Versta to Cable Length Converter
Convert versts to cable lengths with our free online length converter.
Quick Answer
1 Versta = 5.760259 cable lengths
Formula: Versta × conversion factor = Cable Length
Use the calculator below for instant, accurate conversions.
Our Accuracy Guarantee
All conversion formulas on UnitsConverter.io have been verified against NIST (National Institute of Standards and Technology) guidelines and international SI standards. Our calculations are accurate to 10 decimal places for standard conversions and use arbitrary precision arithmetic for astronomical units.
Versta to Cable Length Calculator
How to Use the Versta to Cable Length Calculator:
- Enter the value you want to convert in the 'From' field (Versta).
- The converted value in Cable Length will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Versta to Cable Length: Step-by-Step Guide
Converting Versta to Cable Length involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Versta = 5.760259 cable lengthsExample Calculation:
Convert 10 versts: 10 × 5.760259 = 57.60259 cable lengths
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
Need to convert to other length units?
View all Length conversions →What is a Versta and a Cable Length?
The Versta (Russian: верста́, plural: вёрсты, vyorsty) is an obsolete Russian unit of length or distance. It was defined as being equal to 500 sazhenes (саже́нь).
Based on the standardized sajene of 7 English feet (2.1336 meters) established under Peter the Great, one Versta is equal to:
- 1066.8 meters (m)
- 1.0668 kilometers (km)
- Approximately 3500 feet (ft)
- Approximately 0.6629 miles (mi)
A Cable Length (symbol cb), often shortened to cable, is a nautical unit of length, traditionally related to the length of a ship's anchor cable. While its exact length has varied historically and geographically, it is now most commonly defined internationally as one-tenth of a nautical mile (1/10 NM).
This standard definition equates to:
- 185.2 meters (m)
- Approximately 607.61 feet (ft)
- Approximately 202.54 yards (yd)
Other historical definitions based on the fathom also exist.
Note: The Versta is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Cable Length belongs to the imperial/US customary system.
History of the Versta and Cable Length
The Versta was a traditional unit of distance in Russia, used since at least the 11th century. Its length varied historically until Peter the Great standardized the Russian system of measures in the 18th century, linking the sajene to the English foot (1 sajene = 7 feet). This fixed the Versta at 500 * 7 = 3500 feet, or 1066.8 meters.
- Imperial Russia: The Versta became the standard unit for measuring road distances throughout the Russian Empire. Roads were often marked with verst posts (верстово́й столб, verstovoy stolb) indicating distances.
- Mezhevaya Versta: A less common "boundary versta" (межева́я верста́, mezhevaya versta) also existed, primarily for land surveying. It was twice as long, equal to 1000 sazhenes (approximately 2.13 km). Unless specified otherwise, "Versta" usually refers to the standard 500-sajene unit.
- Metrication: The Versta became obsolete after the Russian Revolution. The metric system was officially adopted in 1918 and became mandatory in 1925, replacing the traditional Russian units.
The unit originated from the practical length of a ship's anchor cable (or "shot" of chain) used in the age of sail. Anchor cables were typically manufactured in standard lengths that could be shackled together. This length provided a convenient unit for measuring distances related to anchoring and maneuvering close to shore or other vessels.
However, the length was not universally standardized:
- In the British Royal Navy, a cable was traditionally defined as 100 fathoms (equivalent to 600 feet or 182.88 meters).
- In the U.S. Navy, it was often defined as 120 fathoms (equivalent to 720 feet or 219.456 meters).
With the international adoption of the nautical mile (defined as 1852 meters), defining the cable as exactly one-tenth of this value (185.2 m) created a convenient, decimal-based relationship and became the most common modern standard, sometimes referred to as the "international cable length".
Common Uses and Applications: versts vs cable lengths
Explore the typical applications for both Versta (imperial/US) and Cable Length (imperial/US) to understand their common contexts.
Common Uses for versts
The Versta was primarily used for:
- Measuring Travel Distances: It was the standard unit for road distances between towns and cities in Imperial Russia. Maps, travel guides, and road markers all used Versts.
- Postal System: Distances for mail delivery and stagecoach routes were measured in Versts.
- Literature: The Versta frequently appears in Russian literature of the 18th and 19th centuries (e.g., works by Pushkin, Gogol, Tolstoy, Chekhov) to describe journeys and distances, adding historical context.
- Military: Used for measuring marching distances and geographical surveys.
Its use today is purely historical or literary.
When to Use cable lengths
The cable length, particularly the 1/10 NM definition, remains in use in specific maritime contexts:
- Nautical Navigation & Ship Handling: Measuring short distances at sea, such as the distance between ships in formation, distance off a navigational hazard, distance to a pier, estimating anchor drag, or describing the scope (length) of anchor cable paid out.
- Hydrographic Surveying: Historically used on nautical charts, although meters are now the primary international standard for depth and short distances on modern charts.
- Naval Terminology: Persists in naval traditions and communications for describing close ranges.
- Historical Context: Encountered in older maritime texts, logs, charts, and naval records.
Additional Unit Information
About Versta (versta)
How long is a Versta?
A standard Versta is exactly:
- 1066.8 meters
- 1.0668 kilometers
- Approximately 0.6629 miles
- Approximately 3500 feet
- Exactly 500 sazhenes
What were the main related Russian units?
