UnitsConverter

Megapascal to Kilogram-force per Square Meter Converter

Convert megapascals to kilograms-force per square meter with our free online pressure converter.

Quick Answer

1 Megapascal = 101971.621298 kilograms-force per square meter

Formula: Megapascal × conversion factor = Kilogram-force per Square Meter

Use the calculator below for instant, accurate conversions.

Our Accuracy Guarantee

All conversion formulas on UnitsConverter.io have been verified against NIST (National Institute of Standards and Technology) guidelines and international SI standards. Our calculations are accurate to 10 decimal places for standard conversions and use arbitrary precision arithmetic for astronomical units.

Last verified: February 2026Reviewed by: Sam Mathew, Software Engineer

Megapascal to Kilogram-force per Square Meter Calculator

How to Use the Megapascal to Kilogram-force per Square Meter Calculator:

  1. Enter the value you want to convert in the 'From' field (Megapascal).
  2. The converted value in Kilogram-force per Square Meter will appear automatically in the 'To' field.
  3. Use the dropdown menus to select different units within the Pressure category.
  4. Click the swap button (⇌) to reverse the conversion direction.
Share:

How to Convert Megapascal to Kilogram-force per Square Meter: Step-by-Step Guide

Converting Megapascal to Kilogram-force per Square Meter involves multiplying the value by a specific conversion factor, as shown in the formula below.

Formula:

kgf/m² = MPa × 101972

Example Calculation:

1 MPa = 101971.621298 kgf/m²

Disclaimer: For Reference Only

These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.

Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.

Need to convert to other pressure units?

View all Pressure conversions →
📊 Pressure Table

Print-friendly conversion reference

📋 Unit Symbols

Copy MPa & kgf/m² symbols

What is a Megapascal and a Kilogram-force per Square Meter?

1 MPa = 1,000,000 Pa = 1,000 kPa = 145.038 PSI = 10 bar = 9.869 atm

Why Megapascal?

MPa is the "sweet spot" for engineering pressures:

  • Pascal is too small: 1 Pa = barely measurable (atmospheric is 101,325 Pa)
  • Kilopascal is too granular: Engineering specs in kPa are 4-5 digit numbers (20,000 kPa for concrete)
  • MPa is optimal: Concrete 20-40 MPa (simple, memorable)
  • Engineering standard: All material specs given in MPa
  • SI-derived: ISO and international standards use MPa

1 kgf/m² = 9.807 Pa = 0.009807 kPa = 0.09807 mbar = 0.001422 PSI = 0.0736 mmHg

Also written as: kg/m², kgf·m⁻², kilogram-force per square meter

Physical meaning: Pressure exerted by 1 kilogram-force distributed over 1 square meter

Relationship to other kgf units:

  • 10,000 kgf/m² = 1 kgf/cm² (technical atmosphere)
  • 1 kgf/m² = 1 mm water column (approximately)

Note: The Megapascal is part of the imperial/US customary system, primarily used in the US, UK, and Canada for everyday measurements. The Kilogram-force per Square Meter belongs to the imperial/US customary system.

Common Uses and Applications: megapascals vs kilograms-force per square meter

Explore the typical applications for both Megapascal (imperial/US) and Kilogram-force per Square Meter (imperial/US) to understand their common contexts.

Common Uses for megapascals

Materials Engineering: Tensile strength, compressive strength, yield strength - THE standard unit for all material properties. Hydraulics: High-pressure hydraulic systems (construction, manufacturing, heavy equipment). Pressure Vessels: Gas cylinders, boilers, reactors, automotive fuel systems. Geotechnical: Soil bearing capacity, rock strength, foundation design. Aerospace: Structural requirements, component ratings.

