Wa to Smoot Converter
Convert wa to smoots with our free online length converter.
Quick Answer
1 Wa = 1.175226 smoots
Formula: Wa × conversion factor = Smoot
Use the calculator below for instant, accurate conversions.
Our Accuracy Guarantee
All conversion formulas on UnitsConverter.io have been verified against NIST (National Institute of Standards and Technology) guidelines and international SI standards. Our calculations are accurate to 10 decimal places for standard conversions and use arbitrary precision arithmetic for astronomical units.
Wa to Smoot Calculator
How to Use the Wa to Smoot Calculator:
- Enter the value you want to convert in the 'From' field (Wa).
- The converted value in Smoot will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Wa to Smoot: Step-by-Step Guide
Converting Wa to Smoot involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Wa = 1.175226 smootsExample Calculation:
Convert 10 wa: 10 × 1.175226 = 11.75226 smoots
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
Need to convert to other length units?
View all Length conversions →What is a Wa and a Smoot?
The Wa (วา) is a traditional Thai unit of length. It is legally defined in relation to the metric system as exactly 2 meters.
The Wa serves as a fundamental unit within the traditional Thai system of measurement, particularly for land area. It is roughly equivalent to the distance between a person's outstretched fingertips when their arms are extended horizontally to the sides (similar to a fathom).
The Smoot is a non-standard, humorous unit of length created as part of an MIT fraternity prank in October 1958. It is defined by the height of Oliver R. Smoot (MIT class of 1962) at the time of the prank, which was 5 feet 7 inches.
This equates to:
- 67 inches (in)
- 1.7018 meters (m)
- Approximately 1.86 yards (yd)
Unlike standardized units, the Smoot is intrinsically tied to a specific individual's height at a particular moment and serves primarily as a cultural artifact and inside joke, particularly within the MIT community.
Note: The Wa is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Smoot belongs to the imperial/US customary system.
History of the Wa and Smoot
The Wa has been used in Thailand (formerly Siam) for centuries, likely originating from anthropomorphic measurements like the arm span. It was a practical unit for everyday measurements, construction, and land surveying.
- Traditional System: The Wa was part of a system that included smaller units like the khuep (span, ~25 cm), sok (cubit, ~50 cm, 1 Wa = 4 Sok), and larger units like the sen (rope, 1 Sen = 20 Wa).
- Standardization: During the modernization reforms under King Chulalongkorn (Rama V) in the late 19th and early 20th centuries, Thailand began standardizing its weights and measures. The Weights and Measures Act of 1923 formally defined traditional units in terms of the metric system. The Wa was officially set at exactly 2 meters.
- Metrication: While Thailand officially adopted the metric system as its primary standard, traditional units like the Wa remain legally defined and widely used, especially in specific contexts like land measurement.
The Smoot unit originated in October 1958 during the pledge activities of the Lambda Chi Alpha fraternity at MIT. Pledges were tasked with measuring the length of the Harvard Bridge, which connects Boston and Cambridge, Massachusetts, over the Charles River.
Instead of using conventional measuring tools, the fraternity members decided to use one of their pledges, Oliver Smoot, as the unit of measure. They repeatedly laid him down end-to-end across the bridge, marking off increments in paint. His companions carried him or helped him move for each new measurement.
The final measurement determined the bridge's length to be 364.4 Smoots "plus or minus one ear". The "ear" indicated the uncertainty of the measurement, adding to the absurdity and humor of the event.
The painted markings on the bridge became a local landmark. They have been maintained and periodically repainted over the decades, often unofficially by members of the fraternity or other MIT affiliates. The Cambridge Police Department traditionally tolerates the markings because, among other reasons, they serve as useful reference points for identifying locations along the bridge.
Interestingly, Oliver R. Smoot later became a prominent figure in standards organizations, serving as Chairman of the American National Standards Institute (ANSI) and President of the International Organization for Standardization (ISO), an ironic twist given his namesake unit's non-standard nature.
Common Uses and Applications: wa vs smoots
Explore the typical applications for both Wa (imperial/US) and Smoot (imperial/US) to understand their common contexts.
Common Uses for wa
The Wa's most significant modern use is in land measurement, but it historically had broader applications:
- Land Area: This is the most common contemporary use. Land area in Thailand is almost exclusively measured in Tarang Wa (ตารางวา - Square Wa).
- 1 Tarang Wa = 4 square meters (2m x 2m)
- 1 Ngan (งาน) = 100 Tarang Wa (400 sq m)
- 1 Rai (ไร่) = 4 Ngan = 400 Tarang Wa (1600 sq m) Property deeds, real estate listings, and land surveys invariably use Rai, Ngan, and Tarang Wa.
- Length Measurement: While meters are now standard for most length measurements (textiles, construction materials), the Wa might still be used informally or in traditional contexts. Historically, it was used for measuring distances, building dimensions, rope lengths, etc.
- Construction & Architecture: Traditionally used for laying out building plots and determining dimensions in Thai architecture.
- Cultural Context: Understanding the Wa and its related area units is essential for navigating real estate, agriculture, and historical contexts in Thailand.
When to Use smoots
The Smoot is not used for any official, scientific, or commercial measurements. Its use is primarily cultural and humorous:
- Harvard Bridge Markings: The painted markings on the bridge sidewalk are its most famous application, indicating distance in Smoots from the Boston side. They are a well-known local landmark.
- MIT Culture and Slang: Used humorously within the MIT community and sometimes in the broader Boston area as a quirky local reference.
- Digital Recognition: The unit gained wider recognition when it was included as a unit of measurement in Google Calculator and Google Earth's ruler tool.
