope)
- Smoot (smoot)
- Sajene (sajene)
- Ken (ken)
- Wa (wa)
- Vara (vara)
- Aln (aln)
- Cubit (Royal/Egyptian) (cubit)
- Versta (versta)
- Arpent (arpent)
- Ri (Japanese) (ri)
- Yojana (yojana)
- Skein (skein)