Material Strengths (Compressive/Tensile)

Understanding material strength is critical for engineering design:

| Material | Type | Strength (MPa) | Notes | |---|---|---|---| | Styrofoam | Compression | 0.01-0.1 | Very weak, insulation only | | Wood (softwood) | Compression | 20-40 | Pine, spruce, fir typical | | Wood (hardwood) | Compression | 40-60 | Oak, maple stronger | | Brick | Compression | 10-40 | Varies by firing temperature | | Concrete (standard) | Compression | 20-40 | Common 28-day strength | | Concrete (high-strength) | Compression | 50-100 | Pre-stressed applications | | Granite | Compression | 100-250 | Very strong, suitable for columns | | Aluminum alloy (6061) | Tensile | 200-300 | Common structural aluminum | | Aluminum alloy (7075) | Tensile | 500-600 | High-strength aerospace | | Steel (structural ASTM A36) | Yield | 250 | Common building steel | | Steel (high-strength ASTM A572) | Yield | 345-450 | Bridge, crane applications | | Steel (ultra-high) | Tensile | 500-1,000 | Special applications | | Steel cable (wire rope) | Tensile | 1,600-2,000 | Elevators, suspension bridges | | Carbon fiber composite | Tensile | 3,000-7,000 | Aerospace, racing | | Kevlar fiber | Tensile | 3,600-3,800 | Armor, protective gear |

Design factor: Actual working stress = material strength ÷ safety factor (typically 2-4)

Hydraulic Systems (High Pressure)

Hydraulic pressure ratings define system capability:

| System Type | Operating Pressure | Peak Pressure | PSI Equivalent | Application | |---|---|---|---|---| | Automotive brake | 10-15 MPa | 20 MPa | 1,500-2,900 PSI | Car braking force | | Automobile power steering | 10-15 MPa | 20 MPa | 1,500-2,900 PSI | Steering assist | | Construction excavator | 20-35 MPa | 40 MPa | 2,900-5,800 PSI | Digging bucket | | Backhoe | 25-30 MPa | 35 MPa | 3,625-5,075 PSI | Heavy lifting | | Dump truck bed | 20-25 MPa | 30 MPa | 2,900-4,350 PSI | Lifting load | | Industrial press | 20-40 MPa | 50 MPa | 2,900-7,250 PSI | Metal forming | | Hydraulic jack | 50-70 MPa | 80 MPa | 7,250-11,600 PSI | Lifting capability | | Water jet cutter | 200-400 MPa | 450 MPa | 29,000-65,000 PSI | Material cutting | | Oil well pump | 100-200 MPa | 250 MPa | 14,500-36,250 PSI | Deep well pressure |

Pressure Vessels & Storage

Pressure ratings determine safe working limits:

| Vessel Type | Typical Pressure | Material | Working PSIG | |---|---|---|---| | Compressed air tank | 0.8-1.0 MPa | Steel | 116-145 PSI | | Propane BBQ tank | 1.5-2.0 MPa | Steel | 218-290 PSI | | Scuba tank (full) | 20-30 MPa | Aluminum/Steel | 3,000-4,350 PSI | | Natural gas vehicle | 20-25 MPa | Composite | 3,000-3,625 PSI | | Hydrogen fuel cell | 35-70 MPa | Carbon fiber | 5,000-10,000 PSI | | Industrial gas cylinder | 15-20 MPa | Steel | 2,175-2,900 PSI | | Medical oxygen | 13.8-15 MPa | Aluminum | 2,000-2,175 PSI | | Nitrogen (instrument) | 10-13.8 MPa | Steel | 1,450-2,000 PSI |

Safety factor: Pressure vessels typically designed with 4:1 to 6:1 safety margin

Geotechnical Engineering (Soil/Rock)

Foundation and excavation design based on pressure ratings:

| Material/Condition | Bearing Capacity | Suitable For | Notes | |---|---|---|---| | Soft clay | 0.05-0.2 MPa | Temporary structures | High settlement risk | | Medium clay | 0.1-0.3 MPa | Single story | Careful design needed | | Stiff clay | 0.3-0.5 MPa | Multi-story buildings | Good load capacity | | Dense sand | 0.3-0.6 MPa | Foundation base | Excellent for building | | Gravel/sand mixture | 0.6-1.0 MPa | Heavy structures | Very good bearing | | Soft rock (shale) | 1-10 MPa | Bridge supports | Rock analysis needed | | Medium rock | 10-50 MPa | Tall buildings | High capacity | | Hard rock (granite) | 50-100+ MPa | Largest structures | Excellent foundation |

Design process: Site investigation → soil tests → pressure capacity → foundation design

When to Use kilograms-force per square meter

Obsolete: Rarely used in modern engineering. Historical Documents: May appear in pre-1980s European/Soviet technical literature. Confusion Source: Sometimes mistaken for Pascal in old documents.