- Popular Culture: Occasionally referenced in media or tech circles as an example of a non-standard or humorous unit.
Additional Unit Information
About Wa (wa)
How long is a Wa?
A Wa is defined as exactly:
- 2 meters (m)
- 200 centimeters (cm)
- Approximately 6.5617 feet (ft)
- Approximately 78.74 inches (in)
What are the related traditional Thai length units?
The Wa fits into a system, often based on factors of 2 and 10:
- Smaller Units:
- 1 Wa = 4 Sok (ศอก - cubit, ~50 cm)
- 1 Sok = 2 Khuep (คืบ - span, ~25 cm)
- 1 Khuep = 12 Nio (นิ้ว - finger breadth, ~2.08 cm, not the English inch)
- Larger Unit:
- 1 Sen (เส้น - rope/chain) = 20 Wa (40 meters)
- 1 Yot (โยชน์ - league) = 400 Sen (16 kilometers)
How is the Wa used for area measurement?
The primary unit for land area is the Tarang Wa (Square Wa):
- 1 Tarang Wa = 1 Wa × 1 Wa = 2 m × 2 m = 4 square meters Larger area units are based on the Tarang Wa:
- 1 Ngan = 100 Tarang Wa (400 m²)
- 1 Rai = 4 Ngan = 400 Tarang Wa (1600 m²)
- (For reference, 1 Acre ≈ 2.53 Rai, 1 Hectare = 6.25 Rai)
Is the Wa an SI unit?
No, the Wa is not an SI unit. It is a traditional Thai unit, although its legal definition is based on the SI unit, the meter (m).
Is the Wa still used today?
Yes, absolutely. While the metric system is the official standard for science, commerce, and industry, the Wa (especially as Tarang Wa for area) remains the standard unit for land measurement in Thailand. It is legally recognized and used in all official land documents and real estate transactions. Its use for linear measurement is less common but may still occur informally or in traditional settings.
About Smoot (smoot)
How long is a Smoot?
One Smoot is exactly the height of Oliver R. Smoot in 1958:
- 5 feet 7 inches
- 67 inches
- 1.7018 meters
Is the Smoot an official or standardized unit?
No, the Smoot is not an official or standardized unit of measurement in any system (Imperial, US customary, or SI). It is a non-standard, humorous unit originating from a specific event.
Why is the bridge measurement "plus or minus one ear"?
The "plus or minus one ear" (often written as ± εar) reflects the humorous imprecision of the original measurement method using a person. It signifies the margin of error in a whimsical way, possibly referencing the difficulty of the final partial measurement or simply adding to the prank's absurdity.
Are the Smoot markings still on the Harvard Bridge?
Yes, the markings are traditionally repainted periodically (often by Lambda Chi Alpha members) and are considered a fixture of the bridge. During bridge renovations in 2011, the Massachusetts Department of Transportation restored the markings, acknowledging their cultural significance.
How does the Smoot compare to standard units?
- 1 Smoot = 1.7018 meters
- 1 Meter ≈ 0.5876 Smoots
- 1 Smoot = 5.583 feet (5 feet 7 inches)
- 1 Foot ≈ 0.1791 Smoots
Is the Smoot an SI unit?
No, the Smoot is not an SI unit. It is a non-standard, informal unit. The SI base unit for length is the meter (m).
What did Oliver Smoot think of the unit?
Oliver Smoot generally embraced his namesake unit with good humor throughout his life and career, often participating in events related to it at MIT.
Conversion Table: Wa to Smoot
| Wa (wa) | Smoot (smoot) |
|---|---|
| 0.5 | 0.588 |
| 1 | 1.175 |
| 1.5 | 1.763 |
| 2 | 2.351 |
| 5 | 5.876 |
| 10 | 11.752 |
| 25 | 29.381 |
| 50 | 58.761 |
| 100 | 117.523 |
| 250 | 293.807 |
| 500 | 587.613 |
| 1,000 | 1,175.226 |
People Also Ask
How do I convert Wa to Smoot?
To convert Wa to Smoot, enter the value in Wa in the calculator above. The conversion will happen automatically. Use our free online converter for instant and accurate results. You can also visit our length converter page to convert between other units in this category.
Learn more →What is the conversion factor from Wa to Smoot?
The conversion factor depends on the specific relationship between Wa and Smoot. You can find the exact conversion formula and factor on this page. Our calculator handles all calculations automatically. See the conversion table above for common values.
Can I convert Smoot back to Wa?
Yes! You can easily convert Smoot back to Wa by using the swap button (⇌) in the calculator above, or by visiting our Smoot to Wa converter page. You can also explore other length conversions on our category page.
Learn more →What are common uses for Wa and Smoot?
Wa and Smoot are both standard units used in length measurements. They are commonly used in various applications including engineering, construction, cooking, and scientific research. Browse our length converter for more conversion options.
For more length conversion questions, visit our FAQ page or explore our conversion guides.
Helpful Conversion Guides
Learn more about unit conversion with our comprehensive guides:
📚 How to Convert Units
Step-by-step guide to unit conversion with practical examples.
🔢 Conversion Formulas
Essential formulas for length and other conversions.
⚖️ Metric vs Imperial
Understand the differences between measurement systems.
⚠️ Common Mistakes
Learn about frequent errors and how to avoid them.
All Length Conversions
Other Length Units and Conversions
Explore other length units and their conversion options:
Verified Against Authority Standards
All conversion formulas have been verified against international standards and authoritative sources to ensure maximum accuracy and reliability.
National Institute of Standards and Technology — Official US standards for length measurements
Bureau International des Poids et Mesures — International System of Units official documentation
Last verified: February 19, 2026