Meter to Fathom Converter
Convert meters to fathoms with our free online length converter.
Quick Answer
1 Meter = 0.546807 fathoms
Formula: Meter × conversion factor = Fathom
Use the calculator below for instant, accurate conversions.
Our Accuracy Guarantee
All conversion formulas on UnitsConverter.io have been verified against NIST (National Institute of Standards and Technology) guidelines and international SI standards. Our calculations are accurate to 10 decimal places for standard conversions and use arbitrary precision arithmetic for astronomical units.
Meter to Fathom Calculator
How to Use the Meter to Fathom Calculator:
- Enter the value you want to convert in the 'From' field (Meter).
- The converted value in Fathom will appear automatically in the 'To' field.
- Use the dropdown menus to select different units within the Length category.
- Click the swap button (⇌) to reverse the conversion direction.
How to Convert Meter to Fathom: Step-by-Step Guide
Converting Meter to Fathom involves multiplying the value by a specific conversion factor, as shown in the formula below.
Formula:
1 Meter = 0.546807 fathomsExample Calculation:
Convert 10 meters: 10 × 0.546807 = 5.468066 fathoms
Disclaimer: For Reference Only
These conversion results are provided for informational purposes only. While we strive for accuracy, we make no guarantees regarding the precision of these results, especially for conversions involving extremely large or small numbers which may be subject to the inherent limitations of standard computer floating-point arithmetic.
Not for professional use. Results should be verified before use in any critical application. View our Terms of Service for more information.
Need to convert to other length units?
View all Length conversions →What is a Meter and a Fathom?
The meter (US spelling) or metre (International spelling) (symbol: m) is the base unit of length in the International System of Units (SI). It is one of the seven SI base units and forms the foundation for measuring distance in the metric system.
Modern Definition (1983): The meter is defined as the distance traveled by light in a vacuum in exactly 1/299,792,458 of a second. This definition links the meter to the speed of light, a fundamental constant of nature (c = 299,792,458 meters per second).
Key relationships:
- 1 meter = 100 centimeters (cm)
- 1 meter = 1,000 millimeters (mm)
- 1 meter = 0.001 kilometers (km)
- 1,000 meters = 1 kilometer
In terms of imperial/US customary units:
- 1 meter ≈ 3.28084 feet (ft) - Convert m to ft
- 1 meter ≈ 39.3701 inches (in) - Convert m to inches
- 1 meter ≈ 1.09361 yards (yd) - Convert m to yards
Visual perspective (how long is it?):
- 1 meter ≈ Length of a guitar
- 1 meter ≈ Distance from nose to fingertips (arm outstretched)
- 1 meter ≈ One adult step/stride
- 1 meter ≈ Width of a single bed
- 2 meters ≈ Standard doorway height
- 5 meters ≈ Length of a small car
It is the fundamental unit upon which all other SI length units are based through decimal multiplication or division.
Convert between length units: meter converter
The Six-Foot Maritime Standard
The fathom is defined as exactly 6 feet in the imperial and U.S. customary measurement systems.
Precise equivalents:
- 6 feet (by definition)
- 2 yards (6 ft ÷ 3 ft/yd)
- 72 inches (6 ft × 12 in/ft)
- 1.8288 meters (exactly, using 1 ft = 0.3048 m)
- 182.88 centimeters
Historical basis: The arm span of an average man with arms fully outstretched, measured from fingertip to fingertip.
Arm Span Origins
Old English "fæthm":
- Primary meaning: To embrace, encircle with outstretched arms
- Secondary meaning: The distance between fingertips when arms are extended
Practical measurement: Sailors hauling in sounding lines (weighted ropes for measuring depth) would pull hand-over-hand, with each arm span representing one fathom. This created a natural counting method:
- Drop weighted line overboard
- Haul in, counting arm spans
- Number of arm spans = depth in fathoms
Standardization necessity: Since arm spans varied (5.5-6.5 feet typically), maritime commerce required a fixed standard. The British settled on exactly 6 feet, matching the standardized foot of 12 inches.