Additional Unit Information

About Megapascal (MPa)

How do I convert MPa to PSI?

Formula: PSI = MPa × 145.038

Examples:

  • 1 MPa = 145 PSI
  • 10 MPa = 1,450 PSI (car brakes)
  • 20 MPa = 2,900 PSI (hydraulic tools)
  • 30 MPa = 4,350 PSI (scuba tank)
  • 70 MPa = 10,153 PSI (H2 fuel tank)

MPa to PSI converter →

What is concrete strength in MPa?

Residential concrete: 20-32 MPa (2,900-4,650 PSI)

  • Footings/slabs: 20-25 MPa
  • Foundation walls: 25-30 MPa
  • Driveway: 25-32 MPa

Commercial concrete: 30-50 MPa

  • Floors: 30-35 MPa
  • Beams/columns: 35-50 MPa

High-strength: 50-100+ MPa

  • High-rise buildings: 50-80 MPa
  • Bridges: 60-100 MPa
  • Special applications: 100-150 MPa

Conversion: Divide PSI by 145 to get MPa (e.g., 3,000 PSI ≈ 21 MPa)

How do I convert MPa to bar?

Formula: bar = MPa × 10

Examples:

  • 0.1 MPa = 1 bar
  • 1 MPa = 10 bar
  • 2 MPa = 20 bar
  • 10 MPa = 100 bar
  • 20 MPa = 200 bar (scuba tank)

MPa to Bar converter →

What is a typical hydraulic system pressure?

Low pressure: 7-14 MPa (1,000-2,000 PSI)

  • Automotive power steering: 8-12 MPa
  • Light hydraulic lifts: 7-10 MPa

Medium pressure: 14-21 MPa (2,000-3,000 PSI)

  • Construction equipment: 20-25 MPa
  • Agricultural machinery: 14-20 MPa
  • Automotive brakes: 10-15 MPa

High pressure: 21-35 MPa (3,000-5,000 PSI)

  • Industrial presses: 25-35 MPa
  • Heavy construction: 30-35 MPa
  • Excavators: 30-35 MPa

Very high pressure: >35 MPa (>5,000 PSI)

  • Hydraulic jacks: 50-70 MPa
  • Specialized industrial: 70-100 MPa

Why use MPa instead of PSI for material strength?

SI standard: International engineering uses MPa universally Simpler numbers: 400 MPa vs 58,000 PSI Scientific: Consistent with stress calculations (force/area in N/m²) Global: Specifications understood worldwide

Conversion: PSI ÷ 145 ≈ MPa (or PSI × 0.00689 = MPa)

Example: Steel yield strength

  • As MPa: 250-400 MPa (easy)
  • As PSI: 36,000-58,000 PSI (unwieldy)

About Kilogram-force per Square Meter (kgf/m²)

How do I convert kgf/m² to Pa or kPa?

Formula: Pa = kgf/m² × 9.807

Examples:

  • 1 kgf/m² = 9.807 Pa ≈ 10 Pa
  • 10 kgf/m² = 98.07 Pa ≈ 0.1 kPa
  • 100 kgf/m² = 980.7 Pa ≈ 1 kPa
  • 1,000 kgf/m² = 9,807 Pa ≈ 10 kPa

Quick approximation: Multiply by 10 to get Pa (2% error)

kgf/m² to Pascal converter →

Is kgf/m² the same as Pascal?

No! But numerically close (common source of confusion)

kgf/m² (kilogram-force per square meter):

  • 1 kgf/m² = 9.807 Pa
  • Gravitational unit (depends on Earth's gravity)
  • Obsolete, not SI-compliant

Pa (Pascal = Newton per square meter):

  • 1 Pa = 1 N/m²
  • SI unit (independent of gravity)
  • Modern standard

Why confusion?:

  • Values similar in magnitude (differ by factor ~10)
  • Old documents sometimes mislabeled Pa as "kg/m²"
  • Both measure pressure

To clarify: If document says "kg/m²", determine if it means:

  • kgf/m² (multiply by 9.807 to get Pa)
  • Pa (mislabeled, use value directly)

How does kgf/m² relate to kgf/cm²?

