Wa to Cable Length Conversion Calculator: Free Online Tool
Convert wa to cable lengths with our free online length converter.
Wa to Cable Length Calculator
How to Use the Calculator:
- Enter the value you want to convert in the 'From' field (Wa).
- The converted value in Cable Length will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Wa to Cable Length
Converting Wa to Cable Length involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Wa = 0.0107991 cable lengthsExample Calculation:
Convert 10 wa: 10 × 0.0107991 = 0.107991 cable lengths
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
What is a Wa and a Cable Length?
The Wa (วา) is a traditional Thai unit of length. It is legally defined in relation to the metric system as exactly 2 meters.
The Wa serves as a fundamental unit within the traditional Thai system of measurement, particularly for land area. It is roughly equivalent to the distance between a person's outstretched fingertips when their arms are extended horizontally to the sides (similar to a fathom).
A Cable Length (symbol cb), often shortened to cable, is a nautical unit of length, traditionally related to the length of a ship's anchor cable. While its exact length has varied historically and geographically, it is now most commonly defined internationally as one-tenth of a nautical mile (1/10 NM).
This standard definition equates to:
- 185.2 meters (m)
- Approximately 607.61 feet (ft)
- Approximately 202.54 yards (yd)
Other historical definitions based on the fathom also exist.
Note: The Wa is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Cable Length belongs to the imperial/US customary system.
History of the Wa and Cable Length
The Wa has been used in Thailand (formerly Siam) for centuries, likely originating from anthropomorphic measurements like the arm span. It was a practical unit for everyday measurements, construction, and land surveying.
- Traditional System: The Wa was part of a system that included smaller units like the khuep (span, ~25 cm), sok (cubit, ~50 cm, 1 Wa = 4 Sok), and larger units like the sen (rope, 1 Sen = 20 Wa).
- Standardization: During the modernization reforms under King Chulalongkorn (Rama V) in the late 19th and early 20th centuries, Thailand began standardizing its weights and measures. The Weights and Measures Act of 1923 formally defined traditional units in terms of the metric system. The Wa was officially set at exactly 2 meters.
- Metrication: While Thailand officially adopted the metric system as its primary standard, traditional units like the Wa remain legally defined and widely used, especially in specific contexts like land measurement.
The unit originated from the practical length of a ship's anchor cable (or "shot" of chain) used in the age of sail. Anchor cables were typically manufactured in standard lengths that could be shackled together. This length provided a convenient unit for measuring distances related to anchoring and maneuvering close to shore or other vessels.
However, the length was not universally standardized:
- In the British Royal Navy, a cable was traditionally defined as 100 fathoms (equivalent to 600 feet or 182.88 meters).
- In the U.S. Navy, it was often defined as 120 fathoms (equivalent to 720 feet or 219.456 meters).
With the international adoption of the nautical mile (defined as 1852 meters), defining the cable as exactly one-tenth of this value (185.2 m) created a convenient, decimal-based relationship and became the most common modern standard, sometimes referred to as the "international cable length".
Common Uses for wa and cable lengths
Explore the typical applications for both Wa (imperial/US) and Cable Length (imperial/US) to understand their common contexts.
Common Uses for wa
The Wa's most significant modern use is in land measurement, but it historically had broader applications:
- Land Area: This is the most common contemporary use. Land area in Thailand is almost exclusively measured in Tarang Wa (ตารางวา - Square Wa).
- 1 Tarang Wa = 4 square meters (2m x 2m)
- 1 Ngan (งาน) = 100 Tarang Wa (400 sq m)
- 1 Rai (ไร่) = 4 Ngan = 400 Tarang Wa (1600 sq m) Property deeds, real estate listings, and land surveys invariably use Rai, Ngan, and Tarang Wa.
- Length Measurement: While meters are now standard for most length measurements (textiles, construction materials), the Wa might still be used informally or in traditional contexts. Historically, it was used for measuring distances, building dimensions, rope lengths, etc.
- Construction & Architecture: Traditionally used for laying out building plots and determining dimensions in Thai architecture.
- Cultural Context: Understanding the Wa and its related area units is essential for navigating real estate, agriculture, and historical contexts in Thailand.
Common Uses for cable lengths
The cable length, particularly the 1/10 NM definition, remains in use in specific maritime contexts:
- Nautical Navigation & Ship Handling: Measuring short distances at sea, such as the distance between ships in formation, distance off a navigational hazard, distance to a pier, estimating anchor drag, or describing the scope (length) of anchor cable paid out.
- Hydrographic Surveying: Historically used on nautical charts, although meters are now the primary international standard for depth and short distances on modern charts.
- Naval Terminology: Persists in naval traditions and communications for describing close ranges.
- Historical Context: Encountered in older maritime texts, logs, charts, and naval records.
Frequently Asked Questions
Questions About Wa (wa)
How long is a Wa?