Nautical Charts and Depth Contours
Fathom lines: Nautical charts show depth contours (lines connecting points of equal depth) traditionally measured in fathoms.
Common contour intervals:
- 1, 2, 3, 5, 10 fathoms: Shallow coastal waters
- 20, 50, 100 fathoms: Coastal navigation
- 500, 1,000 fathoms: Deep ocean
Chart notation: Depths written as plain numbers on charts (e.g., "45") indicate 45 fathoms unless otherwise specified. Modern charts often include a note: "Depths in fathoms" or "Depths in meters."
Anchor Cable and Chain
Shackle: One "shackle" of anchor chain traditionally equals 15 fathoms (90 feet / 27.43 m) in the Royal Navy and many navies worldwide.
Anchoring depth rule: Ships typically anchor with a scope (ratio of chain length to water depth) of 5:1 to 7:1 for safety.
Example:
- Water depth: 10 fathoms (60 feet)
- Required chain: 50-70 fathoms (300-420 feet)
- That's 3.3 to 4.7 shackles
Note: The Meter is part of the metric (SI) system, primarily used globally in science and trade. The Fathom belongs to the imperial/US customary system.
History of the Meter and Fathom
-
Pre-Revolutionary France (Pre-1790s): France used hundreds of different local length units, creating confusion in trade and science. The need for a universal, standardized system became critical.
-
Birth of the Meter (1791-1793): During the French Revolution, the French Academy of Sciences proposed a new unit of length based on natural constants. They defined the meter as one ten-millionth (1/10,000,000) of the distance from the Earth's equator to the North Pole along the meridian passing through Paris.
-
Meridian Survey (1792-1799): Astronomers Pierre Méchain and Jean-Baptiste Delambre conducted a seven-year expedition to measure the meridian arc from Dunkirk to Barcelona to determine the exact length of the meter. This ambitious survey became legendary in scientific history.
-
Platinum Meter Bar (1799): Based on the meridian measurements, the first physical standard was created: a platinum bar stored in the French National Archives. This became the legal meter in France.
-
Treaty of the Metre (1875): Seventeen nations signed this international treaty, establishing the General Conference on Weights and Measures (CGPM) and the International Bureau of Weights and Measures (BIPM) to maintain global measurement standards.
-
International Prototype Meter (1889): A more precise platinum-iridium bar was created and designated as the international standard. This prototype was kept at the BIPM near Paris under controlled conditions (specific temperature, pressure, support points).
-
Krypton-86 Definition (1960): To improve accuracy and reproducibility, the meter was redefined as 1,650,763.73 wavelengths of the orange-red light emitted by krypton-86 atoms in a vacuum. This was the first definition based on atomic physics rather than a physical object.
-
Speed of Light Definition (1983): The current definition was adopted, fixing the speed of light at exactly 299,792,458 m/s and defining the meter based on this constant. This provided the most stable and reproducible definition possible, as the speed of light is a fundamental constant of nature.
-
Global Adoption: Today, the meter is used by virtually every country in the world. Only Liberia, Myanmar, and the United States have not fully adopted the metric system for everyday use, though even the US uses it extensively in science, medicine, and manufacturing.
-
Why It Matters: The meter's evolution from a physical bar to a definition based on universal constants represents humanity's quest for increasingly precise and universally accessible measurement standards.
Ancient Maritime Practices (Pre-9th Century)
Mediterranean and Northern European sailors: Ancient mariners measured rope and depth using body-based units:
- Cubit: Elbow to fingertip (~18 inches)
- Pace: Two steps (~5 feet)
- Arm span: Outstretched arms (~6 feet)
Sounding lead: A heavy weight (lead sinker) attached to a marked line, dropped overboard to measure depth. Sailors counted arm spans as they hauled the line back aboard.
Old English Documentation (9th-11th Centuries)
Earliest references: Anglo-Saxon texts use "fæthm" for measuring rope lengths and describing distances.
Beowulf (8th-11th century): The epic poem mentions "fæthmas" in describing ocean depths and ship measurements.
Viking influence: Old Norse "faðmr" (similar arm-span measurement) influenced English usage through Viking contact and trade.