1 kgf/cm² = 10,000 kgf/m² (factor of 10,000)

kgf/cm² (technical atmosphere):

  • High pressures (hydraulics, materials)
  • 1 kgf/cm² = 98,066.5 Pa ≈ 1 bar
  • Still used in some Asian countries

kgf/m²:

  • Very low pressures
  • 1 kgf/m² = 9.807 Pa
  • Almost completely obsolete

Conversion:

  • 1 kgf/cm² = 10,000 kgf/m²
  • (100 cm)² = 10,000 cm² per m²

Why is this unit not used anymore?

SI adoption (1970s-1980s): Countries switched to SI units (Pa, kPa, MPa)

Problems with kgf units:

  • Ambiguity: "kg" is mass, not force (requires "kgf" clarification)
  • Gravity dependence: Assumes standard gravity (9.80665 m/s²)
  • Confusion: Easy to mistake for Pascal or mass-per-area
  • Obsolete: No modern instruments calibrated in kgf/m²

Modern replacement: Pascal (Pa) and multiples

  • 1 kgf/m² → 10 Pa (approximately)
  • 100 kgf/m² → 1 kPa
  • 1,000 kgf/m² → 10 kPa

Where still seen:

  • Very old technical manuals (pre-1980s)
  • Historical scientific papers
  • Soviet/Russian legacy documents

Should I convert old kgf/m² values?

Yes, for modern use convert to Pa or kPa

Conversion steps:

  1. Identify if unit truly kgf/m² (check context, date)
  2. Multiply by 9.807 to get Pascals
  3. Convert to appropriate modern unit (Pa, kPa, mbar)

Example:

  • Old spec: "Building pressure 5 kgf/m²"
  • Convert: 5 × 9.807 = 49 Pa ≈ 0.5 mbar
  • Modern: "Building pressure 50 Pa" or "0.5 mbar"

Watch for mislabeling: Some old documents used "kg/m²" when they meant Pa—double-check with other values in document to confirm.

Conversion Table: Megapascal to Kilogram-force per Square Meter

Megapascal (MPa)Kilogram-force per Square Meter (kgf/m²)
0.550,985.811
1101,971.621
1.5152,957.432
2203,943.243
5509,858.107
101,019,716.213
252,549,290.532
505,098,581.065
10010,197,162.13
25025,492,905.324
50050,985,810.649
1,000101,971,621.298

People Also Ask

How do I convert Megapascal to Kilogram-force per Square Meter?

To convert Megapascal to Kilogram-force per Square Meter, enter the value in Megapascal in the calculator above. The conversion will happen automatically. Use our free online converter for instant and accurate results. You can also visit our pressure converter page to convert between other units in this category.

Learn more →

What is the conversion factor from Megapascal to Kilogram-force per Square Meter?

The conversion factor depends on the specific relationship between Megapascal and Kilogram-force per Square Meter. You can find the exact conversion formula and factor on this page. Our calculator handles all calculations automatically. See the conversion table above for common values.

Can I convert Kilogram-force per Square Meter back to Megapascal?

Yes! You can easily convert Kilogram-force per Square Meter back to Megapascal by using the swap button (⇌) in the calculator above, or by visiting our Kilogram-force per Square Meter to Megapascal converter page. You can also explore other pressure conversions on our category page.

Learn more →

What are common uses for Megapascal and Kilogram-force per Square Meter?

Megapascal and Kilogram-force per Square Meter are both standard units used in pressure measurements. They are commonly used in various applications including engineering, construction, cooking, and scientific research. Browse our pressure converter for more conversion options.

For more pressure conversion questions, visit our FAQ page or explore our conversion guides.

Helpful Conversion Guides

Learn more about unit conversion with our comprehensive guides:

📚 How to Convert Units

Step-by-step guide to unit conversion with practical examples.

🔢 Conversion Formulas

Essential formulas for pressure and other conversions.

⚖️ Metric vs Imperial

Understand the differences between measurement systems.

⚠️ Common Mistakes

Learn about frequent errors and how to avoid them.

