Cubit (Royal/Egyptian) (cubit) - Unit Information & Conversion
What is a Cubit (Royal/Egyptian)?
Definition
The Royal Cubit (Ancient Egyptian: meh nesut) was the primary ancient Egyptian standard unit of linear measure. It was based on the length of the forearm from the elbow to the tip of the extended middle finger, plus the width of the palm. It is considered one of the earliest attested standard units of measurement.
The Royal Cubit was typically divided into 7 palms (shesep), with each palm further divided into 4 digits or fingers (djeba), totaling 28 digits. Its length varied slightly over time and location but is generally accepted to be approximately 52.3 to 52.9 centimeters (about 20.6 to 20.8 inches). A common average value used is 0.524 meters.
A shorter Common Cubit or Short Cubit (Ancient Egyptian: meh sherer) also existed, measuring 6 palms (24 digits), approximately 45 cm.
History
The Royal Cubit emerged very early in Egyptian history, likely during the Predynastic or Early Dynastic Period (before 3000 BCE). Its standardization was crucial for the large-scale construction projects undertaken by the pharaohs.
- Early Standardization: It represents one of history's first successful attempts at creating and maintaining a standard unit of length, essential for architectural precision and administrative consistency.
- Cubit Rods: Physical standards, known as cubit rods, were created from durable materials like wood, slate, or granite. These rods were often inscribed with subdivisions (palms, digits, and sometimes fractions of digits) and sometimes bore dedications or official insignia. Examples have been found in tombs, such as that of Tutankhamun, and likely served as official benchmarks.
- Monumental Construction: The Royal Cubit was the fundamental unit used in the design and construction of temples, palaces, and most famously, the pyramids. The precise dimensions of structures like the Great Pyramid of Giza reflect careful measurement using this standard.
- Longevity: The Royal Cubit remained the standard measure in Egypt for millennia, from the Old Kingdom through the Ptolemaic period and into Roman times, demonstrating remarkable stability.
Common Uses
The Royal Cubit was integral to many aspects of ancient Egyptian society:
- Architecture and Construction: Defining building dimensions, column heights, room layouts, and overall structural proportions.
- Land Surveying: Measuring fields for agriculture, taxation, and property boundaries, especially after the annual Nile flood receded.
- Record Keeping: Used in administrative documents, inventories, and calculations.
- Craftsmanship: Measuring materials like stone blocks, timber, rope, and textiles.
- Art and Iconography: Used to establish proportions in statues and reliefs according to canonical rules.
- Religious and Funerary Contexts: Cubit rods were sometimes included in tomb equipment, possibly symbolizing order and correctness or serving a practical purpose in the afterlife.
- Historical Texts: The term "cubit" appears in various ancient texts, including the Bible, though the specific length intended (Egyptian Royal, common, Babylonian, etc.) can be context-dependent.
Unit FAQs
How was the Royal Cubit standardized?
Standardization was achieved through the creation and maintenance of master cubit rods. These physical exemplars, often made of durable stone like granite, were likely kept in major temples or administrative centers. Officials and craftsmen would use copies made from these masters for practical work. The rods themselves were meticulously marked with the primary divisions of 7 palms and 28 digits, often including finer subdivisions. This system ensured consistency across large projects and different regions of the kingdom.
What is the difference between a short cubit and a royal cubit?
The two main cubit measures in ancient Egypt were:
- Short Cubit (meh sherer): Measured 6 palms (24 digits), approximately 44.7 to 45 cm (around 17.6 inches). It represented the distance from the elbow to the tip of the thumb or closed fist. It was likely used for more common, everyday measurements of cloth, goods, or smaller objects.
- Royal Cubit (meh nesut): Measured 7 palms (28 digits), approximately 52.3 to 52.9 cm (around 20.6 inches). It was the length from the elbow to the tip of the middle finger plus one palm width. This was the official standard used for monumental architecture, land surveying, and significant state projects. It likely held a higher status and was associated with the pharaoh and divine order.
How long was the Royal Cubit?
The Royal Cubit was approximately:
- 0.523 to 0.529 meters (m)
- 52.3 to 52.9 centimeters (cm)
- 20.6 to 20.8 inches (in)
- Roughly 1.72 feet (ft)
A value of 0.524 m is often used as a representative average.
Is the Cubit still used today?
No, the ancient Egyptian Cubit (both Royal and short) is obsolete. It has not been in practical use for centuries, having been replaced by other measurement systems and ultimately by the metric system. Its relevance today is purely historical, archaeological, and academic.
Is the Cubit an SI unit?
No, the Cubit is not an SI unit. It is an ancient, traditional unit of measurement originating in Egypt. The SI base unit for length is the meter (m).
Cubit (Royal/Egyptian) Conversion Formulas
To Meter:
To Kilometer:
To Hectometer:
To Decimeter:
To Centimeter:
To Millimeter:
To Inch:
To Foot:
To Yard:
To Mile:
To Nautical Mile:
To Micrometer:
To Nanometer:
To Light Year:
To Astronomical Unit:
To Parsec:
To Angstrom:
To Point (Typography):
To Mil/Thou:
To Fathom:
To Furlong:
To Link (Gunter's):
To Pace:
To Span:
To Digit:
To Cable Length:
To Ell:
To Finger:
To Roman Mile:
To Stadion:
To Chi (Chinese):
To Shaku (Japanese):
To Li (Chinese):
To Toise:
To Bolt:
To Rope:
To Smoot:
To Sajene:
To Ken:
To Wa:
To Vara:
To Aln:
To Versta:
To Arpent:
To Ri (Japanese):
To Klafter:
To Yojana:
To Skein:
Convert Cubit (Royal/Egyptian)
Need to convert Cubit (Royal/Egyptian) to other length units? Use our conversion tool.
Cubit (Royal/Egyptian) Quick Info
Related Length Units
- Meterm
- Kilometerkm
- Hectometerhm
- Decimeterdm
- Centimetercm
- Millimetermm
- Inchin
- Footft
- Yardyd
- Milemi
- Nautical MileNM
- Micrometerμm
- Nanometernm
- Light Yearly
- Astronomical UnitAU
- Parsecpc
- AngstromÅ
- Point (Typography)pt
- Mil/Thoumil
- Fathomfath
- Furlongfur
- Link (Gunter's)li
- Pacepace
- Spanspan
- Digitdigit
- Cable Lengthcb
- Ellell
- Fingerfinger
- Roman Milem.p.
- Stadionstadion
- Chi (Chinese)chi
- Shaku (Japanese)shaku
- Li (Chinese)li
- Toisetoise
- Boltbolt
- Roperope
- Smootsmoot
- Sajenesajene
- Kenken
- Wawa
- Varavara
- Alnaln
- Verstaversta
- Arpentarpent
- Ri (Japanese)ri
- Klafterklafter
- Yojanayojana
- Skeinskein