Medieval Standardization (13th-15th Centuries)
Edward I (1272-1307): English law under Edward I began standardizing measurements, including the fathom at 6 feet.
Admiralty regulations: The emerging Royal Navy needed consistent rope, sail, and depth measurements for shipbuilding and navigation.
Rope making: British rope makers sold cordage by the fathom, with standard lengths for anchor cables (120 fathoms = 1 cable length in some contexts).
Age of Exploration (15th-17th Centuries)
Navigation charts: Early nautical charts (portolan charts) began incorporating depth soundings in fathoms.
Captain James Cook (1768-1779): Cook's Pacific voyages produced meticulous charts with fathom-based depth measurements. His charts became templates for British Admiralty standards.
Example - HMS Endeavour soundings: Cook's logs record depths like "15 fathoms, sandy bottom" or "No bottom at 100 fathoms" (indicating depths exceeding 600 feet).
British Admiralty Charts (19th Century)
Hydrographic Office (founded 1795): The British Admiralty Hydrographic Office systematized global nautical chart production, standardizing fathoms for depth.
Matthew Fontaine Maury (1806-1873): American oceanographer Maury collaborated with the British to create standardized depth charts using fathoms, mapping ocean currents and depths.
Cable-laying expeditions: Transatlantic telegraph cable projects (1850s-1860s) required precise fathom-based depth surveys. HMS Agamemnon and USS Niagara charted the Atlantic floor in fathoms before laying the 1858 cable.
U.S. Navy Adoption (19th-20th Centuries)
Inherited British standards: The U.S. Navy adopted British maritime practices, including fathom-based charts and anchor cable measurements.
U.S. Coast and Geodetic Survey: Founded in 1807 (originally "Survey of the Coast"), it produced nautical charts in fathoms for American waters.
World War II: Submarine warfare and amphibious operations relied heavily on fathom-based depth charts. USS submarines operated in waters charted in fathoms.
Metrication Movement (20th Century-Present)
International Hydrographic Organization (IHO, founded 1921): Recommended global adoption of metric system for nautical charts.
Gradual transition:
- 1970s-1980s: Most nations began publishing new charts in meters
- UK Admiralty: Converted most charts to meters by the 1990s
- U.S. NOAA: Many American charts still use fathoms, particularly for coastal waters
Mixed usage today: Modern electronic chart systems (ECDIS) allow display in either fathoms or meters, accommodating mariners accustomed to either system.
Common Uses and Applications: meters vs fathoms
Explore the typical applications for both Meter (metric) and Fathom (imperial/US) to understand their common contexts.
Common Uses for meters
The meter is the fundamental length unit used across virtually all fields worldwide:
Science and Research
The universal standard in all scientific disciplines. Essential for maintaining consistency in international research and allowing scientists globally to share and compare results.
Scientific Applications:
- Physics experiments and calculations
- Chemistry lab measurements
- Biology specimen measurements
- Astronomy (often combined with larger units like megameters or astronomical units)
- Geology and earth sciences
- Medical research and diagnostics
Why meters in science:
- SI base unit ensures universal understanding
- Decimal system simplifies calculations
- Precise definition based on fundamental constants
- Required for publication in scientific journals
- Enables international collaboration
Convert for scientific work: meters to other units
Construction and Engineering
Standard unit for building plans, specifications, and measurements in most countries. Essential for architectural drawings, structural engineering, and construction site work.
Construction uses:
- Building dimensions and floor plans
- Material specifications (lumber, pipes, cables)
- Site surveying and land measurements
- Road and bridge design
- Utility installations
- Safety clearances and regulations
Engineering disciplines:
- Civil engineering (infrastructure, roads, dams)
- Mechanical engineering (machine design, tolerances)
- Electrical engineering (cable runs, installations)
- Structural engineering (building analysis)
Why meters dominate:
- International building codes
- Global supply chains use metric
- Simplified scaling (1:100, 1:50 drawings)
- Easy conversion between units (mm, cm, m, km)
Athletics and Sports
The standard for track and field events, swimming pools, and most international sports. Creates consistency in competition and record-keeping worldwide.