A Wa is defined as exactly:
- 2 meters (m)
- 200 centimeters (cm)
- Approximately 6.5617 feet (ft)
- Approximately 78.74 inches (in)
What are the related traditional Thai length units?
The Wa fits into a system, often based on factors of 2 and 10:
- Smaller Units:
- 1 Wa = 4 Sok (ศอก - cubit, ~50 cm)
- 1 Sok = 2 Khuep (คืบ - span, ~25 cm)
- 1 Khuep = 12 Nio (นิ้ว - finger breadth, ~2.08 cm, not the English inch)
- Larger Unit:
- 1 Sen (เส้น - rope/chain) = 20 Wa (40 meters)
- 1 Yot (โยชน์ - league) = 400 Sen (16 kilometers)
How is the Wa used for area measurement?
The primary unit for land area is the Tarang Wa (Square Wa):
- 1 Tarang Wa = 1 Wa × 1 Wa = 2 m × 2 m = 4 square meters Larger area units are based on the Tarang Wa:
- 1 Ngan = 100 Tarang Wa (400 m²)
- 1 Rai = 4 Ngan = 400 Tarang Wa (1600 m²)
- (For reference, 1 Acre ≈ 2.53 Rai, 1 Hectare = 6.25 Rai)
Is the Wa an SI unit?
No, the Wa is not an SI unit. It is a traditional Thai unit, although its legal definition is based on the SI unit, the meter (m).
Is the Wa still used today?
Yes, absolutely. While the metric system is the official standard for science, commerce, and industry, the Wa (especially as Tarang Wa for area) remains the standard unit for land measurement in Thailand. It is legally recognized and used in all official land documents and real estate transactions. Its use for linear measurement is less common but may still occur informally or in traditional settings.
About Cable Length (cb)
What are the different values for a cable length?
The value depends on the definition being used:
- International Standard: 1 cable = 1/10 nautical mile = 185.2 meters ≈ 607.61 feet. (Most common modern definition)
- British Traditional: 1 cable = 100 fathoms = 182.88 meters = 600 feet.
- US Traditional: 1 cable = 120 fathoms = 219.456 meters = 720 feet.
Always clarify which definition is intended if precision is critical, though the 1/10 NM version is generally assumed today unless otherwise specified.
How many meters are in a standard cable length?
The internationally recognized standard cable length is exactly 185.2 meters.
How many feet are in a standard cable length?
The internationally recognized standard cable length is approximately 607.61 feet. The traditional British cable was 600 ft, and the traditional US cable was 720 ft.
Is the cable length related to the nautical mile?
Yes, the most common modern definition establishes a direct relationship: 1 cable length = 1/10 nautical mile.
Is the cable length an SI unit?
No, the cable length is not an SI unit. It is a traditional nautical unit derived from maritime practice and later linked to the nautical mile. The corresponding SI unit for length is the meter (m).
Is the cable length still used today?
Yes, while meters and nautical miles are standard for most navigation, the cable length (especially the 1/10 NM definition) is still actively used in specific maritime applications like anchoring, close maneuvering, naval operations, and sometimes in recreational boating contexts. It serves as a convenient subdivision of the nautical mile.
Conversion Table: Wa to Cable Length
| Wa (wa) | Cable Length (cb) |
|---|---|
| 1 | 0.011 |
| 5 | 0.054 |
| 10 | 0.108 |
| 25 | 0.27 |
| 50 | 0.54 |
| 100 | 1.08 |
| 500 | 5.4 |
| 1,000 | 10.799 |
All Length Conversions
Other Units from Length
- Meter (m)
- Kilometer (km)
- Hectometer (hm)
- Decimeter (dm)
- Centimeter (cm)
- Millimeter (mm)
- Inch (in)
- Foot (ft)
- Yard (yd)
- Mile (mi)
- Nautical Mile (NM)
- Micrometer (μm)
- Nanometer (nm)
- Light Year (ly)
- Astronomical Unit (AU)
- Parsec (pc)
- Angstrom (Å)
- Point (Typography) (pt)
- Mil/Thou (mil)
- Fathom (fath)
- Furlong (fur)
- Link (Gunter's) (li)
- Pace (pace)
- Span (span)
- Digit (digit)
- Ell (ell)
- Finger (finger)
- Roman Mile (m.p.)
- Stadion (stadion)
- Chi (Chinese) (chi)
- Shaku (Japanese) (shaku)
- Li (Chinese) (li)
- Toise (toise)
- Bolt (bolt)
- Rope (rope)
- Smoot (smoot)
- Sajene (sajene)
- Ken (ken)
- Vara (vara)
- Aln (aln)
- Cubit (Royal/Egyptian) (cubit)
- Versta (versta)
- Arpent (arpent)
- Ri (Japanese) (ri)
- Klafter (klafter)
- Yojana (yojana)
- Skein (skein)