The Versta was part of the Imperial Russian system of measures:
- 1 Versta = 500 Sajenes (саже́нь)
- 1 Sajene = 3 Arshins (арши́н) ≈ 2.13 m / 7 ft
- 1 Arshin = 16 Vershoks (вершо́к) ≈ 71.1 cm / 28 in
- 1 Vershok ≈ 4.445 cm / 1.75 in
Was there more than one type of Versta?
Yes, besides the standard "travel" Versta (500 sazhenes), there was a Mezhevaya Versta ("boundary versta") used for land surveying, which was equal to 1000 sazhenes (about 2.13 km). The 500-sajene Versta was far more common.
Is the Versta still used today?
No, the Versta is obsolete. It was officially replaced by the kilometer and meter when Russia adopted the metric system in the early 20th century (mandatory from 1925). Its use is now confined to historical contexts and literature.
How does a Versta compare to a kilometer or a mile?
- A Versta is slightly longer than a kilometer: 1 Versta ≈ 1.07 km.
- A Versta is significantly shorter than a mile: 1 Versta ≈ 0.66 miles (roughly two-thirds of a mile). Conversely, 1 mile ≈ 1.51 Versts.
Is the Versta an SI unit?
No, the Versta is not an SI unit. It is a traditional unit from the historical Russian system of measurement. The SI base unit for length is the meter (m).
About Cable Length (cb)
What are the different values for a cable length?
The value depends on the definition being used:
- International Standard: 1 cable = 1/10 nautical mile = 185.2 meters ≈ 607.61 feet. (Most common modern definition)
- British Traditional: 1 cable = 100 fathoms = 182.88 meters = 600 feet.
- US Traditional: 1 cable = 120 fathoms = 219.456 meters = 720 feet.
Always clarify which definition is intended if precision is critical, though the 1/10 NM version is generally assumed today unless otherwise specified.
How many meters are in a standard cable length?
The internationally recognized standard cable length is exactly 185.2 meters.
How many feet are in a standard cable length?
The internationally recognized standard cable length is approximately 607.61 feet. The traditional British cable was 600 ft, and the traditional US cable was 720 ft.
Is the cable length related to the nautical mile?
Yes, the most common modern definition establishes a direct relationship: 1 cable length = 1/10 nautical mile.
Is the cable length an SI unit?
No, the cable length is not an SI unit. It is a traditional nautical unit derived from maritime practice and later linked to the nautical mile. The corresponding SI unit for length is the meter (m).
Is the cable length still used today?
Yes, while meters and nautical miles are standard for most navigation, the cable length (especially the 1/10 NM definition) is still actively used in specific maritime applications like anchoring, close maneuvering, naval operations, and sometimes in recreational boating contexts. It serves as a convenient subdivision of the nautical mile.
Conversion Table: Versta to Cable Length
| Versta (versta) | Cable Length (cb) |
|---|---|
| 0.5 | 2.88 |
| 1 | 5.76 |
| 1.5 | 8.64 |
| 2 | 11.521 |
| 5 | 28.801 |
| 10 | 57.603 |
| 25 | 144.007 |
| 50 | 288.013 |
| 100 | 576.026 |
| 250 | 1,440.065 |
| 500 | 2,880.13 |
| 1,000 | 5,760.259 |
People Also Ask
How do I convert Versta to Cable Length?
To convert Versta to Cable Length, enter the value in Versta in the calculator above. The conversion will happen automatically. Use our free online converter for instant and accurate results. You can also visit our length converter page to convert between other units in this category.
Learn more →What is the conversion factor from Versta to Cable Length?
The conversion factor depends on the specific relationship between Versta and Cable Length. You can find the exact conversion formula and factor on this page. Our calculator handles all calculations automatically. See the conversion table above for common values.
Can I convert Cable Length back to Versta?
Yes! You can easily convert Cable Length back to Versta by using the swap button (⇌) in the calculator above, or by visiting our Cable Length to Versta converter page. You can also explore other length conversions on our category page.
Learn more →What are common uses for Versta and Cable Length?
Versta and Cable Length are both standard units used in length measurements. They are commonly used in various applications including engineering, construction, cooking, and scientific research. Browse our length converter for more conversion options.
For more length conversion questions, visit our FAQ page or explore our conversion guides.
Helpful Conversion Guides
Learn more about unit conversion with our comprehensive guides:
📚 How to Convert Units
Step-by-step guide to unit conversion with practical examples.
🔢 Conversion Formulas
Essential formulas for length and other conversions.
⚖️ Metric vs Imperial
Understand the differences between measurement systems.
⚠️ Common Mistakes
Learn about frequent errors and how to avoid them.
All Length Conversions
Other Length Units and Conversions
Explore other length units and their conversion options:
- Meter (m) • Versta to Meter
- Kilometer (km) • Versta to Kilometer
- Hectometer (hm) • Versta to Hectometer
- Decimeter (dm) • Versta to Decimeter
- Centimeter (cm) • Versta to Centimeter
- Millimeter (mm) • Versta to Millimeter
- Inch (in) • Versta to Inch
- Foot (ft) • Versta to Foot
- Yard (yd) • Versta to Yard
- Mile (mi) • Versta to Mile
Verified Against Authority Standards
All conversion formulas have been verified against international standards and authoritative sources to ensure maximum accuracy and reliability.
National Institute of Standards and Technology — Official US standards for length measurements
Bureau International des Poids et Mesures — International System of Units official documentation
Last verified: December 3, 2025