Track and Field:
- All race distances (100m, 200m, 400m, etc.)
- Field event measurements (high jump, long jump, javelin)
- Track dimensions (400m oval)
Swimming:
- Pool lengths (25m, 50m)
- Race distances
- Pool depth specifications
Other Sports:
- Soccer field dimensions
- Basketball court measurements (FIBA)
- Tennis court specifications
- Ski jump distances
World Records: All Olympic and international records use meters
Manufacturing and Industry
Essential for product design, quality control, and manufacturing specifications. Enables global supply chains and standardized parts.
Manufacturing uses:
- Product dimensions and tolerances
- Machine specifications
- Assembly line measurements
- Quality control standards
- Shipping container sizes
- Material cutting and fabrication
Industries:
- Automotive (car dimensions, parts)
- Aerospace (aircraft specifications)
- Electronics (component spacing)
- Textiles (fabric measurements)
- Furniture (product dimensions)
Everyday Life (Metric Countries)
Daily measurements for height, distance, and dimensions in 95% of the world's countries.
Personal measurements:
- Human height and weight
- Clothing sizes (combined with cm)
- Recipe distances (rare, but when needed)
- Home improvement projects
Shopping:
- Fabric by the meter
- Carpeting and flooring
- Curtains and blinds
- Garden hoses and cables
Driving:
- Road signs (distances in km, using meters as base)
- Vehicle dimensions
- Parking regulations
Use our meter converter for everyday conversions.
Aviation and Maritime
Critical for navigation, altitude, and safety specifications in international travel.
Aviation:
- Runway lengths
- Aircraft dimensions
- Altitude (often in feet, but meters in some regions)
- Visibility distances
Maritime:
- Ship dimensions
- Harbor depths (often in meters or fathoms)
- Vessel clearances
- Navigation distances
Medical and Healthcare
Standard for patient measurements and medical equipment in most healthcare systems worldwide.
Medical uses:
- Patient height
- Wound measurements
- Medical imaging distances
- Equipment specifications
- Hospital room dimensions
- Surgical instrument lengths
When to Use fathoms
1. Nautical Charts and Hydrography
Depth soundings: Nautical charts mark depths in fathoms, particularly on U.S. and older British charts.
Contour lines: Lines connecting equal depths (e.g., the 10-fathom line) help mariners avoid shallow areas.
Chart abbreviations:
- fms: Fathoms
- fm: Fathom
- No bottom at 100 fms: Depth exceeds 100 fathoms (600 feet)
2. Anchoring and Mooring
Anchor scope: Mariners calculate how much anchor chain to deploy based on water depth in fathoms.
Rule of thumb: Deploy 5-7 times the water depth in calm conditions, 7-10 times in storms.
Example:
- Depth: 8 fathoms
- Calm weather scope (5:1): 40 fathoms of chain
- Storm scope (10:1): 80 fathoms of chain
3. Commercial Fishing
Net depth: Fishermen describe trawl net depths in fathoms.
Example: "Running trawl at 50 fathoms" (300 feet deep)
Fishing line: Deep-sea fishing lines measured in fathoms to target specific depths.
4. Recreational Boating and Diving
Depth sounders: Many recreational boat depth finders display fathoms (though meters and feet are increasingly common).
Dive planning: Divers reference depth in fathoms on nautical charts when planning dive sites.
5. Submarine Operations
Periscope depth: Submarines traditionally use fathoms for depth control.
Example: "Dive to 20 fathoms" (120 feet)
Historical note: WWII submarine logs recorded depths in fathoms; modern submarines use meters.
6. Maritime Literature and Tradition
Nautical expressions:
- "To fathom something" = to understand its depth (metaphorically)
- "Unfathomable" = too deep to measure or comprehend
Sailing instructions: Traditional pilot books use fathoms for approach depths and anchorage recommendations.
Additional Unit Information
About Meter (m)
How long is a meter visually?
One meter is about the distance from your nose to your fingertips when you extend your arm straight out to the side.