View All Guides →

All Pressure Conversions

Pascal to KilopascalPascal to MegapascalPascal to HectopascalPascal to BarPascal to MillibarPascal to AtmospherePascal to Technical AtmospherePascal to TorrPascal to Millimeter of MercuryPascal to Inch of MercuryPascal to Pound per Square InchPascal to Kilopound per Square InchPascal to Kilogram-force per Square CentimeterPascal to Kilogram-force per Square MeterPascal to Millimeter of Water ColumnPascal to Inch of Water ColumnKilopascal to PascalKilopascal to MegapascalKilopascal to HectopascalKilopascal to BarKilopascal to MillibarKilopascal to AtmosphereKilopascal to Technical AtmosphereKilopascal to TorrKilopascal to Millimeter of MercuryKilopascal to Inch of MercuryKilopascal to Pound per Square InchKilopascal to Kilopound per Square InchKilopascal to Kilogram-force per Square CentimeterKilopascal to Kilogram-force per Square MeterKilopascal to Millimeter of Water ColumnKilopascal to Inch of Water ColumnMegapascal to PascalMegapascal to KilopascalMegapascal to HectopascalMegapascal to BarMegapascal to MillibarMegapascal to AtmosphereMegapascal to Technical AtmosphereMegapascal to TorrMegapascal to Millimeter of MercuryMegapascal to Inch of MercuryMegapascal to Pound per Square InchMegapascal to Kilopound per Square InchMegapascal to Kilogram-force per Square CentimeterMegapascal to Millimeter of Water ColumnMegapascal to Inch of Water ColumnHectopascal to PascalHectopascal to KilopascalHectopascal to MegapascalHectopascal to BarHectopascal to MillibarHectopascal to AtmosphereHectopascal to Technical AtmosphereHectopascal to TorrHectopascal to Millimeter of MercuryHectopascal to Inch of MercuryHectopascal to Pound per Square InchHectopascal to Kilopound per Square InchHectopascal to Kilogram-force per Square CentimeterHectopascal to Kilogram-force per Square MeterHectopascal to Millimeter of Water ColumnHectopascal to Inch of Water ColumnBar to PascalBar to KilopascalBar to MegapascalBar to HectopascalBar to MillibarBar to AtmosphereBar to Technical AtmosphereBar to TorrBar to Millimeter of MercuryBar to Inch of MercuryBar to Pound per Square InchBar to Kilopound per Square InchBar to Kilogram-force per Square CentimeterBar to Kilogram-force per Square MeterBar to Millimeter of Water ColumnBar to Inch of Water ColumnMillibar to PascalMillibar to KilopascalMillibar to MegapascalMillibar to HectopascalMillibar to BarMillibar to AtmosphereMillibar to Technical AtmosphereMillibar to TorrMillibar to Millimeter of MercuryMillibar to Inch of MercuryMillibar to Pound per Square InchMillibar to Kilopound per Square InchMillibar to Kilogram-force per Square CentimeterMillibar to Kilogram-force per Square MeterMillibar to Millimeter of Water ColumnMillibar to Inch of Water ColumnAtmosphere to PascalAtmosphere to KilopascalAtmosphere to MegapascalAtmosphere to HectopascalAtmosphere to BarAtmosphere to MillibarAtmosphere to Technical AtmosphereAtmosphere to TorrAtmosphere to Millimeter of MercuryAtmosphere to Inch of MercuryAtmosphere to Pound per Square InchAtmosphere to Kilopound per Square InchAtmosphere to Kilogram-force per Square CentimeterAtmosphere to Kilogram-force per Square MeterAtmosphere to Millimeter of Water ColumnAtmosphere to Inch of Water ColumnTechnical Atmosphere to PascalTechnical Atmosphere to KilopascalTechnical Atmosphere to MegapascalTechnical Atmosphere to HectopascalTechnical Atmosphere to BarTechnical Atmosphere to MillibarTechnical Atmosphere to AtmosphereTechnical Atmosphere to TorrTechnical Atmosphere to Millimeter of Mercury

Other Pressure Units and Conversions

Explore other pressure units and their conversion options:

View all pressure units →

Verified Against Authority Standards

All conversion formulas have been verified against international standards and authoritative sources to ensure maximum accuracy and reliability.

NIST Reference on Constants, Units and Uncertainty

National Institute of Standards and Technology — Fundamental physical constants and unit conversions

BIPM SI Units

Bureau International des Poids et Mesures — International System of Units (SI) definitions and standards

ISO 80000

International Organization for Standardization — Quantities and units international standards series

Last verified: February 19, 2026