Visual comparisons:
- Slightly longer than a yard (1 m = 1.09 yards)
- About 3.3 feet (one adult stride)
- Length of a guitar (most acoustic guitars)
- Width of a single bed
- Slightly longer than a baseball bat
- Three average-sized rulers (30cm each)
Body measurements:
- Most adults can approximate 1 meter with arm span from nose to fingertips
- One large step/stride for most adults
- Height from ground to waist/hip for average adult
Common objects exactly 1 meter:
- Meter stick/ruler (by definition)
- Certain guitar models
- Standard yoga mat width (60cm) is just over half a meter
To remember: Think of it as "just over 3 feet" or "slightly longer than a yard"
How many feet are in a meter?
One meter equals approximately 3.28084 feet, commonly rounded to 3.28 feet.
Exact conversion: 1 meter = 3.280839895 feet
Practical conversions:
- 1 meter ≈ 3.28 feet
- 2 meters ≈ 6.56 feet
- 5 meters ≈ 16.4 feet
- 10 meters ≈ 32.8 feet
- 100 meters ≈ 328 feet
Reverse conversion (feet to meters):
- 1 foot = 0.3048 meters (exactly)
- 3 feet ≈ 0.91 meters
- 6 feet ≈ 1.83 meters
- 10 feet ≈ 3.05 meters
Why 3.28?
- Based on the international foot definition (0.3048 m)
- 1 meter ÷ 0.3048 meters/foot = 3.28084 feet
Quick estimation: Multiply meters by 3 for a rough approximation (though this underestimates by ~9%)
Use our meter to feet converter for accurate conversions.
How many centimeters are in a meter?
There are exactly 100 centimeters (cm) in one meter.
Why 100?: The prefix "centi-" means 1/100, so a centimeter is 1/100 of a meter.
Conversion:
- 1 meter = 100 centimeters
- To convert meters to cm: multiply by 100
- To convert cm to meters: divide by 100
Examples:
- 0.5 meters = 50 cm
- 1.5 meters = 150 cm
- 2.75 meters = 275 cm
- 50 cm = 0.5 meters
- 175 cm = 1.75 meters (typical adult height)
Remember: Move the decimal point two places:
- Meters → cm: Move right (1.5 m = 150 cm)
- Cm → meters: Move left (150 cm = 1.5 m)
Use our meter to cm converter for instant conversions.
Is the meter used in the United States?
Officially: The US uses the metric system in science, medicine, military, and many industries, but the US customary system (feet, inches, miles) dominates everyday life.
Where meters ARE used in the US:
- Science and research: All scientific work
- Medicine: Patient measurements, medical devices
- Military: NATO standardization requires metric
- Manufacturing: Especially for export products
- Athletics: Track and field events
- Pharmaceuticals: Drug measurements
- Automotive: Many car specifications
- Electronics: Component specifications
Where meters are NOT commonly used:
- Road signs (miles, not kilometers)
- Construction (feet, inches)
- Everyday conversation (height, distance)
- Cooking (cups, ounces, not liters/grams)
- Real estate (square feet, acres)
- Weather (Fahrenheit, not Celsius)
Status: The US is officially metric (Metric Conversion Act of 1975) but implementation is voluntary, so dual systems coexist.
Fun fact: US money is metric (100 cents = 1 dollar), but most Americans don't think of it that way!
How many meters are in a kilometer?
There are exactly 1,000 meters in one kilometer.
Why: "Kilo-" is a Greek prefix meaning 1,000.
Conversion:
- 1 kilometer (km) = 1,000 meters (m)
- To convert km to m: multiply by 1,000
- To convert m to km: divide by 1,000
Examples:
- 0.5 km = 500 meters
- 1.5 km = 1,500 meters
- 2.5 km = 2,500 meters
- 5 km = 5,000 meters
- 10 km = 10,000 meters
- 500 m = 0.5 km
- 2,000 m = 2 km
Perspective:
- A kilometer is a common walking distance (10-15 minutes)
- 5K race = 5 kilometers = 5,000 meters
- Marathon = 42.195 kilometers = 42,195 meters
Remember: Move the decimal point three places:
- Km → m: Move right (1.5 km = 1,500 m)
- M → km: Move left (1,500 m = 1.5 km)
Convert: meters to kilometers | kilometers to meters
How is the meter defined today?
Current Definition (since 1983): The meter is defined as the distance light travels in a vacuum in exactly 1/299,792,458 of a second.
Why this definition?:
- Universal constant: The speed of light (c) is the same everywhere in the universe
- Extremely precise: Can be reproduced in any properly equipped laboratory
- No physical artifact: Doesn't depend on a prototype bar that could degrade
- Fundamentally stable: Based on physics, not human-made objects
What this means:
- The speed of light is fixed at exactly 299,792,458 meters per second
- This definition links length to time (which is measured even more precisely)
- Any lab with an atomic clock can reproduce the meter
Historical evolution:
- 1793: Earth meridian (1/10,000,000 of equator to pole)
- 1889: Platinum-iridium bar in Paris
- 1960: Krypton-86 wavelengths
- 1983: Speed of light (current definition)
Why it matters: This makes the meter one of the most precisely defined and reproducible units in all of science.
What's the difference between meter and metre?
No difference - they are the same unit, just different spellings!
Spelling variations:
- Meter: American English spelling (US, Philippines)
- Metre: International English spelling (UK, Canada, Australia, most other English-speaking countries)
Symbol: Both use m as the abbreviation
In practice:
- Scientific papers: Usually "metre" (international standard)
- US publications: Usually "meter"
- International Bureau (BIPM): Uses "metre"
- Both are 100% correct
Other metric units with dual spellings:
- Liter / Litre
- Centimeter / Centimetre
- Kilometer / Kilometre
Remember: The spelling doesn't affect the measurement - 1 meter = 1 metre = 1 m
How do you convert meters to inches?
To convert meters to inches, multiply by approximately 39.3701.
Conversion formula: inches = meters × 39.3701
Examples:
- 1 meter = 39.37 inches
- 2 meters = 78.74 inches
- 5 meters = 196.85 inches
- 0.5 meters = 19.69 inches
- 1.5 meters = 59.06 inches
Reverse conversion (inches to meters):
- 1 inch = 0.0254 meters (exactly)
- 12 inches (1 foot) = 0.3048 meters
- 36 inches (1 yard) = 0.9144 meters
Why 39.37?
- 1 meter = 100 cm
- 1 inch = 2.54 cm (exactly)
- 100 cm ÷ 2.54 cm/inch = 39.37 inches
Quick mental math:
- 1 meter ≈ 40 inches (close enough for rough estimates)
- 2.5 cm ≈ 1 inch, so 100 cm ≈ 40 inches
Use our meter to inches converter for precise conversions.
What is 2 meters in feet and inches?
2 meters = 6 feet 6.74 inches (or approximately 6 feet 7 inches)
Calculation:
- 2 meters = 6.56168 feet
- 6 full feet = 6 feet
- 0.56168 feet × 12 inches/foot = 6.74 inches
- Result: 6 feet 6.74 inches ≈ 6' 7"
Common 2-meter comparisons:
- Standard doorway height: 2-2.1 meters (6'7" - 6'11")
- Tall person height: 2 meters is very tall (99th percentile)
- Basketball player: Many NBA players are around 2 meters
- High jump bar: Elite athletes clear around 2 meters
Rounded conversions:
- 2.0 m = 6' 7"
- 2.1 m = 6' 11"
- 2.2 m = 7' 3"
Quick reference:
- 1.5 m = 4' 11"
- 1.8 m = 5' 11" (average adult male height)
- 2.0 m = 6' 7"
- 2.5 m = 8' 2"
Convert any height: meters to feet and inches
How many meters is a football field?
American Football:
- Playing field: 100 yards = 91.44 meters
- With end zones: 120 yards = 109.73 meters
- Width: 53.33 yards = 48.76 meters
Soccer/Football (International):
- Length: 100-110 meters (typical), 90-120 meters (FIFA rules)
- Width: 64-75 meters (typical), 45-90 meters (FIFA rules)
- Standard pitch: 105 × 68 meters
Common comparisons:
- 100 meters ≈ 1 American football field (length only, not counting end zones)
- 100 meters = 109.4 yards (9.4 yards longer than American football field)
- "100-meter dash" ≈ Length of American football field + 9 yards
Useful reference: "100 meters" is a standard way to visualize distance - slightly longer than an American football field.
Why is the meter important?
The meter is the foundation of the metric system, used by 95% of the world's population and essential for global science, trade, and communication.
Scientific importance:
- Base unit of SI system (international standard)
- Defined by fundamental constant (speed of light)
- Essential for all scientific research
- Enables global collaboration
Practical importance:
- Universal measurement standard
- Simplifies international trade
- Decimal-based (easy calculations)
- Used in manufacturing, construction, medicine
Global standardization:
- Ensures products fit across borders
- Aircraft, ships, vehicles have standard dimensions
- Medical equipment is universally compatible
- Scientific data can be shared internationally
Historical significance:
- Represents the Enlightenment ideal of universal standards
- First measurement based on nature (Earth meridian)
- Now based on fundamental physics (speed of light)
- Symbol of international cooperation
Modern life:
- GPS and navigation systems
- International sports records
- Global supply chains
- Scientific advancement
Bottom line: The meter makes global communication, commerce, and science possible.
About Fathom (fath)
How many feet are in a fathom?
Exactly 6 feet = 1 fathom.
This is the defining relationship. The fathom was standardized to 6 feet during medieval English measurement standardization.
How many meters are in a fathom?
1 fathom = 1.8288 meters (exactly).
This conversion uses the international foot definition: 1 foot = 0.3048 meters (exactly).
Calculation: 6 feet × 0.3048 m/ft = 1.8288 m
Is the fathom an SI unit?
No, the fathom is not an SI unit.
It belongs to the imperial and U.S. customary systems. The SI unit of length is the meter.
International usage: The International Hydrographic Organization recommends meters for nautical charts, but fathoms remain legal and common in U.S. and some British waters.
Is the fathom still commonly used today?
Yes, in specific maritime contexts, especially in the United States.
Still common:
- U.S. NOAA nautical charts (many coastal charts)
- Recreational boating in the U.S.
- Commercial fishing fleets
- Maritime tradition and literature
Declining usage:
- International shipping (uses meters)
- Most modern navies (switched to meters)
- New chart production (increasingly metric)
Result: Fathoms persist in American waters and traditional maritime communities but are gradually being replaced by meters in international contexts.
Where does the word "fathom" come from?
From Old English "fæthm" (outstretched arms, embrace).
Etymology:
- Proto-Germanic: *faþmaz (embrace, armful)
- Old English: fæthm (span of outstretched arms)
- Middle English: fadme, fathme
- Modern English: fathom
Original meaning: The distance between fingertips when a person extends both arms horizontally—roughly 6 feet for an average man.
Verb form: "To fathom" originally meant "to measure depth with outstretched arms," later metaphorically "to comprehend deeply" (exploring the depths of understanding).
Why are anchor chains measured in shackles, not fathoms?
Both are used, but shackles are standard for large vessels.
Shackle definition: 1 shackle = 15 fathoms = 90 feet = 27.43 meters
Reason: Anchor chains are physically connected with shackle links every 15 fathoms. These physical shackles allow disconnection for maintenance and provide visual/tactile markers when deploying chain.
Usage:
- Small vessels: Anchor chain length in fathoms
- Large vessels and navies: Anchor chain length in shackles
Example: "Deploy 5 shackles" = 75 fathoms = 450 feet of chain
How deep is "full fathom five"?
5 fathoms = 30 feet = 9.144 meters.
Shakespeare's The Tempest: Ariel's song describes a drowned man lying at the bottom, 5 fathoms below the surface.
Context: 30 feet is deep enough that:
- Surface light barely reaches the body
- Free diving without equipment is challenging
- The body would be difficult to recover without specialized equipment
This depth creates the eerie, unreachable quality of Ariel's description.
Can I convert my depth sounder from fathoms to meters?
Yes, most modern depth sounders (fishfinders, chartplotters) allow unit selection.
Typical options:
- Feet
- Fathoms
- Meters
How to change (general steps):
- Access settings menu
- Find "Units" or "Depth Units"
- Select preferred unit (fathoms, feet, or meters)
- Save settings
Check manual: Specific instructions vary by manufacturer (Garmin, Lowrance, Raymarine, Furuno, etc.).
What's the difference between fathoms and cable lengths?
Both are nautical length units, but they measure different things:
Fathom:
- 6 feet / 1.8288 meters
- Primarily for depth measurement
Cable length:
- UK: 608 feet = 185.3 meters (1/10 nautical mile)
- US (historical): 720 feet = 219.5 meters (120 fathoms)
- Primarily for horizontal distance (anchor cable, ship-to-ship spacing)
Confusion: The term "cable" sometimes referred to 100 or 120 fathoms of anchor cable, but the standardized "cable length" unit differs from this.
Do submarines still use fathoms?
Historically yes, but modern submarines use meters.
World War II era: U.S. and British submarines recorded depths in fathoms (e.g., "Dive to 50 fathoms").
Modern practice:
- U.S. Navy: Switched to feet and meters for submarine operations
- International: Nearly all modern navies use meters
Reason for change: International standardization, digital instrumentation, and NATO interoperability drove metrication.
Conversion Table: Meter to Fathom
| Meter (m) | Fathom (fath) |
|---|---|
| 0.5 | 0.273 |
| 1 | 0.547 |
| 1.5 | 0.82 |
| 2 | 1.094 |
| 5 | 2.734 |
| 10 | 5.468 |
| 25 | 13.67 |
| 50 | 27.34 |
| 100 | 54.681 |
| 250 | 136.702 |
| 500 | 273.403 |
| 1,000 | 546.807 |
People Also Ask
How do I convert Meter to Fathom?
To convert Meter to Fathom, enter the value in Meter in the calculator above. The conversion will happen automatically. Use our free online converter for instant and accurate results. You can also visit our length converter page to convert between other units in this category.
Learn more →What is the conversion factor from Meter to Fathom?
The conversion factor depends on the specific relationship between Meter and Fathom. You can find the exact conversion formula and factor on this page. Our calculator handles all calculations automatically. See the conversion table above for common values.
Can I convert Fathom back to Meter?
Yes! You can easily convert Fathom back to Meter by using the swap button (⇌) in the calculator above, or by visiting our Fathom to Meter converter page. You can also explore other length conversions on our category page.
Learn more →What are common uses for Meter and Fathom?
Meter and Fathom are both standard units used in length measurements. They are commonly used in various applications including engineering, construction, cooking, and scientific research. Browse our length converter for more conversion options.
For more length conversion questions, visit our FAQ page or explore our conversion guides.
Helpful Conversion Guides
Learn more about unit conversion with our comprehensive guides:
📚 How to Convert Units
Step-by-step guide to unit conversion with practical examples.
🔢 Conversion Formulas
Essential formulas for length and other conversions.
⚖️ Metric vs Imperial
Understand the differences between measurement systems.
⚠️ Common Mistakes
Learn about frequent errors and how to avoid them.
All Length Conversions
Other Length Units and Conversions
Explore other length units and their conversion options:
- Kilometer (km) • Meter to Kilometer
- Hectometer (hm) • Meter to Hectometer
- Decimeter (dm) • Meter to Decimeter
- Centimeter (cm) • Meter to Centimeter
- Millimeter (mm) • Meter to Millimeter
- Inch (in) • Meter to Inch
- Foot (ft) • Meter to Foot
- Yard (yd) • Meter to Yard
- Mile (mi) • Meter to Mile
- Nautical Mile (NM) • Meter to Nautical Mile
Verified Against Authority Standards
All conversion formulas have been verified against international standards and authoritative sources to ensure maximum accuracy and reliability.
National Institute of Standards and Technology — Official US standards for length measurements
Bureau International des Poids et Mesures — International System of Units official documentation
Last verified: December 3, 2025